DON'T WANT TO MISS A THING?

Certification Exam Passing Tips

Latest exam news and discount info

Curated and up-to-date by our experts

Yes, send me the newsletter

300-410 Certification Exam Questions & Practice Tests, Cisco Enterprise 300-410 ENARSI | SPOTO

Master the Cisco 300-410 ENARSI certification exam with our meticulously crafted exam materials and study resources. Our free test bank offers a wealth of premium sample questions, mock exams, and practice tests that accurately mirror the real exam content on advanced routing technologies, implementation, and troubleshooting. These exam dumps and online exam questions cover all key areas you need to excel. Each exam question is accompanied by comprehensive explanations to reinforce your understanding and facilitate effective exam preparation. This exam simulator with exam questions and answers provides an authentic testing environment for realistic practice. Leverage these invaluable exam materials, exam practice resources, and exam questions and answers to confidently earn the prestigious Cisco Certified Specialist – Enterprise Advanced Infrastructure Implementation certification.
Take other online exams
Question #1
What is the result of applying this configuration?
A. The router can form BGP neighborships with any other device
B. The router cannot form BGP neighborships with any other device
C. The router cannot form BGP neighborships with any device that is matched by the access list named “BGP”
D. The router can form BGP neighborships with any device that is matched by the access list named “BGP”
View answer
Correct Answer: D
Question #2
After redistribution is enabled between the routing protocols; PC2, PC3, and PC4 cannot reach PC1. Which action can the engineer take to solve the issue so that all the PCs are reachable?
A. Set the administrative distance 100 under the RIP process on R2
B. Filter the prefix 10
C. Filter the prefix 10
D. Redistribute the directly connected interfaces on R2
View answer
Correct Answer: B
Question #3
Users report that IP addresses cannot be acquired from the DHCP server. The DHCP server is configured as shown. About 300 total nonconcurrent users are using this DHCP server, but none of them are active for more than two hours per day. Which action fixes the issue within the current resources?
A. Modify the subnet mask to the network 192
B. Configure the DHCP lease time to a smaller value
C. Configure the DHCP lease time to a bigger value
D. Add the network 192
View answer
Correct Answer: B
Question #4
Why is the remote NetFlow server failing to receive the NetFlow data?
A. The flow exporter is configured but is not used
B. The flow monitor is applied in the wrong direction
C. The flow monitor is applied to the wrong interface
D. The destination of the flow exporter is not reachable
View answer
Correct Answer: D
Question #5
Which command displays the IP routing table information that is associated with VRF-Lite?
A. show ip vrf
B. show ip route vrf
C. show run vrf
D. show ip protocols vrf
View answer
Correct Answer: A
Question #6
Which statement about R1 is true?
A. OSPF redistributes RIP routes only if they have a tag of one
B. RIP learned routes are distributed to OSPF with a tag value of one
C. R1 adds one to the metric for RIP learned routes before redistributing to OSPF
D. RIP routes are redistributed to OSPF without any changes
View answer
Correct Answer: B
Question #7
Which statement about IPv6 RA Guard is true?
A. It does not offer protection in environments where IPv6 traffic is tunneled
B. It cannot be configured on a switch port interface in the ingress direction
C. Packets that are dropped by IPv6 RA Guard cannot be spanned
D. It is not supported in hardware when TCAM is programmed
View answer
Correct Answer: A
Question #8
Which configuration enabled the VRF that is labeled “Inet” on FastEthernet0/0?
A. R1(config)# ip vrf InetR1(config-vrf)#ip vrf FastEthernet0/0
B. R1(config)#ip vrf Inet FastEthernet0/0
C. R1(config)# ip vrf InetR1(config-vrf)#interface FastEthernet0/0 R1(config-if)#ip vrf forwarding Inet
D. R1(config)#router ospf 1 vrf InetR1(config-router)#ip vrf forwarding FastEthernet0/0
View answer
Correct Answer: C
Question #9
Which control plane policy limits BGP traffic that is destined to the CPU to 1 Mbps and ignores BGP traffic that is sent at higher rate?
A. policy-map SHAPE_BGP
B. policy-map LIMIT_BGP
C. policy-map POLICE_BGP
D. policy-map COPP
View answer
Correct Answer: AB
Question #10
Drag and drop the SNMP attributes in Cisco IOS devices from the left onto the correct SNMPv2c or SNMPV3 categories on the right.
A. Mastered
B. Not Mastered
View answer
Correct Answer: A

View Answers after Submission

Please submit your email and WhatsApp to get the answers of questions.

Note: Please make sure your email ID and Whatsapp are valid so that you can get the correct exam results.

Email:
Whatsapp/phone number:


Copyright © 2024. Designer by SPOTO Official Website. All Rights Reserved.