DON'T WANT TO MISS A THING?

Certification Exam Passing Tips

Latest exam news and discount info

Curated and up-to-date by our experts

Yes, send me the newsletter

Free Cisco 300-730 SVPN Exam Questions & Sample Practice Test

 Exam Name Implementing Secure Solutions with Virtual Private Networks (300-730 SVPN)
Exam Number300-730 SVPN
Exam Price$300 USD
Exam Duration90 minutes
Number of Questions55-65
Passing Score(750-850 / 1000 Approx.)

Before you embark on your Cisco CCNP Security (300-730) certification journey, questions about the test format, the types of questions you'll face, their difficulty level, and the time required to complete the exam can be daunting. Fret not, these Cisco Certified Network Professional Security (SVPN) sample questions and demo exam can be your guiding light in dispelling these doubts and preparing you to face the challenge head-on.

The surefire route to conquering the CCNP 300-730 exam lies in the continuous enhancement of your knowledge. To assess your learning and pinpoint areas that require improvement while familiarizing yourself with the actual exam format, we strongly recommend that you practice with our Premium CCNP 300-730 Certification Practice Exam. This practice test stands as a cornerstone in your preparation strategy for the Implementing Secure Solutions with Virtual Private Networks (SVPN) exam, aiding you in identifying your strengths and weaknesses, honing your time management skills, and giving you a realistic glimpse of the score you can anticipate achieving.

Take other online exams

Question #1
Which remote access VPN technology requires the use of the IPsec-proposal configuration option?
A. lientless SSLVPN
B. SLVPN Full Tunnel
C. KEv2-based VPN
D. KEv1-based VPN
View answer
Correct Answer: C

View The Updated 300-730 SVPN Exam Questions

SPOTO Provides 100% Real 300-730 SVPN Exam Questions for You to Pass Your 300-730 SVPN Exam!

Question #2
An organization wants to distribute remote access VPN load across 12 VPN headend locations supporting 25,000 simultaneous users. Which load balancing method meets this requirement?
A. qual cost, multipath load balancing
B. NS-based load balancing
C. nyConnect native load balancing
D. ne VPN profile per site
View answer
Correct Answer: A
Question #3
A network engineer has set up a FlexVPN server to terminate multiple FlexVPN clients. The VPN tunnels are established without issue. However, when a Change of Authorization is issued by the RADIUS server, the FlexVPN server does not update the authorization of connected FlexVPN clients. Which action resolves this issue?
A. dd the aaa server radius dynamic-author command on the FlexVPN clients
B. dd the aaa server radius dynamic-author command on the FlexVPN server
C. ix the RADIUS key mismatch between the RADIUS server and FlexVPN clients
D. ix the RADIUS key mismatch between the RADIUS server and FlexVPN server
View answer
Correct Answer: B
Question #4
A network engineer is implementing a FlexVPN tunnel between two Cisco IOS routers. The FlexVPN tunnels will terminate on encrypted traffic on an interface configured with an IP MTU of 1500, and the company has a security policy to drop fragmented traffic coming into or leaving the network. The tunnel will be used to transfer TFTP data between users and internal servers. When the TFTP traffic is not traversing a VPN, it can have a maximum IP packet size of 1500. Assuming the encrypted payload will add 90 bytes, which configuration allows TFTP traffic to traverse the FlexVPN tunnel without being dropped?
A. et the tunnel IP MTU to 1500
B. et the tunnel tcp adjust-mss to 1360
C. et the tunnel tcp adjust-mss to 1460
D. et the tunnel IP MTU to 1400
View answer
Correct Answer: D
Question #5
An engineer has successfully established a Phase 1 and Phase 2 tunnel between two sites. Site A has internal subnet 192.168.0.0/24 and Site B has internal subnet 10.0.0.0/24. The engineer notices that no packets are decrypted at Site B. Pings to 192.168.0.1 from internal Site B devices make it to the Site B router, and the Site. A router has incrementing encrypt and decrypt counters. What must be done to ensure bidirectional communication between both sites?
A. nable PFS on the headend device
B. odify the routing at Site B so that traffic is sent to Site A
C. llow protocol ESP or AH on the firewall in front of the Site B router
D. onfigure the correct DH group on both devices
View answer
Correct Answer: B
Question #6
A clientless SSLVPN is set up to allow remote users to access internal HTTPS webservers. Users can access all but one server and see the message "Connection Failed. Server 192.188.0.101 unavailable" Pings between the Cisco ASA and the webserver are successful, and users can connect to the webserver when they use their computer in the internal network. Which action resolves this issue?
A. dd an SSL cipher that can be negotiated with the webserver to the Cisco ASA
B. dd the http 192
C. onfigure routing on the Cisco ASA so it can reach the webserver
D. onfigure a DNS server that can resolve the webserver domain on the Cisco ASA
View answer
Correct Answer: A
Question #7
Which feature allows a DMVPN Phase 3 spoke to switch to an alternate hub when the primary hub is unreachable?
A. HRP shortcut
B. ackup NHS
C. er-tunnel jitter probes
D. ulticast PIM
View answer
Correct Answer: B
Question #8
After a user configures a connection profile with a bookmark list and tests the clientless SSLVPN connection, all of the bookmarks are grayed out. What must be done to correct this behavior?
A. onfigure a DNS server on the Cisco ASA and verify it has a record for the web server
B. pecify the correct port for the web server under the bookmark
C. erify HTTP/HTTPS connectivity between the Cisco ASA and the web server
D. pply the bookmark to the correct group policy
View answer
Correct Answer: A
Question #9
An engineer has configured Cisco AnyConnect VPN using IKEv2 on a Cisco IOS router. The user cannot connect in the Cisco AnyConnect client, but receives an alert message "Use a browser to gain access." Which action does the engineer take to resolve this issue?
A. orrect the URL address
B. eset user login credentials
C. isable the HTTP server
D. onnect using HTTPS
View answer
Correct Answer: C
Question #10
When a FlexVPN is configured, which two components must be configured for IKEv2? (Choose two.)
A. ethod
B. rofile
C. reference
D. ersistence
E. roposal
View answer
Correct Answer: BE

View The Updated CCNP Exam Questions

SPOTO Provides 100% Real CCNP Exam Questions for You to Pass Your CCNP Exam!

View Answers after Submission

Please submit your email and WhatsApp to get the answers of questions.

Note: Please make sure your email ID and Whatsapp are valid so that you can get the correct exam results.

Email:
Whatsapp/phone number: