How Does Cisco Grade CCIE Collaboration Lab Tests?

CCNA 200-301

CCNP Enterprise

CCNP Security

CCIE Enterprise Lab

CCIE Security Lab

CCNP Service Provider

CCNP Data Center

CCNP Collaboration

CCIE DC Lab

How Does Cisco Grade CCIE Collaboration Lab Tests?

2019-11-27

The Cisco CCIE Collaboration lab exam is formulated in an eight-hour, hands-on module, which requires candidates to configure, as well as troubleshoot a series of complex network scenarios. The candidates are going to need to understand how the network, as well as service components, would interoperate, and how the functional requirements would be translating into specific device configurations. Knowledge of troubleshooting is considered to be an important skill as well as candidates would be expected to diagnose as well as solving issues as part of the CCIE Collaboration lab exam. The candidate won’t configure all end-user systems; however, the candidate would be responsible for all devices residing in the network. So, if you have embarked on the journey of achieving the CCIE Certification, you should gain the study dumps offered by the SPOTO Club.

Scoring

In order to clear the lab exam, the candidates are required to meet these two conditions:

1. The total sum of all module scores would be required to be at least the minimum value of the overall cut score or higher.

2. The minimum cut score of each individual module would be required for achieving.

The reason for these criterions would be to prevent the candidate from passing the lab exam while failing or even bypassing a module, for example, the Diagnostic module.

The point value of each item in each lab module would be shown on the candidate guide, which would be provided at the lab exam. The points would be granted only when all the criteria of the item are met. No partial score would be granted on any item.

Lab Environment

The Cisco documentation is believed to be available in the lab room, but the exam assumes knowledge of the more common protocols and technologies. The documentation can be navigated using the index. Outside reference materials are considered to be going to be permitted in the lab room. You would then report any suspected equipment issues to the proctor during the exam; adjustments cannot be made once the exam is over.

Lab Exam Grading

The labs would be graded by proctors who are going to ensure that all the criteria are Pass/Fail as well as failing score reports indicate major topic areas where additional study, as well as preparation, may be useful.

Reevaluation of Lab Results

A Reread would be involving having the second proctor loads your configurations into a rack to re-create the test as well as re-score the entire exam. Rereads are also available for the Routing and Switching, as well as Service Provider technology tracks.

A Review involves would be having a second proctor verify your answers, as well as any applicable system-generated, debug data saved from your exam. Reviews are available for all of the above-mentioned tracks.

Payment Terms

Candidates to make your request within 14 days following the exam date by utilizing the "Request for Reread" link next to the lab record. A Reread would be costing about $1,000 USD and a Review is going to costs the candidates about $400 USD. Payment is going to be made online via credit card as well as the Reread or Review would be initiated upon successful payment. You might not cancel the appeal request once the process has been initiated. Refunds would be given only when results change from fail to pass.

CCIE Collaboration Lab exam isn’t going to be an easy task and requires lots and lots of studying and hard work. So, If you wish to achieve the above-mentioned certification in a single attempt, you should obtain the study dumps which are being offered at the SPOTO Club. When it comes to IT Certification, SPOTO Club Certification is the best.