Success Secrets: CCNP 350-601 Exam Questions & Mock Tests, Cisco Data Center 350-601 DCCOR

Question #1

An engineer must build a lab replica of a Cisco UCS production environment. The file must be imported into a new Cisco UCS cluster using a Cisco UCS Manager GUI. The file must be in XML format and be exported from Cisco UCS Manager using encrypted method. Which two configuration parameters should be selected to meet these requirements? (Choose two.) A.Type: Full state B.Type: Logical configuration C.Protocol: TFTP D.Type: All configuration E.Protocol: SCP

An engineer must build a lab replica of a Cisco UCS production environment. The file must be imported into a new Cisco UCS cluster using a Cisco UCS Manager GUI

View answer

Correct Answer: B

Question #2

An engineer creates a service profile in Cisco UCS Manager and must assign a policy that reboots blades when changes are applied. The changes must be applied only after user acknowledgment. Which two policies must be configured to meet these requirements? (Choose two.)

A. Reboot Policy B

E. Maintenance Policy

View answer

Correct Answer: A

Question #3

A network engineer needs to upgrade the EPLDs of the fabric modules for a Cisco MDS director-class switch. In which order are components reloaded during the process?

A. one fabric module at the time

B. all fabric modules followed by the entire switching platform C

View answer

Correct Answer: AE

Question #4

Which data structure results from running this Python code?

A. tuple

B. dictionary C

View answer

Correct Answer: DE

Question #5

An engineer requires a solution to automate the configuration and deployment of remote network for a customer. The engineer must keep these considerations in mind: The customer's environment is based on industry-accepted standards and requires a solution that meets these standards. The security requirements mandate the use of a secure transport mechanism between the automation software and target devices such as SSH or TLS. The solution must be based on a human-readable and easy to parse format such as XML

An engineer requires a solution to automate the configuration and deployment of remote network for a customer. The engineer must keep these considerations in mind: The customer's environment is based on industry-accepted standards and requires a solution that meets these standards

View answer

Correct Answer: A

Question #6

Which solution provides remote and direct file-level access to users and systems?

A. direct-attached storage

B. Fibre Channel over Ethernet C

View answer

Correct Answer: A

Question #7

A customer wants to offload some of its order processing to a public cloud environment. The customer environment is based on Cisco ACI and uses Puppet with containerized applications. The operations team requires a solution to orchestrate and optimize the cost of the new solution. Which product must be used to meet these requirements?

A. Cisco Workload Optimization Manager

B. Cisco CloudCenter C

View answer

Correct Answer: S

Question #8

A network engineer plans to upgrade the firmware of a Cisco UCS B-Series chassis by using the Auto Install feature. Which component is upgraded during the infrastructure firmware upgrade stage?

A. Adapter B

View answer

Correct Answer: BE

Question #9

An engineer needs to perform a backup of user roles and locales from Cisco UCS Manager to replicate the setting to a different fabric interconnect. The engineer wants to review the file before importing it to a target fabric interconnect. Which backup type must be selected to meet these requirements?

A. logical configuration B

View answer

Correct Answer: B

Question #10

An engineer needs to make an XML backup of Cisco UCS Manager. The backup should be transferred using an authenticated and encrypted tunnel, and it should contain all system and service profiles configuration. Which command must be implemented to meet these requirements?

A. copy running-config scp://user@host35/backups/all-config9

B. create backup scp://user@host35/backups/all-config9

View answer

Correct Answer: B

Question #11

A network architect considers a Cisco HyperFlex design solution for a company. The proposed solution is for a virtual environment that is not performance-sensitive, but the solution must have high storage capacity and a low cost. Which Cisco HyperFlex storage configuration should be used? A.Hybrid B.All-SAN C.All-NVMe D.All-Flash

A network architect considers a Cisco HyperFlex design solution for a company. The proposed solution is for a virtual environment that is not performance-sensitive, but the solution must have high storage capacity and a low cost

View answer

Correct Answer: B

Question #12

What is a characteristic of EPLD updates on Cisco MDS 9000 Series Switches?

A. EPLD bundles are released separately from a Cisco MDS NX-OS release

B. EPLD packages update hardware functionality on a device C

View answer

Correct Answer: C

Question #13

A Cisco UCS user called "Employee1" accidentally changed the boot policy of the Cisco UCS server at the Cisco UCS Manager root level. This change impacted all service profiles, and their storage connectivity was lost. The system administrator wants to prevent this issue from recurring in the future. The new security policy mandates that access must be restricted up to the organization level and prevent other users from modifying root policies. Which action must be taken to meet these requirements?

A. Modify the privilege level assigned to the user

B. Assign users to a specific Cisco UCS locale C

View answer

Correct Answer: AB

Question #14

Which storage protocol reduces file locks by using leasing? A.SMB B.NFS 3 C.NFS 4 D.CIFS

Which storage protocol reduces file locks by using leasing? A. MB B

View answer

Correct Answer: A

Question #15

A network engineer needs to configure system logging on the MDS switch. The messages must be displayed with the severity level of "warning" and above. For security reasons, the users must be logged out of the console after 5 minutes of inactivity. Which configuration must be applied to meet these requirements?

A. MDS-A(config)# logging console 5 MDS-A(config-console)# exec-timeout 300

B. MDS-A(config)# line console MDS-A(config-console)# speed 38400 MDS-A(config-console)# exec-timeout 5 MDS-A(config)# logging console 4 C

View answer

Correct Answer: A

Question #16

An engineer must configure multiple EPGs on a single access port in a large Cisco ACI fabric without using VMM integration. The relevant access policies and tenant policies have been created. A single AAEP is used to configure the access ports in the fabric. Which two additional steps must be taken to complete the configuration? (Choose two.)

A. The EPGs must link directly to the corresponding AAEP

B. A contract must be defined between the EPGs C

E. The EPGs must be linked to the correct physical domain

View answer

Correct Answer: D

Question #17

Several production and development database servers exist in the same EPG and IP subnet. The IT security policy is to prevent connections between production and development. Which attribute must be used to assign the servers to different microsegments?

A. data center B

View answer

Correct Answer: AE

Question #18

An engineer is implementing Cisco Intersight in a secure environment. The environment must use LDAP directory service and ensure information integrity and confidentiality. Which two steps must be taken to implement the solution? (Choose two.)

A. Enable Certificate Signing Request in Cisco Intersight

B. Add a trusted root LDAP certificate to Cisco Intersight C

E. Add a trusted OAuth token to Cisco Intersight

View answer

Correct Answer: B

Question #19

Due to a domain name change at a customer site, a Cisco UCS cluster must be renamed. An engineer must recommend a solution to ensure that the Cisco UCS Manager is available over HTTPS. Which action accomplishes this goal?

A. Regenerate the default key ring certificate manually

B. Reinstall the cluster to generate the default key ring certificate C

View answer

Correct Answer: D

Question #20

A new employee must be granted access to add VLANs into an existing Cisco UCS Manager and configure NTP synchronization with date and time zone settings. Which two privileges must be granted to the employee to complete the task? (Choose two.)

A. Service Profile Compute (ls-compute) B

View answer

Correct Answer: A

Question #21

A network engineer must perform a backup and restore of the Cisco Nexus 5000 Series Switch configuration. The backup must be made to an external backup server. The only protocol permitted between the Cisco Nexus switch and the backup server is UDP. The backup must be used when the current working configuration of the switch gets corrupted. Which set of steps must be taken to meet these requirements?

A. 1

B. 1

View answer

Correct Answer: D

Question #22

An engineer must distribute all the host ports to use all eight configured FEX uplinks. The solution must minimize disruption if an uplink fails. Which action accomplishes this objective?

A. Set the pinning max-links value to 8

B. Configure the eight uplinks in a port channel C

View answer

Correct Answer: C

Question #23

What is the result of executing this Python code?

A. It sends the switch configuration to Cisco TAC

B. It sends a Cisco device backup to a remote destination C

View answer

Correct Answer: C

Question #24

Which command is run from the Guest Shell to set the description on the first five interfaces of the Cisco Nexus switch?

A. [guestshell@guestshell ~]$ for x in {1

B. [guestshell@guestshell ~]$ for x in {1

View answer

Correct Answer: AC

Question #25

An engineer must start a software upgrade on a Cisco Nexus 5000 Series Switch during a zone merge. What is the result of this action?

A. The upgrade stops

B. The zone merge pauses until the upgrade completes C

View answer

Correct Answer: C

Question #26

A network engineer requires remote access via SSH to a Cisco MDS 9000 Series Switch. The solution must support secure access using the local user database when the RADIUS servers are unreachable from the switches. Which command meets these requirements?

A. aaa authentication none

B. aaa authentication login default group radius C

View answer

Correct Answer: A

Question #27

An environment consists of a Cisco MDS 9000 Series Switch that uses port channels. An engineer must ensure that frames between the source and the destination follow the same links for a specific flow. Subsequent flows are allowed to use a different link. Which load balancing method should be used to accomplish this goal? A.src-id/dst-id B.src-dst-oui C.src-dst-port D.src-id/dst-id/oxid

An environment consists of a Cisco MDS 9000 Series Switch that uses port channels. An engineer must ensure that frames between the source and the destination follow the same links for a specific flow

View answer

Correct Answer: B

Question #28

Which data interchange format is presented in this output? A.CSS B.YAML C.XML D.JSON

Which data interchange format is presented in this output? A. SS B

View answer

Correct Answer: B

DON'T WANT TO MISS A THING?

100% Pass Cisco, PMP, CISA, CISM, AWS Practice test on SALE!
Get Now

Success Secrets: CCNP 350-601 Exam Questions & Mock Tests, Cisco Data Center 350-601 DCCOR | SPOTO

View Answers after Submission

DON'T WANT TO MISS A THING?

100% Pass Cisco, PMP, CISA, CISM, AWS Practice test on SALE! Get Now

Success Secrets: CCNP 350-601 Exam Questions & Mock Tests, Cisco Data Center 350-601 DCCOR | SPOTO

View Answers after Submission

100% Pass Cisco, PMP, CISA, CISM, AWS Practice test on SALE!
Get Now