Cisco 300-610 exam validates a candidate’s ability to test your knowledge of data center infrastructure design, including network, compute, storage network and automation.
To pass the 300-610 DCID Designing Cisco Data Center Infrastructure, a considerable amount of practices should be necessary. SPOTO intends to enable you to succeed in the test by offering all the relevant Cisco 300-610 exam dumps to you.
Now, evaluate yourself with the practice exam below. If you need more 300-610 dumps, contact us with the lowest pricing.
Question 1
When planning to deploy a load-balancing service as a managed node, which ACI configuration must be included?
A. BGP ECMP
B. Layer 4 to Layer 7 device package
C. inline load-balancing device
D. ITD
Correct Answer: B
Question 2
An engineer is installing a Cisco Nexus 7000 Series Switch with F2-Series /O Module. The company's strict security policy requires that the port be in-band. The engineer must also keep these considerations in mind:
1. The customer's security requirements mandate the use of a secure management mechanism that supports authentication and encryption.
2. The port should support management over IP.
Which port type must be used to meet these requirements?
A. Ethernet port
B. connectivity management port
C. management port
D. console port
Correct Answer: C
Question 3
An engineer must design a secondary site to prevent a catastrophic primary site failure. The applications must communicate across sites via the data link layer of the OSI model. The Layer 3 transport that is available for this solution consists of 10-Gb connections over Layer 3.
Which two solutions meet these requirements? (Choose two.)
A. IS-IS
B. VXLAN EVPN
C. OTV
D. vPC
E. OSPF
Correct Answer: BD
Question 4
A network engineer must select a high availability feature for their data center. The solution must ensure network resilience, reduce network instability for Layer 3 routing protocols, and meet these requirements:
1. The device must notify its neighbors when the control plane is undergoing a restart
2. The solution must suppress routing flaps in case of stateful switchovers
Which solution must be implemented?
A. BFD
B. HSRP
C. ISSU
D. NSF
Correct Answer: D
Question 5
An engineer must design Layer 2 connectivity for a subnet between two data centers. The engineer must ensure seamless host mobility and optimal first-hop routing. Which attribute must be synchronized across all data centers to achieve this goal?
A. anycast gateway MAC
B. multicast group
C. NX-OS version
D. DCNM to manage both fabrics
Correct Answer: A
Question 6
A customer deploys 32 virtualization hosts in a Cisco UCS domain. All hosts run in the same cluster and have identical hardware specifications. The operating system requires that all firmware is consistent across the hosts for driver support. The customer must provision additional interfaces later for expandability. Which feature of Cisco UCS Manager meets these requirements?
A. Initial vNIC Template
B. Initial Service Profile Template
C. Updating vNIC Template
D. Updating Service Profile Template
Correct Answer: D
Question 7
A set of virtual machines must be live migrated from a data center to a disaster recovery site. The data center and disaster recovery sites are connected through an Inter-Pod Network topology. The gateway address of the virtual machine is the same across the data center and disaster recovery. Which Cisco Nexus feature supports this requirement?
A. FabricPath
B. VXLAN EVPN
C. FHRP
D. VPLS
Correct Answer: B
Question 8
An engineer must connect a Cisco UCS B-Series based system to an existing large storage area network fabric. The deployment must support hardware-based load balancing, prevent Fibre Channel domain ID exhaustion, and enable all blade servers to be in the same VSAN. Which set of actions meets the requirements?
A. Configure Ethernet end-host automatic load balancing on the fabric interconnect. Set NL port mode on the SAN switch.
B. Place all interfaces that face the fabric interconnects in the same VSAN. Disable zoning for the VSAN.
C. Enable Fibre Channel end-host mode on the fabric interconnect and NPIV mode on the SAN switch. Create an F Port channel that faces the fabric interconnect.
D. Connect the fabric interconnect to the E Ports on the SAN switch. Create a SAN port channel.
Correct Answer: C
Question 9
A SAN fabric is built between a pair of Cisco MDS 9000 Series Switches. The requirement is for the ISL to use the VSAN ID to forward traffic from multiple VSANs across the same physical link. Additionally, the Fibre Channel trace feature must be supported. Which ISL interface parameters are required to meet these requirements?
A. switchport mode E switchport mode trunk vsan
B. switchport mode TE switchport mode trunk vsan
C. switchport mode TE switchport mode trunk
D. switchport mode E switchport mode trunk
Correct Answer: A
Question 10
A company is using Cisco UCS and wants a network orchestration solution to meet these requirements:
1. centrally manage compute and storage platforms
2. reduce the time it takes to detect an outage
3. easily exchange data with TAC to reduce resolution times
The company does not have in-house knowledge about scripting. Which solution must the company choose?
A. Cisco HyperFlex
B. Cisco DCNM
C. Cisco Intersight
D. Cisco UCS Central
Correct Answer: D
Conclusion
CCNP 300-610 dumps are sure to help you understand the test better. You will quickly acquire the abilities that will help you succeed on the test and in the job if you practice more.
