• ccie wireless v3 lab equipment

  • 1679 Reviews
  • Computer network arp protocol works in Ethernet,ccie wireless v3 lab equipment, wireless network communication with each other can this protocol be used? Reader questions: Some questions about Ethernet and wireless networks: 1.

ccie wireless v3 lab equipment

    CCIE Wireless 400-351 Lab

    The CCIE Wireless Lab exam is made up of two modules:
  • 1: Diagnostic (the act or process of identifying the root cause)
  • 2: Configuration & Troubleshooting (implement and fix)


  • Get Dumps

1. CCIE Wireless V5.0 LAB Examination Content:

2. CCIE Wireless LAB Study Plan

CCIE Written LAB Exam Format.


3. CCIE Wireless LAB Solutions DEMO


Section 1:Network Infrastructure
Section 1.1 Troubleshoot the network at Headquarters so that for the connections between the 3650s and the 4500s, corporate wireless user traffic for VLANs 101 and 102 only, use G1/0/20 on the 3650s as the primary forwarding link. G1/0/21 on 3650-1 and 3650-2 must be used exclusively as a backup connection.
Notes:
✔️Use an STP method that prioritizes how the local switches (that is, the 3650s) elect the root port.
✔️Configuration should be applied to the G1/0/21 interfaces only.
Solution:
3650-1
interface GigabitEthernet1/0/21
spanning-tree vlan (….) cost (…….)
3650-2
interface GigabitEthernet1/0/21
spanning-tree vlan (….) cost (…….)

Section 1.2 Routing is not working as expected at Headquarters as not all subnets are reachable from the HQ switches. Troubleshoot this problem so that routing works between all lab subnets.
✔️Only static routing is permitted to solve this task. Do not use the “ip default-gateway” command.