DON'T WANT TO MISS A THING?

Certification Exam Passing Tips

Latest exam news and discount info

Curated and up-to-date by our experts

Yes, send me the newsletter

Unlock Success with 300-410 Pracatice Questions, Cisco Enterprise 300-410 ENARSI | SPOTO

Unlock success on the challenging Cisco 300-410 ENARSI certification exam with our high-quality practice questions. Our free test bank offers a vast collection of realistic sample questions, mock exams, and exam dumps covering advanced routing technologies, implementation scenarios, and troubleshooting concepts. These online exam questions and practice tests accurately mirror the actual 300-410 exam content and format. Detailed explanations accompany each exam question, reinforcing your understanding and facilitating effective exam preparation. This powerful exam simulator replicates the real testing environment with exam questions and answers for an authentic exam practice experience. Leverage these premium exam materials, including practice resources, exam questions and answers, and mock tests, to identify knowledge gaps, gain mastery of the objectives, and confidently earn the prestigious Cisco Certified Specialist - Enterprise Advanced Infrastructure Implementation certification.
Take other online exams
Question #1
You have implemented IPv6 automatic 6-to-4 tunneling between three IPv6 subnets as shown in the network exhibit. (Click the Exhibit(s) button.) You have used the following commands to implement the automatic 6-to-4 tunnel: Your supervisor has assigned the task of verifying the automatic 6-to-4 tunnel to one of your colleagues. Your colleague runs the show running-config command and finds that incorrect IPv6 addresses have been assigned to the tunnel interfaces of the routers. Which of the following IPv6 ad
A. 2002::c0a8:2d01/64 to the Fa0/1 interface of rtrA
B. 2002:c0a8:4b01::1/64 to the Fa0/1 interface of rtrB
C. 2002:c0a8:7d01::1/64 to the Fa0/1 interface of rtrC
D. 2002:c0a8:4b01::1/64 to the Fa0/1 interface of rtrA
View answer
Correct Answer: BC
Question #2
An engineer configures a static route on a router, but when the engineer checks the route to the destination, a different next hop is chosen. What is the reason for this?
A. Dynamic routing protocols always have priority over static routes
C. The configured AD for the static route is higher than the AD of OSPF
D. The syntax of the static route is not valid, so the route is not considered
View answer
Correct Answer: B
Question #3
What does the imp-null tag represent in the MPLS VPN cloud?A. Pop the label
B. Impose the label
C. Include the EXP bit
D. Exclude the EXP bit
View answer
Correct Answer: A
Question #4
An engineer configured the wrong default gateway for the Cisco DNA Center enterprise interface during the install. Which command must the engineer run to correct the configuration?
A. sudo maglev-config update
B. sudo maglev install config update
C. sudo maglev reinstallD
View answer
Correct Answer: A
Question #5
During troubleshooting it was discovered that the device is not reachable using a secure web browser. What is needed to fix the problem?
A. permit tcp port 443
B. permit udp port 465
C. permit tcp port 465
D. permit tcp port 22
View answer
Correct Answer: B
Question #6
Which of the following statements represent characteristics of an automatic 6to4 tunnel through an IPv4 network? (Choose all that apply.)
A. There is a NAT-PT router on either end of the tunnel
B. There is a dual stack router on either end of the tunnel
C. Each 6to4 site will have a /48 prefix
D. Each 6to4 site will have a /16 prefix
E. The IPv4 addresses of the edge routers are part of the site prefix
F. The IPv6 addresses of the sending and receiving IPv6 hosts are part of the site prefix
View answer
Correct Answer: BCE
Question #7
An engineer is trying to configure local authentication on the console line, but the device is trying to authenticate using TACACS+. Which action produces the desired configuration?A. Add the aaa authentication login default none command to the global configuration.
B. Replace the capital “C” with a lowercase “c” in the aaa authentication login Console local command
C. Add the aaa authentication login default group tacacs+ local-case command to the global configuration
D. Add the login authentication Console command to the line configuration
View answer
Correct Answer: B
Question #8
Which of the following IPv6/IPv4 interoperability techniques routes both IP versions simultaneously?
A. NAT-PT
B. Dual stack
C. 6to4 tunnels
D. Teredo
View answer
Correct Answer: B
Question #9
Which subnet is redistributed from EIGRP to OSPF routing protocols?
A. 10
B. 10
D. 10
View answer
Correct Answer: D
Question #10
R2 has a locally originated prefix 192.168.130.0/24 and has these configurations: What is the result when the route-map OUT command is applied toward an eBGP neighbor R1 (1.1.1.1) by using the neighbor 1.1.1.1 route-map OUT out command?
A. R1 sees 192
B. R1 does not accept any routes other than 192
C. R1 does not forward traffic that is destined for 192
D. Network 192
View answer
Correct Answer: A
Question #11
R2 is a route reflector, and R1 and R3 are route reflector clients. The route reflector learns the route to 172.16.25.0/24 from R1, but it does not advertise to R3. What is the reason the route is not advertised?A. R2 does not have a route to the next hop, so R2 does not advertise the prefix to other clients.
B. Route reflector setup requires full IBGP mesh between the routers
C. In route reflector setup, only classful prefixes are advertised to other clients
D. In route reflector setups, prefixes are not advertised from one client to another
View answer
Correct Answer: C
Question #12
Which statement about R1 is true?
A. OSPF redistributes RIP routes only if they have a tag of one
B. RIP learned routes are distributed to OSPF with a tag value of one
C. R1 adds one to the metric for RIP learned routes before redistributing to OSPF
D. RIP routes are redistributed to OSPF without any changes
View answer
Correct Answer: D
Question #13
An automatic IPv4-compatible IPv6 tunnel exists between two IPv6 networks. The two IPv6 networks belong to different BGP autonomous systems (AS). The tunnel source has the IPv4 address 172.168.111.65/24 and the tunnel destination has the IPv4 address 172.168.222.80/24. Which of the following statements is TRUE about the tunnel source and tunnel destination IPv6 addresses? (Choose two.)
A. the IPv6 address of the tunnel source is 172
B. the IPv6 address of the tunnel source is ::172
C. the IPv6 address of the tunnel destination is 172
D. the IPv6 address of the tunnel destination is ::172
View answer
Correct Answer: BD
Question #14
Which of the following statements are TRUE about manually configured IPV4-to-IP6 tunnels and GRE tunnels? (Choose two.)
A. Manually configured tunnels use the tunnel mode ipv6ip command, while GRE tunnels use the tunnel mode gre ip command
B. Manually configured tunnels support IPv6 IGPs, while GRE tunnels do not
C. Manually configured tunnels block IPv6 multicasts, while GRE forwards them
D. Manually configured tunnels do not support multiple passenger protocols, while GRE tunnels support them
View answer
Correct Answer: AD
Question #15
An engineer is trying to generate a summary route in OSPF for network 10.0.0.0/8, but the summary route does not show up in the routing table. Why is the summary route missing?
A. The summary-address command is used only for summarizing prefixes between areas
B. The summary route is visible only in the OSPF database, not in the routing table
C. There is no route for a subnet inside 10
D. The summary route is not visible on this router, but it is visible on other OSPF routers in the same area
View answer
Correct Answer: C
Question #16
Which configuration denies Telnet traffic to router 2 from 198A:0:200C::1/64? A.B.
C.
D.
View answer
Correct Answer: D
Question #17
When provisioning a device in Cisco DNA Center, the engineer sees the error message “Cannot select the device. Not compatible with template”. What is the reason for the error?
A. The template has an incorrect configuration
B. The software version of the template is different from the software version of the device
C. The changes to the template were not committed
D. The tag that was used to filter the templates does not match the device tag
View answer
Correct Answer: B
Question #18
After applying IPsec, the engineer observed that the DMVPN tunnel went down, and both spoke-to-spoke and hub were not establishing. Which two actions resolve the issue? (Choose two.)A. Change the mode from mode tunnel to mode transport on R3.
B. Remove the crypto isakmp key cisco address 10
C. Configure the crypto isakmp key cisco address 192
D. Configure the crypto isakmp key cisco address 0
E. Change the mode from mode transport to mode tunnel on R2
View answer
Correct Answer: B
Question #19
Automatic 6-to-4 tunnels exist between dual-stack routers (A, B, and C). One router has the IPv6 address, 2002:D030:6BC0:173C::26:37D0/48 Which of the following addresses is the IPv4 address of the router with the IPv6 address 2002:D030:6BC0:173C::26:37D0/48?
A. 10
B. 10
C. 208
D. 208
View answer
Correct Answer: C
Question #20
You have recently joined a company as the network administrator. You have been asked to complete the configuration on the border routers for an automatic 6-to- 4 tunnel between several IPv6 network domains. The commands that are currently configured on the routers are as follows: ipv6 route tunnel interface tunnel ipv6 address tunnel source Which of the following additional commands is required to complete the configuration of automatic 6-to-4 tunnel on the border routers?
A. tunnel mode ipv6ip
B. tunnel mode ipv6ip 6to4
C. tunnel mode ipv6ip auto-tunnel
D. tunnel mode ipv6ip isatap
View answer
Correct Answer: B
Question #21
Which method changes the forwarding decision that a router makes without first changing the routing table or influencing the IP data plane?
A. nonbroadcast multiaccess
B. packet switching
C. policy-based routingD
View answer
Correct Answer: C

View Answers after Submission

Please submit your email and WhatsApp to get the answers of questions.

Note: Please make sure your email ID and Whatsapp are valid so that you can get the correct exam results.

Email:
Whatsapp/phone number:


Copyright © 2024. Designer by SPOTO Official Website. All Rights Reserved.