DON'T WANT TO MISS A THING?

Certification Exam Passing Tips

Latest exam news and discount info

Curated and up-to-date by our experts

Yes, send me the newsletter

Success Secrets: Microsoft MS-200 Exam Questions & Mock Tests, Microsoft 365 Certified | SPOTO

Welcome to "Success Secrets: Microsoft MS-200 Exam Questions & Mock Tests, Microsoft 365 Certified | SPOTO," your ultimate companion in mastering the MS-200 exam. Unveil the secrets to success with our meticulously crafted practice tests, sample questions, and mock exams designed to elevate your exam preparation to new heights. Explore our comprehensive range of exam materials, including free test resources and online exam questions, meticulously curated to equip you with the skills needed to excel in the MS-200 certification. With our detailed exam dumps and comprehensive exam questions and answers, you'll be fully prepared to navigate the complexities of the exam with confidence. Stay ahead of the curve with our latest practice tests, continuously updated to reflect the most recent exam trends. Embark on your journey to becoming Microsoft 365 Certified with SPOTO's unparalleled exam preparation resources.

Take other online exams
Question #1
Which of the following characteristics are NOT shared by RIPv1 and RIPv2?
A. They share an administrative distance value
B. They use the same metric
C. They both send the subnet mask in routing updates
D. They have the same maximum hop count
View answer
Correct Answer: C

View The Updated MS-200 Exam Questions

SPOTO Provides 100% Real MS-200 Exam Questions for You to Pass Your MS-200 Exam!

Get MS-200 Practice Test
Question #2
The conference room has a switch port available for use by the presenter during classes. Each presenter uses the same PC attached to the port. You would like to prevent any other PCs from using that port. You have completely removed the former configuration in order to start anew. Which of the following steps are required to prevent any other PCs from using that port?
A. make the port a trunk port
B. enable port security
C. make the port an access port
D. assign the MAC address of the PC to the port
E. make the port a sticky port
F. set the maximum number of MAC addresses on the port to 1
View answer
Correct Answer: BCD
Question #3
Examine the following partial output of the show interfaces command. Which of the following statements are true? (Choose all that apply.)
A. the interface is functional
B. the largest frame allowed through this connection is 1500 bytes
C. the interface needs the no shutdown command executed to be functional
D. the largest frame allowed through this connection is 10000 Kbs
View answer
Correct Answer: BC
Question #4
Which is the shortest possible notation of the following Internet Protocol version 6 (IPv6) address? 2001:0DB8:0000:0001:0000:0000:0000:F00D
A. 2001:DB8::1::F00D
B. 2001:DB8:0:1::F00D
C. 2001:DB8:0:1:0:0:0:F00D
D. 2001:0DB8:0:1::F00D
View answer
Correct Answer: B
Question #5
Which of the following is the correct command to define a default route using a gateway address of 172.16.0.254?
A. ip default-route 172
B. ip route 0
C. default-gateway 172
D. ip route default 172
View answer
Correct Answer: B
Question #6
Which statement is TRUE of the CSMA/CD Ethernet media access method?
A. It requires centralized monitoring and control
B. It is ideal for a switched network environment
C. It uses a back-off algorithm to calculate a random time value
D. Each station is allotted a time slot in which they can transmit data
View answer
Correct Answer: C
Question #7
Which technique is used to stop routing loops by preventing route update information from being sent back over the interface on which it arrived?
A. Holddown timer
B. Triggered updates
C. Route poisoning
D. Split horizon
E. Maximum hop count
View answer
Correct Answer: D
Question #8
View the following network diagram: Which switch will become the root bridge?
A. SwitchA
B. SwitchB
C. SwitchC
D. The root bridge cannot be determined from the given information
View answer
Correct Answer: A
Question #9
Which device in the given network diagram has as its primary responsibility the regulation of network traffic flow based on different trust levels for different computer networks?
A. the router
B. the switch
C. the hub(s)
D. the firewall
View answer
Correct Answer: D
Question #10
You are configuring Open Shortest Path First (OSPF) protocol for IPv6 on Router5. The router has two interfaces, which have been configured as follows: S0/0 - 192.168.5.1/24 S0/1 - 10.0.0.6/8 You would like OSPF to route for IPv6 only on the S0/0 network. It should not route for IPv6 on the S0/1 network. The process ID you have chosen to use is 25. You do not want to apply an IPv6 address yet. Which of the following command sets would enable OSPF for IPv6 as required?
A. Router5(config)#ipv6 ospf 25Router5(config)# network 192
B. Router5(config)#ipv6 ospf 25Router5(config)#router-id 192
C. Router5(config)#ipv6 unicast-routing Router5(config)#ipv6 router ospf 25 Router5(config-rtr)#router-id 1
D. Router5(config)#ipv6 unicast-routing Router5(config)#ipv6 ospf 25 Router5(config-rtr)#router-id 1
View answer
Correct Answer: C
Question #11
Examine the network diagram. Which switch port(s) will be in a forwarding state? (Choose two.)
A. SwitchA - Fa0/1 and Fa0/2
B. SwitchA - Fa0/1
C. SwitchA - Fa0/2
D. SwitchB - Fa0/1
E. SwitchB - Fa0/2
View answer
Correct Answer: AD
Question #12
What data structure is pictured in the graphic?
A. TCP segment
B. UDP datagram
C. IP header
D. Http header
View answer
Correct Answer: B
Question #13
Which Enhanced Interior Gateway Routing Protocol (EIGRP) packet is NOT sent reliably over the network?
A. Update
B. Query
C. Reply
D. Acknowledgement
View answer
Correct Answer: D
Question #14
Which Cisco IOS command enables a router to copy IOS images to a router?
A. copy tftp flash
B. copy flash tftp
C. copy running-config tftp
D. copy running-config startup-config
E. copy tftp running-config
View answer
Correct Answer: A
Question #15
Which option lists the given applications in the correct sequence of increasing bandwidth consumption?
A. an interactive Telnet session on a server running an SAP application a voice conversation between PC-based VoIP services a voice conversation between two IP phones while accessing an online video site
B. a voice conversation between two IP phones while accessing an online video site an interactive Telnet session on a server running an SAP application a voice conversation between PC-based VoIP services
C. a voice conversation between PC-based VoIP services a voice conversation between two IP phones while accessing an online video site an interactive Telnet session on a server running an SAP application
D. an interactive Telnet session on a server running an SAP application a voice conversation between two IP phones while accessing an online video site a voice conversation between PC-based VoIP services
View answer
Correct Answer: A
Question #16
Which Cisco Internetwork Operating System (IOS) command would be used to define a static route for network 192.168.11.0 through default gateway 192.168.43.1?
A. router(config)# ip route 192
B. router# ip route 192
C. router(config)# ip classless 192
D. router(config)# ip default gateway 192
E. router# ip default gateway 192
View answer
Correct Answer: A
Question #17
Which of the following statements are true of Class C IP addresses?
A. The decimal values of the first octet can range from 192 to 223
B. The decimal values of the first octet can range from 1 to 126
C. The first octet represents the entire network portion of the address
D. The first three octets represent the entire network portion of the address
E. The value of the first binary place in the first octet must be 0
F. The value of the first two binary places in the first octet must be 11
View answer
Correct Answer: ADF
Question #18
How many IP addresses can be assigned to hosts in subnet 192.168.12.64/26?
A. 32
B. 62
C. 128
D. 256
View answer
Correct Answer: B
Question #19
Which two are NOT valid Cisco IOS commands used for Cisco Discovery Protocol (CDP)? (Choose two.)
A. show cdp
B. show cdp entry *
C. show cdp neighbor entries
D. show cdp neighbors detail
E. show cdp devices
View answer
Correct Answer: CE
Question #20
What command would provide the output displayed in the exhibit? (Click on the Exhibit(s) button.)
A. switch# show hsrp
B. switch# show standby
C. switch# show interface vlan
D. switch# show standby brief
View answer
Correct Answer: D
Question #21
The following exhibit displays the MAC address table of a switch in your network, along with the location of each device connected to the switch: Which of the following frames will be flooded to all ports after it is received by the switch?
A. source MAC: 12-34-56-78-9A-BD, destination MAC: 12-34-56-78-9A-BF
B. source MAC: 12-34-56-78-9A-BF, destination MAC: 12-34-56-78-9A-BD
C. source MAC: 12-34-56-78-9A-BF, destination MAC: 12-34-56-78-9A-BC
D. source MAC: 12-34-56-78-9A-BC, destination MAC: 12-34-56-78-9A-BF
View answer
Correct Answer: C
Question #22
Which Cisco Internetwork Operating System (IOS) command is used to make the running configuration in Random Access Memory (RAM) to the configuration the router will use at startup?
A. copy running-config startup-config
B. copy flash running-config
C. copy tftp flash
D. copy running-config flash memory
E. copy startup-config tftp
F. copy tftp running-config
G. copy running-config tftp
View answer
Correct Answer: A
Question #23
In the following partial output of the show ip route command, what does the letter D stand for? D 192.1.2.0/24 via 5.1.1.71 [w:0 m:0] C 192.8.1.1/32 directly connected to loopback 0
A. This is a default route
B. This is an EIGRP route
C. This is static route
D. This is a directly connected route
View answer
Correct Answer: B
Question #24
Which Cisco Internetwork Operating System (IOS) command is used to save the running configuration to non-volatile random access memory (NVRAM)?
A. copy startup-config running-config
B. move startup-config running-config
C. copy running-config startup-config
D. move startup-config running-config
View answer
Correct Answer: C
Question #25
Which of the following excerpts from the output of the show ip eigrp topology command include EIGRP learned routes or pairs of routes that will be included in the routing table? (For excerpts that include multiple routes, do not include the entry unless BOTH routes will be included in the routing table.)
A. P 172
B. P 172
C. P 172
D. P 172
View answer
Correct Answer: C
Question #26
When executed on a HSRP group member named Router 10, what effect does the following command have? Router10(config-if)# standby group 1 track serial0 25
A. It will cause the router to increase its HSRP priority by 25 if the Serial0 interface on the standby router goes down
B. It will cause the router to shut down the Serial0 interface if 25 packets have been dropped
C. It will cause the router to notify Router 25 is serial 0 goes down
D. It will cause the router to decrement its HSRP priority by 25 if Serial 0 goes down
View answer
Correct Answer: D
Question #27
Which two are the limitations of the service password-encryption command? (Choose two.)
A. It uses the MD5 algorithm for password hashing
B. It uses the Vigenere cipher algorithm
C. An observer cannot read the password when looking at the administrator's screen
D. The algorithm used by this command cannot protect the configuration files against detailed analysis by attackers
View answer
Correct Answer: BD
Question #28
Refer to the partial output of the show interfaces command: What does the Serial 0 is administratively down, line protocol is down line indicate with certainty?
A. There is no problem with the physical connectivity
B. There is a configuration problem in the local or remote router
C. There is a problem at the telephone company's end
D. The shutdown interface command is present in the router configuration
View answer
Correct Answer: D
Question #29
Which of the following commands will enable a global IPv6 address based on the Modified EUI-64 format interface ID?
A. ipv6 address 5000::2222:1/64
B. ipv6 address autoconfig
C. ipv6 address 2001:db8:2222:7272::72/64 link-local
D. ipv6 enable
View answer
Correct Answer: B
Question #30
Which of the following is NOT a benefit of cloud computing to cloud users?
A. On-demand self-service resources provisioning
B. Centralized appearance of resources
C. Highly available, horizontally scaled applications
D. Cost reduction from standardization and automation
View answer
Correct Answer: D
Question #31
When the auth keyword is used in the snmp-server host command, which of the following must be configured with an authentication mechanism?
A. the interface
B. the host
C. the user
D. the group
View answer
Correct Answer: C
Question #32
Which command would be used to establish static translation between an inside local address 192.168.144.25 and an inside global address 202.56.63.102?
A. router(config)#ip nat inside source static 192
B. router(config)#ip source nat inside static local-ip 192
C. router(config)#ip nat static inside source 192
D. router(config)#ip nat inside static source 192
View answer
Correct Answer: A
Question #33
Which command will save a dynamically learned MAC address in the running-configuration of a Cisco switch?
A. switchport port-security mac-address
B. switchport port-security
C. switchport port-security sticky mac-address
D. switchport port-security mac-address sticky
E. switchport mac-address sticky
View answer
Correct Answer: D
Question #34
Multiple routes to a destination already exist from various routing protocols. Which of the following values is used FIRST to select the route that is inserted into the route table?
A. composite metric
B. administrative distance
C. prefix length
D. hop count
View answer
Correct Answer: B
Question #35
Which command is used to view the entire routing table?
A. show route-map
B. show ip mroute
C. show ip route
D. show ip protocols
View answer
Correct Answer: C
Question #36
Which Cisco IOS command disables Cisco Discovery Protocol Version 2 (CDPv2) advertisements?
A. no cdp advertise-v2
B. no cdp v2-advertise
C. no cdp run
D. no cdp enable
View answer
Correct Answer: A
Question #37
Which of the following fields are in a Transmission Control Protocol (TCP) header? (Choose three.)
A. Length
B. Sequence Number
C. Data Offset
D. Type-of-Service
E. Window
View answer
Correct Answer: BCE
Question #38
Which of the following is NOT a possible component of Enhanced Interior Gateway Routing Protocol's (EIGRP) composite metric?
A. Cost
B. Load
C. Delay
D. Bandwidth
View answer
Correct Answer: A
Question #39
What is the significance of the following BECN packet statistics?
A. The router is experiencing congestion in sending frames
B. The router is experiencing congestion in receiving frames
C. The Frame Relay mapping table is missing an entry
D. The Frame Relay mapping table is corrupt
View answer
Correct Answer: A
Question #40
Which command will display the Virtual LAN (VLAN) frame tagging method for a switch link?
A. show vlan
B. show vlan encapsulation
C. show vtp status
D. show interfaces trunk
View answer
Correct Answer: D

View The Updated Microsoft Exam Questions

SPOTO Provides 100% Real Microsoft Exam Questions for You to Pass Your Microsoft Exam!

Get Microsoft Practice Test

View Answers after Submission

Please submit your email and WhatsApp to get the answers of questions.

Note: Please make sure your email ID and Whatsapp are valid so that you can get the correct exam results.

Email:
Whatsapp/phone number:


Copyright © 2024. Designer by SPOTO Official Website. All Rights Reserved.