Where Could You Get More Information And Study Material for CCIE Collaboration Lab?

CCNA 200-301

CCNA 200-301

CCNP Enterprise

CCNP Enterprise

CCNP Security

CCNP Security

CCIE Enterprise Lab

CCIE Enterprise Lab

CCIE Security Lab

CCIE Security Lab

CCNP Service Provider

CCNP Service Provider

CCNP Data Center

CCNP Data Center

CCNP Collaboration

CCNP Collaboration

CCIE DC Lab

CCIE DC Lab

ic_r
ic_l
Where Could You Get More Information And Study Material for CCIE Collaboration Lab?
images

The Cisco CCIE Collaboration lab exam is believed to be an eight-hour exam, which would be based on hands-on and requires candidates in order to configure and troubleshoot a series of complex network scenarios. The candidate would be needed to understand how the network and service components are going to interoperate, and how the functional requirements translate into specific device configurations. Knowledge of troubleshooting would be considered as an important skill and candidates which would be expected to diagnose and solve issues as part of the CCIE Collaboration lab exam. So, if you wish to have the study materials for the CCIE Collaboration Lab, join the SPOTO and acquire their study dumps.

Lab Exam Format

The CCIE Collaboration would be unifying of written and lab exam topics into a unique curriculum, while it would be disclosed explicitly which domains are going to pertain to which exam, and the relative weight of each domain. Additionally, the lab v2.0 exam would be consisting of three modules:

Module 1: Troubleshooting

The Troubleshooting module is going to deliver, the incidents that would be independent of each other, which would be meaning that the resolution of one incident doesn’t depend on the resolution of another. The topology that would be used in the Troubleshooting module is different than the topology which would be used in the Configuration module. The devices and appliances which would be used in the Troubleshooting module are virtualized completely. The length of the Troubleshooting module which would be about two hours; however, the candidate would borrow up to 30 minutes from the Configuration module. In other words, the candidate would be able to choose to use the extra 30 minutes on Troubleshooting module or Configuration module.

Module 2: Diagnostics

The new Diagnostic module would be lasting up to 60 minutes in length, focuses on the skills which would be required to diagnose properly issues in a collaboration network, without having access to actual collaboration network devices as well as applications. While these diagnostic activities are going to be naturally part of overall troubleshooting skills, they would have been designed as a separate lab module because the format of the items would be significantly different. In the Troubleshooting module, the candidate is going to need to be able to troubleshoot as well as it would resolve issues on actual collaboration network devices and applications.

The Diagnostic module doesn’t provide actual access to any devices or applications; rather, it would be providing the candidate with a set of documentation that would be representing a snapshot of a realistic situation that might present itself at a given point in time to a collaboration engineer in the process of investigation. The Diagnostic module question, which is also known as called tickets, contains a set of documentation which the candidate would have to understand the problem scenario. Then, in turn, the candidate would be analyzing and correlating the information, after discerning between valuable as well as worthless information, to make the right choice among the predefined options listed in the item. 

Module 3: Configuration

The Configuration module would be conducted in a topology that would closely resemble an actual production Collaboration network with various key components. Although the major part of this module is going to be based on virtual instances of Cisco collaboration appliances, you might be asked about working with physical devices as well.

If you wish to acquire more knowledge, you need to join the preparation courses which are being offered by the SPOTO. When it comes to Cisco Certification, SPOTO is considered to be the best one for training.  

More you may be interested:

1. How to Recertify CCIE Lab Certification?

2. Overview of the CCIE R&S Lab Equipment

3. How to Pass the CCIE Wireless Lab Exam?

4. Step by Step Guide -Cisco CCIE LAB Booking Process

5. The Quick Reference Guide to Prepare for the CCIE Lab Exam