DON'T WANT TO MISS A THING?

Certification Exam Passing Tips

Latest exam news and discount info

Curated and up-to-date by our experts

Yes, send me the newsletter

Comprehensive Fortinet NSE7_SDW-7.2 Practice Tests and Exam Resources, Fortinet NSE 7 SD-WAN | SPOTO

Prepare thoroughly for the Fortinet NSE 7 - SD-WAN 7.2 certification exam with SPOTO's comprehensive practice tests and exam resources. This certification validates your expertise in the Fortinet SD-WAN solution, assessing your knowledge in integration, administration, troubleshooting, and central management within secure SD-WAN environments using FortiOS 7.2. SPOTO's practice tests cover a wide range of exam questions and scenarios, ensuring you're well-prepared for the real exam. Our exam materials, including sample questions and exam answers, provide in-depth insights into key concepts and strategies. Utilize our exam simulator and mock exams to simulate exam conditions and enhance your exam readiness. With SPOTO's high-quality practice tests and exam resources, you'll have the tools and knowledge to confidently pass the certification exam with a 100% success rate. Trust SPOTO for your Fortinet NSE7_SDW-7.2 exam preparation needs.
Take other online exams
Question #1
Based on output shown in the exhibit, which two commands can be used by SD-WAN rules? (Choose two.)
A. set cost 15
B. set source 100
C. set priority 10
D. set load-balance-mode source-ip-based
View answer
Correct Answer: A
Question #2
Refer to exhibits. Exhibit A, which shows the SD-WAN performance SLA and exhibit B shows the health of the participating SD-WAN members. Based on the exhibits, which statement is correct?
A. The dead member interface stays unavailable until an administrator manually brings the interface back
B. Port2 needs to wait 500 milliseconds to change the status from alive to dead
C. The SLA state of port2 has exceeded three consecutive unanswered requests from the SLA server
D. Check interval is the time to wait before a packet sent by a member interface considered as lost
View answer
Correct Answer: CD
Question #3
The exhibit shows the SD-WAN rule status and configuration. Based on the exhibit, which change in the measured latency will make T_MPLS_0 the new preferred member?
A. When T_INET_0_0 and T_MPLS_0 have the same latency
B. When T_MPLS_0 has a latency of 100 ms
C. When T_INET_0_0 has a latency of 250 ms
D. When T_N1PLS_0 has a latency of 80 ms
View answer
Correct Answer: D
Question #4
Which two statements about SD-WAN central management are true? (Choose two.)
A. The objects are saved in the ADOM common object database
B. It does not support meta fields
C. It uses templates to configure SD-WAN on managed devices
D. It supports normalized interfaces for SD-WAN member configuration
View answer
Correct Answer: A
Question #5
Exhibit B – Exhibit A shows the system interface with the static routes and exhibit B shows the firewall policies on the managed FortiGate. Based on the FortiGate configuration shown in the exhibits, what issue might you encounter when creating an SD-WAN zone for port1 and port2?
A. port1 is assigned a manual IP address
B. port1 is referenced in a firewall policy
C. port2 is referenced in a static route
D. port1 and port2 are not administratively down
View answer
Correct Answer: B
Question #6
What is the route-tag setting in an SD-WAN rule used for?
A. To indicate the routes for health check probes
B. To indicate the destination of a rule based on learned BGP prefixes
C. To indicate the routes that can be used for routing SD-WAN traffic
D. To indicate the members that can be used to route SD-WAN traffic
View answer
Correct Answer: B
Question #7
Two hub-and-spoke groups are connected through a site-to-site IPsec VPN between Hub 1 and Hub 2. The administrator configured ADVPN on both hub-and-spoke groups. Which two outcomes are expected if a user in Toronto sends traffic to London? (Choose two.)
A. London generates an IKE information message that contains the Toronto public IP address
B. Traffic from Toronto to London triggers the dynamic negotiation of a direct site-to-site VPN
C. Toronto needs to establish a site-to-site tunnel with Hub 2 to bypass Hub 1
D. The first packets from Toronto to London are routed through Hub 1 then to Hub 2
View answer
Correct Answer: B
Question #8
Which two statements are correct when traffic matches the implicit SD-WAN rule? (Choose two.)
A. The sdwan_service_id flag in the session information is 0
B. All SD-WAN rules have the default setting enabled
C. Traffic does not match any of the entries in the policy route table
D. Traffic is load balanced using the algorithm set for the v4-ecmp-mode setting
View answer
Correct Answer: A
Question #9
Which two protocols in the IPsec suite are most used for authentication and encryption? (Choose two.)
A. Encapsulating Security Payload (ESP)
B. Secure Shell (SSH)
C. Internet Key Exchange (IKE)
D. Security Association (SA)
View answer
Correct Answer: A
Question #10
Exhibit. Which conclusion about the packet debug flow output is correct?
A. The total number of daily sessions for 10
B. The packet size exceeded the outgoing interface MTU
C. The number of concurrent sessions for 10
D. The number of concurrent sessions for 10
View answer
Correct Answer: C
Question #11
Based on the exhibit, which two actions does FortiGate perform on sessions after a firewall policy change? (Choose two.)
A. FortiGate flushes all sessions
B. FortiGate terminates the old sessions
C. FortiGate does not change existing sessions
D. FortiGate evaluates new sessions
View answer
Correct Answer: C
Question #12
Refer to exhibits. Exhibit A shows the SD-WAN performance SLA and exhibit B shows the SD-WAN interface and the static routes configuration. Port1 and port2 are member interfaces of the SD-WAN, and port2 becomes a dead member after reaching the failure thresholds. Which statement about the dead member is correct?
A. Port2 might become alive when a single response is received from an SLA server
B. Dead members require manual administrator access to bring them back alive
C. Subnets 100
D. SD-WAN interface becomes disabled and port1 becomes the WAN interface
View answer
Correct Answer: AC
Question #13
Which are two benefits of using CLI templates in FortiManager? (Choose two.)
A. You can reference meta fields
B. You can configure interfaces as SD-WAN members without having to remove references first
C. You can configure FortiManager to sync local configuration changes made on the managed device, to the CLI template
D. You can configure advanced CLI settings
View answer
Correct Answer: A
Question #14
Which two conclusions for traffic that matches the traffic shaper are true? (Choose two.)
A. The traffic shaper drops packets if the bandwidth is less than 2500 KBps
B. The measured bandwidth is less than 100 KBps
C. The traffic shaper drops packets if the bandwidth exceeds 6250 KBps
D. The traffic shaper limits the bandwidth of each source IP to a maximum of 6250 KBps
View answer
Correct Answer: B
Question #15
Which configuration change is required if the responder FortiGate uses a dynamic routing protocol to exchange routes over IPsec?
A. type must be set to static
B. mode-cfg must be enabled
C. exchange-interface-ip must be enabled
D. add-route must be disabled
View answer
Correct Answer: D
Question #16
Refer to the exhibits. Exhibit A Exhibit B - Exhibit A shows the configuration for an SD-WAN rule and exhibit B shows the respective rule status, the routing table, and the member status. The administrator wants to understand the expected behavior for traffic matching the SD-WAN rule. Based on the exhibits, what can the administrator expect for traffic matching the SD-WAN rule?
A. The traffic will be load balanced across all three overlays
B. The traffic will be routed over T_INET_0_0
C. The traffic will be routed over T_MPLS_0
D. The traffic will be routed over T_INET_1_0
View answer
Correct Answer: C
Question #17
Refer to exhibits. Exhibit A shows the firewall policy and exhibit B shows the traffic shaping policy. The traffic shaping policy is being applied to all outbound traffic; however, inbound traffic is not being evaluated by the shaping policy. Based on the exhibits, what configuration change must be made in which policy so that traffic shaping can be applied to inbound traffic?
A. The guaranteed-10mbps option must be selected as the per-IP shaper option
B. The guaranteed-10mbps option must be selected as the reverse shaper option
C. A new firewall policy must be created and SD-WAN must be selected as the incoming interface
D. The reverse shaper option must be enabled and a traffic shaper must be selected
View answer
Correct Answer: AE
Question #18
What are the two minimum configuration requirements for an outgoing interface to be selected once the SD-WAN logical interface is enabled? (Choose two.)
A. Specify outgoing interface routing cost
B. Configure SD-WAN rules interface preference
C. Select SD-WAN balancing strategy
D. Specify incoming interfaces in SD-WAN rules
View answer
Correct Answer: CD
Question #19
An administrator is troubleshooting SD-WAN on FortiGate. A device behind branch1_fgt generates traffic to the 10.0.0.0/8 network. The administrator expects the traffic to match SD-WAN rule ID 1 and be routed over T_INET_0_0. However, the traffic is routed over T_INET_1_0. Based on the output shown in the exhibit, which two reasons can cause the observed behavior? (Choose two.)
A. The traffic matches a regular policy route configured with T_INET_1_0 as the outgoing device
B. T_INET_1_0 has a lower route priority value (higher priority) than T_INET_0_0
C. T_INET_0_0 does not have a valid route to the destination
D. T_INET_1_0 has a higher member configuration priority than T_INET_0_0
View answer
Correct Answer: A

View Answers after Submission

Please submit your email and WhatsApp to get the answers of questions.

Note: Please make sure your email ID and Whatsapp are valid so that you can get the correct exam results.

Email:
Whatsapp/phone number:


Copyright © 2024. Designer by SPOTO Official Website. All Rights Reserved.