DON'T WANT TO MISS A THING?

Certification Exam Passing Tips

Latest exam news and discount info

Curated and up-to-date by our experts

Yes, send me the newsletter

Cisco 300-410 ENARSI Exam Questions, Practice Tests & Study Materials

Exam NameImplementing Cisco Enterprise Advanced Routing and Services
Exam Code300-410 ENARSI
Exam Duration90 minutes
Number of Questions55-65 questions
Passing Score750-850 / 1000
Practice ExamCisco Certified Network Professional Enterprise Practice Test

 

Are you gearing up to take the Cisco 300-410 ENARSI exam and seeking the most effective exam preparation strategies? Look no further! Our comprehensive guide is here to help you succeed. When it comes to exam preparation, having access to exam questions, question and answer resources, practice exams, dumps questions, practice questions, and practice tests is crucial.

The Cisco 300-410 ENARSI exam is a critical step in your networking career, and we understand the importance of passing it with flying colors. Our guide is designed to provide you with the tools and knowledge needed to excel. Whether you're looking for practice questions to gauge your understanding or exam dumps to simulate the real test environment, we've got you covered.

Stay ahead of the competition and boost your confidence with our expertly curated resources. Let's dive into the world of Cisco 300-410 ENARSI exam preparation and set you on the path to success!

 

Take other online exams
Question #1
What is the result when the route-map OUT command is applied toward an eBGP neighbor R1 (1.1.1.1) by using the neighbor 1.1.1.1 route-map OUT out command?
A. R1 sees 192
B. R1 does not accept any routes other than 192
C. R1 does not forward traffic that is destined for 192
D. Network 192
View answer
Correct Answer: A

View The Updated 300-410 ENARSI Exam Questions

SPOTO Provides 100% Real 300-410 ENARSI Exam Questions for You to Pass Your 300-410 ENARSI Exam!

Get 300-410 ENARSI Practice Test
Question #2
Which method changes the forwarding decision that a router makes without first changing the routing table or influencing the IP data plane?
A. nonbroadcast multiaccess
B. packet switching
C. policy-based routing
D. forwarding information base
View answer
Correct Answer: C
Question #3
Which action resolves the adjacency issue?
A. Configure the same autonomous system numbers
B. Match the hello interval timers
C. Match the authentication keys
D. Configure the same EIGRP process IDs
View answer
Correct Answer: A
Question #4
BGP and EIGRP are mutually redistributed on R3, and EIGRP and OSPF are mutually redistributed on R1. Users report packet loss and interruption of service to applications hosted on the 10.1.1.0/24 prefix. An engineer tested the link from R3 to R4 with no packet loss present but has noticed frequent routing changes on R3 when running the debug ip route command. Which action stabilizes the service?
A. Reduce frequent OSPF SPF calculations on R3 that cause a high CPU and packet loss on traffic traversing R3
B. Tag the 10
C. Place an OSPF distribute-list outbound on R3 to block the 10
D. Repeat the test from R4 using ICMP ping on the local 10
View answer
Correct Answer: B
Question #5
A network administrator reviews the branch router console log to troubleshoot the OSPF adjacency issue with the DR router. Which action resolves this issue?
A. Stabilize the DR site flapping link to establish OSPF adjacency
B. Advertise the branch WAN interface matching subnet for the DR site
C. Configure the WAN interface for DR site in the related OSPF area
D. Configure matching hello and dead intervals between sites
View answer
Correct Answer: B
Question #6
Refer to the exhibit. An engineer is trying to block the route to 192.168.2.2 from the routing table by using the configuration that is shown. The route is still present in the routing table as an OSPF route. Which action blocks the route?
A. Use an extended access list instead of a standard access list
B. Change sequence 10 in the route-map command from permit to deny
C. Use a prefix list instead of an access list in the route map
D. Add this statement to the route map: route-map RM-OSPF-DL deny 20
View answer
Correct Answer: C
Question #7
What is a prerequisite for configuring BFD?
A. Jumbo frame support must be configured on the router that is using BFD
B. All routers in the path between two BFD endpoints must have BFD enabled
C. Cisco Express Forwarding must be enabled on all participating BFD endpoints
D. To use BFD with BGP, the timers 3 9 command must first be configured in the BGP routing process
View answer
Correct Answer: C
Question #8
Refer to the exhibit. An engineer is trying to generate a summary route in OSPF for network 10.0.0.0/8, but the summary route does not show up in the routing table. Why is the summary route missing?
A. The summary-address command is used only for summarizing prefixes between areas
B. The summary route is visible only in the OSPF database, not in the routing table
C. There is no route for a subnet inside 10
D. The summary route is not visible on this router, but it is visible on other OSPF routers in the same area
View answer
Correct Answer: C

View The Updated CCNP Exam Questions

SPOTO Provides 100% Real CCNP Exam Questions for You to Pass Your CCNP Exam!

Get CCNP Practice Test

View Answers after Submission

Please submit your email and WhatsApp to get the answers of questions.

Note: Please make sure your email ID and Whatsapp are valid so that you can get the correct exam results.

Email:
Whatsapp/phone number:


Copyright © 2024. Designer by SPOTO Official Website. All Rights Reserved.