Cisco 300-410 exam validates a candidate’s ability to deploy and troubleshoot advanced routing technologies and services, including Layer 3, VPN services, infrastructure security, infrastructure services, and infrastructure automation.
To pass the 300-410 ENARSI Implementing Cisco Enterprise Advanced Routing and Services, a great number of practices should be required. SPOTO aims to help you to succeed in the exam by supplying all the necessary Cisco 300-410 exam dumps to you.
Now, assess yourself by the practice test below. If you need more 300-410 dumps, contact us with the lowest price.
Question 1
What are two MPLS label characteristics? (Choose two.)
A. The label edge router swaps labels on the received packets.
B. Labels are imposed in packets after the Layer 3 header.
C. LDP uses TCP for reliable delivery of information.
D. An MPLS label is a short identifier that identifies a forwarding equivalence class.
E. A maximum of two labels can be imposed on an MPLS packet
Correct Answer: CD
Question 2
What is a function of BFD?
A. failure detection dependent on routing protocols and media types
B. peer recovery after a Layer 2 adjacency failure
C. failure detection independent of routing protocols and media types
D. peer recovery after a Layer 3 protocol adjacency failure
Correct Answer: C
Question 3
How is VPN routing information distributed in an MPLS network?
A. It is controlled using of VPN target communities.
B. The top level of the customer data packet directs it to the correct CE device.
C. It is established using VPN IPsec peers.
D. It is controlled through the use of RD.
Correct Answer: A
Question 4
Which function does LDP provide in an MPLS topology?
A. It exchanges routes for MPLS VPNs across different VRFs.
B. It provides a means for LSRs to exchange IP routes.
C. It provides hop-by-hop forwarding in an MPLS topology for LSRs.
D. It enables a MPLS topology to connect multiple VPNs to P routers.
Correct Answer: C
Question 5
An engineer creates a Cisco DNA Center cluster with three nodes, but all the services are running on one host node. Which action resolves this issue?
A. Enable service distribution from the Systems 360 page.
B. Restore the link on the switch interface that is connected to a cluster link on the Cisco DNA Center.
C. Click the master host node with al the services and select services to be moved to other hosts.
D. Click system updates, and upgrade to the latest version of Cisco DNA Center.
Correct Answer: A
Question 6
An engineer configured Reverse Path Forwarding on an interface and noticed that the routes are dropped when a route lookup fails on that interface for a prefix that is available in the routing table. Which interface configuration resolves the issue?
A. ip verify unicast source reachable-via allow-default
B. ip verify unicast source reachable-via l2-src
C. ip verify unicast source reachable-via rx
D. ip verify unicast source reachable-via any
Correct Answer: D
Question 7
After some changes in the routing policy, it is noticed that the router in AS 45123 is being used as a transit AS router for several service providers. Which configuration ensures that the branch router in AS 45123 advertises only the local networks to all SP neighbors?
A. ip as-path access-list 1 permit.*
!
router bgp 45123
neighbor SP-Neighbors filter-list 1 out
B. ip as-path access-list 1 permit ^45123$
!
router bgp 45123
neighbor SP-Neighbors filter-list 1 out
C. ip as-path access-list 1 permit ^45123
!
router bgp 45123
neighbor SP-Neighbors filter-list 1 out
D. ip as-path access-list 1 permit ^$
!
router bgp 45123
neighbor SP-Neighbors filter-list 1 out
Correct Answer: D
Question 8
What is the function of BFD?
A. It provides uniform failure detection regardless of media type.
B. It negotiates to the highest version if the neighbor version differs.
C. It provides uniform failure detection on the same media type.
D. It creates high CPU utilization on hardware deployments.
Correct Answer: A
Question 9
Which table is used to map the packets in an MPLS LSP that exit from the same interface, via the same next hop, and have the same queuing policies?
A. RIB
B. CEF
C. LDP
D. FEC
Correct Answer: D
Question 10
An engineer received a ticket about a router that has reloaded. The monitoring system graphs show different traffic patterns between logical and physical interfaces when the router is rebooted. Which action resolves the issue?
A. Configure the snmp ifindex persist command globally.
B. Clear the logical interfaces with snmp ifindex clear command
C. Configure the snmp ifindex persist command on the physical interfaces.
D. Trigger a new snmpwalk from the monitoring system to synchronize interface OIDs.
Correct Answer: A
Conclusion
CCNP 300-410 dumps are guaranteed to help you have a better understanding of the exam. By practicing more, you will soon master the skills that will help you succeed on the exam and on the job.
