DON'T WANT TO MISS A THING?

Certification Exam Passing Tips

Latest exam news and discount info

Curated and up-to-date by our experts

Yes, send me the newsletter

Unlock Success with CCNP 300-615 Pracatice Questions, Cisco Data Center 300-615 DCIT | SPOTO

Unlock your success in the CCNP 300-615 exam with our comprehensive collection of practice questions tailored for Cisco Data Center 300-615 DCIT certification. Our practice tests cover troubleshooting scenarios across network, compute platforms, storage network, automation, management, and operations within a data center infrastructure. Access our free test to assess your readiness and proficiency. With our exam dumps and exam answers, reinforce your preparation strategy effectively. Dive into the Troubleshooting Cisco Data Center Infrastructure course to acquire the essential skills and knowledge required for success. Utilize our exam simulator and online exam questions to simulate real exam environments, boosting your confidence for the actual exam. Trust SPOTO for top-tier resources to ensure your preparation is thorough and your success is unlocked in the CCNP 300-615 exam.
Take other online exams
Question #1
After the configuration is performed, guestshell continues to use 2%CPU. Which action resolves the issue?
A. Resync the database
B. Recreate the guestshell
C. Reboot the guestshell
D. Reboot the switch
View answer
Correct Answer: S

View The Updated 300-615 Exam Questions

SPOTO Provides 100% Real 300-615 Exam Questions for You to Pass Your 300-615 Exam!

Get 300-615 Practice Test
Question #2
A Fibre Channel interface on a Cisco Nexus 5000 Series Switch receives bit errors, and the switch disables the interface. A temporary workaround must be implemented before the root cause is identified. Which action does an engineer take to prevent this issue from reoccurring?
A. Verify that the SFPs are supported
B. Change the SFP to operate at 4 Gbps instead of 2 Gbps
C. Run the shutdown and then no shutdown command on the interface
D. Run the switchport ignore bit-errors command on the interface
View answer
Correct Answer: D
Question #3
Cisco UCS Manager is being upgraded using the Auto Install feature, but the FSM fails. Which action resolves the issue?
A. Acknowledge the primary fabric interconnect
B. Remove the service pack from the subordinate fabric interconnect
C. Clear the startup version of the default infrastructure pack
D. Upgrade the firmware of the infrastructure firmware by using the force option
View answer
Correct Answer: B
Question #4
After upgrading a client’s fabric interconnect to the latest version, an engineer discovers that the appliance has lost its entire configuration. Which two locations should an engineer check to confirm that the appliance had backed up the configuration prior to the upgrade in order to retrieve the lost configuration? (Choose two.)
A. Equipment FSM page, InternalBackup stage
B. Service profiles page, InternalBackup stage
C. Admin page, PollInternalBackup stage
D. Equipment FSM page, PollInternalBackup stage
E. Admin page, InternalBackup stage
View answer
Correct Answer: A
Question #5
A request to activate the port security database is rejected. Which action do you perform to investigate the cause of the issue?
A. Enable the auto-learning feature
B. Use the force option to identify rejected devices
C. Find conflicting entries between the active and configuration databases
D. Verify that devices are fully attached to the active database
View answer
Correct Answer: D
Question #6
The EEM script overrides all events in the system policy. What should be added to the script to resolve the issue?
A. event statement
B. environment variable
C. event-default action statement
D. configure terminal action
View answer
Correct Answer: D
Question #7
One of Cisco Nexus Series interfaces has become errdisabled with the error message “DCX-No ACK in 100 PDUs”. What is the cause of this error?
A. The host has not responded to the Control Sub-TLV DCBX exchanges of the switch
B. The acknowledgement number in the server response has not incremented for 100 exchanges
C. Cisco Discovery Protocol is disabled on the switch
D. LLDP is disabled on the switch
View answer
Correct Answer: D
Question #8
A fabric interconnect fails to start and the console displays the loader prompt. Which two actions resolve the issue? (Choose two.)
A. Load an uncorrupt bootloader image
B. Load an uncorrupt kickstart image
C. Reconnect L1/L2 cables between the Fis
D. Reformat the fabric interconnect
E. Load the correct version of the boot image
View answer
Correct Answer: B
Question #9
The EEM script fails to send an SNMP trap when a user attempts to enter configuration mode. Which configuration is missing from the script?
A. event statement
B. event-default action statement
C. policy-default action statement
D. IP address of the SNMP server
View answer
Correct Answer: B
Question #10
Partial configuration from N9K-1 and N9K-2 is included. The client has two WANs connected. WAN-1 is for normal business-day activities. WAN-2 is for server backups during nonworking hours of 1:00 a.m. to 5:00 a.m. daily. The client says that at the scheduled time for backup, the data center server failed to use the WAN-2 link to back up the servers to the cloud backup system. What is the solution to this problem?
A. The event timer must be written in epoch time format
B. The Cisco Nexus switch must be configured with one applet because a configuration with two applets will fail
C. The Cron entry must be configured without double quotes
D. The applet called “Backup” must include an action to remove the current static route
View answer
Correct Answer: D
Question #11
An engineer is troubleshooting an upgrade failure on a switch. Which action resolves the issue?
A. Save the system image in NVRAM
B. Use the same system image as the kickstart image
C. Load a new system image
D. Reload the same system image
View answer
Correct Answer: A
Question #12
A network engineer configures an EEM script to get a syslog notification after a configuration change. This message appears when the engineer must make a new configuration to this switch. Which configuration did the engineer neglect to apply in the script for it to function properly?
A. event cli match ‘configure terminal’
B. event policy-default count 1 time 100
C. event syslog occurs 10
D. action 2
View answer
Correct Answer: BE
Question #13
The initiator that has FC ID 0x970102 fails to communicate with the target that has FC ID 0x970200. What action resolves the issue?
A. Reconfigure the initiator and the target to be in the same zones
B. Reactivate the zoneset
C. Reset the port for FC ID 0x970102 and FC ID 0x970200 to log in to the fabric
D. Reset the port for FC ID 0x970209 and FC ID 0x9700c2 to log in to the fabric
View answer
Correct Answer: B
Question #14
A server administrator attempts to change the Cisco IMC KVM certificate to one signed by a private CA, but the certificate is not being accepted. What can cause this process to fail?
A. using a certificate with a password-protected private key
B. RSA encryption being used in the generation of the certificate
C. AES encryption being used in the generation of the certificate
D. public IP addres of the Cisco IMC not being included in the SAN
View answer
Correct Answer: C
Question #15
Your client reports that many flaps and server cluster disconnects occur in their data center. While troubleshooting the issue, you discover a network attack hitting their Cisco Nexus 7000 Series Switches and determine that the source IP addresses are spoofed. Which first-line security solution resolves this issue?
A. Dynamic ARP Inspection
B. Unicast RPF
C. IP Source Guard
D. Storm Control
View answer
Correct Answer: C
Question #16
An engineer is investigating a role mapping issue on a switch. The users report that they cannot view the IP addresses under the tenant “corp”. Which action resolves the issue?
A. Add the users to the RADIUS server
B. Update the UNIX ID
C. Configure the correct secret password between the APIC and the RADIUS server
D. Add the updated avpair to include/corp/admin/
View answer
Correct Answer: D
Question #17
A network administrator attempts to install an application in the Cisco NX-OS Guest shell and receives an error that there is not enough space on the disk. Which command must the administrator run to increase the disk space available in the Guest shell?
A. guestshell growdisk rootfs [size-in-MB]
B. guestshell pvextend rootfs [size-in-MB]
C. guestshell resize rootfs [size-in-MB]
D. guestshell resize2fs rootfs [size-in-MB]
View answer
Correct Answer: A

View Answers after Submission

Please submit your email and WhatsApp to get the answers of questions.

Note: Please make sure your email ID and Whatsapp are valid so that you can get the correct exam results.

Email:
Whatsapp/phone number:


Copyright © 2024. Designer by SPOTO Official Website. All Rights Reserved.