CCIE Routing and Switching Lab Blueprint.

CCNA 200-301

CCNA 200-301

CCNP Enterprise

CCNP Enterprise

CCNP Security

CCNP Security

CCIE Enterprise Lab

CCIE Enterprise Lab

CCIE Security Lab

CCIE Security Lab

CCNP Service Provider

CCNP Service Provider

CCNP Data Center

CCNP Data Center

CCNP Collaboration

CCNP Collaboration

CCIE DC Lab

CCIE DC Lab

ic_r
ic_l
CCIE Routing and Switching Lab Blueprint.
images

CCIE R&S Overview:

Cisco Certified Internetwork Expert Routing and Switching Certification are shortly known as the CCIE Routing and Switching Certification is going to certify that the candidate has obtained the skills that are required of expert-level network engineers in order to plan, troubleshoot and operate complex, converged network infrastructure. This certification is in high demand and is considered to be the most sought-after certification. So, to gain it also, wouldn’t be that much easy and hence you are required to gain the best training possible, you could gain it by joining the training courses offered by the SPOTO.

Prerequisites:

Essentially there are no formal prerequisites considered for the CCIE Routing and Switching Certification. Other professional certifications or training courses are not considered as a prerequisite. Instead, the candidates are recommended to first clear a written qualification exam and then the corresponding hands-on lab exam. They are also expected to have an in-depth understanding of the topics in the exam blueprints and are also strongly encouraged to have three to five years of job experience before they attempt for this certification.

CCIE Routing and Switching Written Exam

The candidates are required to first pass the two-hour, written qualification exam, which would be covering the networking concepts and some equipment commands before they make themselves eligible to schedule the lab exam.

CCIE Routing and Switching Lab Exam

The eight-hour lab exam is going to test the ability to configure actual equipment and troubleshoot the network in a timed-based test situation. You should first make an initial attempt at the CCIE Routing and Switching lab exam within 18-months of clearing the CCIE Routing and Switching written exam. Candidates who do not clear must reattempt the lab exam within 12 months of their last attempt in order to make their written exam to remain valid. If you do not clear the lab exam within three years of clearing the written exam, you would have to retake the written exam before being allowed to attempt the lab exam again.

About the CCIE Routing and Switching Lab Exam:

The CCIE Routing and Switching Lab exam are considered to be an eight-hour, hands-on exam which would be required the candidates to configure and troubleshoot a series of complex networks to given specifications. Knowledge of troubleshooting skills is considered quite important and candidates are expected to be able to diagnose as well as solve the issues as a part of the CCIE Routing and Switching lab exam. You wouldn’t be allowed to configure end-user systems, but are responsible for all devices that would be residing in the network or hubs, etc. Point values and testing criteria would also be provided to the candidates. More detail could be found on the Routing and Switching Lab Exam Blueprint and the list of Lab Equipment as well as the IOS Versions.

CCIE Routing and Switching Lab Exam Topics

The following topics are generally considered as the guidelines for the content that would be likely to be included on the exam. However, other involved topics might also appear on any specific delivery of the exam. In order to better reflect the contents of the exam and also for the clarity purposes, the guidelines below may change at any time without giving the notice to the candidates.

1.0  Layer 2 Technologies     20%

2.0  Layer 3 Technologies     40%

3.0  VPN Technologies     20%

4.0  Infrastructure Security    05%

5.0  Infrastructure Services    15%

The above is about the content of ccie r&s lab blueprint. So, if you want to gain an in-depth knowledge of the above-mentioned topics, you could visit the official site of Cisco and gain it. Whereas if you wish to have the CCIE Routing and Switching Certification in a single attempt, you could gain it by having trained with the expert training program offered by the SPOTO.