CCIE R&S Lab Exam V5.0 Expanded Blueprint

CCNA 200-301

CCNP Enterprise

CCNP Security

CCIE Enterprise Lab

CCIE Security Lab

CCNP Service Provider

CCNP Data Center

CCNP Collaboration

CCIE DC Lab

CCIE R&S Lab Exam V5.0 Expanded Blueprint

2019-09-30

While Cisco’s official blueprint for v5 would be now considered to be more detailed than it ever been in the past, it would be still lacking some details in certain areas, for instance, “Implementing, optimizing and troubleshooting filtering with any routing protocol.” Additionally, it would be considered as very much difficult to utilize Cisco’s blueprint for a study plan as it would be standing in its current linear format. For example “Layer 3 multicast” would be listed before “Fundamental routing concepts”, which from a learning perspective wouldn’t be making any sense, because you should understand unicast routing fully before you would learn multicast routing. Now, we wouldn’t be able to discuss the full expanded blueprint of the CCIE R&S Lab Exam v5, but we have provided some sample of the real blueprint. For full expanded blueprint, check out the courses, which are offered in the SPOTO Club’s CCIE Routing and Switching Courses Section.

The following topics generally considered as the guidelines for the content which would be included on the exam. However, other interconnected topics might also appear on any specific delivery of the exam. In order to better reflect the contents of the exam as well as for clarity purposes, the guidelines below might be changed at any time without any notice. Hence, if you wish to have the proper guidance, you should get yourself enrolled yourself in the courses, which are being offered by a good and reliable training provider, like the SPOTO Club.

Now, we would be looking at the sample of the CCIE Routing and Switching Lab Exam V5.0 Expanded Blueprint

RSv5 Expanded Blueprint

20% 1.0 Layer 2 Technologies”

1.1 LAN switching technologies

1.1.a Implement and troubleshoot switch administration

1.1.a (i) Managing MAC address table

1.1.a (ii) errdisable recovery

1.1.a (iii) L2 MTU

1.1.b Implement and troubleshoot layer 2 protocols

1.1.b (i) CDP, LLDP

1.1.b (ii) UDLD

1.1.c Implement and troubleshoot VLAN

1.1.c (i) access ports

1.1.c (ii) VLAN database

1.1.c (iii) normal, extended VLAN, voice VLAN

1.1.d Implement and troubleshoot trunking

1.1.d (i) VTPv1, VTPv2, VTPv3, VTP pruning

1.1.d (ii) dot1Q

1.1.d (iii) Native VLAN

1.1.d (iv) Manual pruning

1.1.e Implement and troubleshoot EtherChannel

1.1.e (i) LACP, PAgP, manual

1.1.e (ii) layer 2, layer 3

1.1.e (iii) load-balancing

1.1.e (iv) EtherChannel misconfiguration guard

1.1.f Implement and troubleshoot spanning-tree

1.1.f (i) PVST+/RPVST+/MST

1.1.f (ii) port priority, switch priority, path cost, STP timers

1.1.f (iii) port fast, BPDUguard, BPDUfilter

1.1.f (iv) loop guard, root guard

1.1.g Implement and troubleshoot other LAN switching technologies

1.1.g (i) SPAN, RSPAN, ERSPAN

1.2 Layer 2 Multicast

1.2.a Implement and troubleshoot IGMP

1.2.a (I) IGMPv1, IGMPv2, IGMPv3

1.2.a (ii) IGMP snooping

1.2.a (iii) IGMP querier

1.2.a (iv) IGMP filter

1.2.a (v) IGMP proxy

1.3 Layer 2 WAN circuit technologies

1.3.a Implement and troubleshoot HDLC

1.3.b Implement and troubleshoot PPP

1.3.b (i) authentication (PAP, CHAP)

1.3.b (ii) PPPoE

1.3.b (iii) MLPPP

1.4 Troubleshooting layer 2 technologies

1.4.a Use IOS troubleshooting tools

1.4.a (i) debug, conditional debug

1.4.a (ii) ping, traceroute with extended options

1.4.a (iii) Embedded packet capture

1.4.b Apply troubleshooting methodologies

1.4.b (i) Diagnosing the root cause of networking issue (analyze symptoms, identify and describe root cause)

1.4.b (ii) Designing and implementing valid solutions according to constraints

1.4.b (iii) Verify and monitor resolution

1.4.c Interpret packet capture

1.4.c (i) Using Wireshark trace analyzer

1.4.c (ii) Using IOS embedded packet capture

So, you would have a little bit of idea about what would be included in the CCIE Routing and Switching Lab Exam. If you wish to have the full version of the Expanded Blueprint, visit the webpage of SPOTO Club, and also check out the courses offered by us and why to select us.