Boost Your Certification Prep with Fortinet NSE7_EFW-7.2 Mock Tests, Fortinet NSE 7 - Enterprise Firewall | SPOTO

Preparing for the challenging Fortinet NSE7 Enterprise Firewall 7.2 exam? Maximize your chances of success with SPOTO's realistic mock tests and exam simulators. Our comprehensive exam dumps contain thousands of premium practice questions and answers covering enterprise security infrastructure with Fortinet solutions. Regularly updated exam materials ensure you're studying the most current objectives. In-depth mock exams simulate the real NSE7 EFW 7.2 testing environment, providing an accurate assessment of your readiness. Identify knowledge gaps with SPOTO's detailed explanations and verified sample questions. Don't go into your certification exam underprepared - boost your confidence and skills with our proven mock tests today!

Take other online exams

Question #1

Refer to the exhibit, which shows the output of a debug command. Which two statements about the output are true? (Choose two.)

A. The local FortiGate OSPF router ID is 0

B. Port4 is connected to the OSPF backbone area

C. In the network connected to port4, two OSPF routers are down

D. The local FortiGate is the backup designated router

View answer

Correct Answer: A

View The Updated Fortinet NSE7_EFW-7.2 Exam Questions

SPOTO Provides 100% Real Fortinet NSE7_EFW-7.2 Exam Questions for You to Pass Your Fortinet NSE7_EFW-7.2 Exam!

Get Fortinet NSE7_EFW-7.2 Practice Test

Question #2

The logs in a FSSO collector agent (CA) are showing the following error: failed to connect to registry: PIKA1026 (192.168.12.232) What can be the reason for this error?

A. The CA cannot resolve the name of the workstation

B. The FortiGate cannot resolve the name of the workstation

C. The remote registry service is not running in the workstation 192

D. The CA cannot reach the FortiGate with the IP address 192

View answer

Correct Answer: AB

Question #3

View the exhibit, which contains the output of diagnose sys session stat, and then answer the question below. Which statements are correct regarding the output shown? (Choose two.)

A. There are 0 ephemeral sessions

B. All the sessions in the session table are TCP sessions

C. No sessions have been deleted because of memory pages exhaustion

D. There are 166 TCP sessions waiting to complete the three-way handshake

View answer

Correct Answer: A

Question #4

View the exhibit, which contains the output of diagnose sys session list, and then answer the question below. If the HA ID for the primary unit is zero (0), which statement is correct regarding the output?

A. This session is for HA heartbeat traffic

B. This session is synced with the slave unit

C. The inspection of this session has been offloaded to the slave unit

D. This session cannot be synced with the slave unit

View answer

Correct Answer: B

Question #5

Refer to the exhibit, which shows a FortiGate configuration. An administrator is troubleshooting a web filter issue on FortiGate. The administrator has configured a web filter profile and applied it to a policy; however, the web filter is not inspecting any traffic that is passing through the policy. What must the administrator change to fix the issue?

A. The administrator must increase webfilter-timeout

B. The administrator must disable webfilter-force-off

C. The administrator must change protocol to TCP

D. The administrator must enable fortiguard-anycast

View answer

Correct Answer: A

Question #6

View the exhibit, which contains a partial web filter profile configuration, and then answer the question below. Which action will FortiGate take if a user attempts to access www.dropbox.com, which is categorized as File Sharing and Storage?

A. FortiGate will exempt the connection based on the Web Content Filter configuration

B. FortiGate will block the connection based on the URL Filter configuration

C. FortiGate will allow the connection based on the FortiGuard category based filter configuration

D. FortiGate will block the connection as an invalid URL

View answer

Correct Answer: B

Question #7

Refer to the exhibit, which contains the partial output of a diagnose command. Based on the output, which two statements are correct? (Choose two.)

A. Anti-replay is enabled

B. The remote gateway IP is 10

C. DPD is disabled

D. Quick mode selectors are disabled

View answer

Correct Answer: AC

Question #8

Which two tasks are automated using the Install Wizard on FortiManager? (Choose two.)

A. Preview pending configuration changes for managed devices

B. Add devices to FortiManager

C. Import policy packages from managed devices

D. Install configuration changes to managed devices

E. Import interface mappings from managed devices

View answer

Correct Answer: D

Question #9

A FortiGate has two default routes: All Internet traffic is currently using port1. The exhibit shows partial information for one sample session of Internet traffic from an internal user: What would happen with the traffic matching the above session if the priority on the first default route (IDd1) were changed from 5 to 20?

A. The session would be deleted, and the client would need to start a new session

B. The session would remain in the session table, and its traffic would start to egress from port2

C. The session would remain in the session table, but its traffic would now egress from both port1 and port2

D. The session would remain in the session table, and its traffic would still egress from port1

View answer

Correct Answer: AB

Question #10

An administrator has configured a dial-up IPsec VPN with one phase 2, extended authentication (XAuth) and IKE mode configuration. The administrator has also enabled the IKE real time debug: diagnose debug application ike-1 diagnose debug enable In which order is each step and phase displayed in the debug output each time a new dial-up user is connecting to the VPN?

A. Phase1; IKE mode configuration; XAuth; phase 2

B. Phase1; XAuth; IKE mode configuration; phase2

C. Phase1; XAuth; phase 2; IKE mode configuration

D. Phase1; IKE mode configuration; phase 2; XAuth

View answer

Correct Answer: B

Question #11

View the exhibit, which contains the partial output of an IKE real-time debug, and then answer the question below. Why didn’t the tunnel come up?

A. The pre-shared keys do not match

B. The remote gateway’s phase 2 configuration does not match the local gateway’s phase 2 configuration

C. The remote gateway’s phase 1 configuration does not match the local gateway’s phase 1 configuration

D. The remote gateway is using aggressive mode and the local gateway is configured to use man mode

View answer

Correct Answer: AD

Question #12

Examine the output from the BGP real time debug shown in the exhibit, then the answer the question below: Which statements are true regarding the output in the exhibit? (Choose two.)

A. BGP peers have successfully interchanged Open and Keepalive messages

B. Local BGP peer received a prefix for a default route

C. The state of the remote BGP peer is OpenConfirm

D. The state of the remote BGP peer will go to Connect after it confirms the received prefixes

View answer

Correct Answer: D

Question #13

Examine the following routing table and BGP configuration; then answer the question below. TheBGP connection is up, but the local peer is NOT advertising the prefix 192.168.1.0/24. Which configuration change will make the local peer advertise this prefix?

A. Enable the redistribution of connected routers into BGP

B. Enable the redistribution of static routers into BGP

C. Disable the setting network-import-check

D. Enable the setting ebgp-multipath

View answer

Correct Answer: C

Question #14

When using the SSL certificate inspection method for HTTPS traffic, how does FortiGate filter web requests when the browser client does not provide the server name indication (SNI) extension?

A. FortiGate uses CN information from the Subject field in the server’s certificate

B. FortiGate switches to the full SSL inspection method to decrypt the data

C. FortiGate blocks the request without any further inspection

D. FortiGate uses the requested URL from the user’s web browser

View answer

Correct Answer: AD

Question #15

View the exhibit, which contains the output of get sys ha status, and then answer the question below. Which statements are correct regarding the output? (Choose two.)

A. The slave configuration is not synchronized with the master

B. The HA management IP is 169

C. Master is selected because it is the only device in the cluster

D. port 7 is used the HA heartbeat on all devices in the cluster

View answer

Correct Answer: AD

Question #16

Refer to exhibit, which contains the output of a BGP debug command. Which statement explains why the state of the 10.200.3.1 peer is Connect?

A. The local router is receiving BGP keepalives from the remote peer, but the local peer has not received the OpenConfirm yet

B. The TCP session to 10

C. The local router is receiving the BGP keepalives from the peer, but it has not received a BGP prefix yet

D. The local router has received the BGP prefixes from the remote peer

View answer

Correct Answer: A

Question #17

View the central management configuration shown in the exhibit, and then answer the question below. Which server will FortiGate choose for antivirus and IPS updates if 10.0.1.243 is experiencing an outage?

A. 10

B. One of the public FortiGuard distribution servers

C. 10

D. 10

View answer

Correct Answer: BC

Question #18

What configuration changes can reduce the memory utilization in a FortiGate? (Choose two.)

A. Reduce the session time to live

B. Increase the TCP session timers

C. Increase the FortiGuard cache time to live

D. Reduce the maximum file size to inspect

View answer

Correct Answer: A

Question #19

What is the diagnose test application ipsmonitor 99 command used for?

A. To enable IPS bypass mode

B. To provide information regarding IPS sessions

C. To disable the IPS engine

D. To restart all IPS engines and monitors

View answer

Correct Answer: AC

Question #20

Which two configuration settings change the behavior for content-inspected traffic while FortiGate is in conserve mode? (Choose two.)

A. IPS failopen

B. mem failopen

C. AV failopen

D. UTM failopen

View answer

Correct Answer: AC

View The Updated Fortinet Exam Questions

SPOTO Provides 100% Real Fortinet Exam Questions for You to Pass Your Fortinet Exam!

Get Fortinet Practice Test

View Answers after Submission

Please submit your email and WhatsApp to get the answers of questions.

Note: Please make sure your email ID and Whatsapp are valid so that you can get the correct exam results.

Email:

Whatsapp/phone number:

DON'T WANT TO MISS A THING?

100% Pass Cisco, PMP, CISA, CISM, AWS Practice test on SALE!
Get Now

Boost Your Certification Prep with Fortinet NSE7_EFW-7.2 Mock Tests, Fortinet NSE 7 - Enterprise Firewall | SPOTO

View The Updated Fortinet NSE7_EFW-7.2 Exam Questions

View The Updated Fortinet Exam Questions

View Answers after Submission

DON'T WANT TO MISS A THING?

100% Pass Cisco, PMP, CISA, CISM, AWS Practice test on SALE! Get Now

Boost Your Certification Prep with Fortinet NSE7_EFW-7.2 Mock Tests, Fortinet NSE 7 - Enterprise Firewall | SPOTO

View The Updated Fortinet NSE7_EFW-7.2 Exam Questions

View The Updated Fortinet Exam Questions

View Answers after Submission

100% Pass Cisco, PMP, CISA, CISM, AWS Practice test on SALE!
Get Now