DON'T WANT TO MISS A THING?

Certification Exam Passing Tips

Latest exam news and discount info

Curated and up-to-date by our experts

Yes, send me the newsletter

Prepare for CCNP 300-815 Exams Questions & Study Materials, Cisco Collaboration 300-815 CLACCM | SPOTO

Prepare comprehensively for the CCNP 300-815 Certification Exam in Cisco Collaboration (CLACCM 300-815) with SPOTO's exam questions and study materials. This 90-minute exam, crucial for CCNP Collaboration Certification, evaluates your understanding of advanced call control and mobility services. Key areas include signaling and media protocols, CME/SRST gateway technologies, Cisco Unified Board Element, call control and dial planning, Cisco Unified CM Call Control, and mobility solutions. The course 'Implementing Cisco Advanced Call Control and Mobility Services' is a vital resource for exam preparation, offering in-depth coverage of exam topics and strategies. Access our practice tests, exam dumps, and exam simulators to enhance your readiness and excel in demonstrating your proficiency in advanced call control and mobility services during the CCNP 300-815 exam.
Take other online exams
Question #1
A user reports that when they attempt to log out from the Cisco Extension Mobility service by pressing the Services button, they cannot log out. What is the most likely cause of this issue?
A. The Cisco Extension Mobility service has not been configured on the phone
B. There might be a significant delay between the button being pressed and the Cisco Extension Mobility service recognizing it
C. The user device profile has not been assigned to the user
D. The user device profile is not subscribed to the Cisco Extension Mobility service
View answer
Correct Answer: CE

View The Updated 300-815 Exam Questions

SPOTO Provides 100% Real 300-815 Exam Questions for You to Pass Your 300-815 Exam!

Get 300-815 Practice Test
Question #2
Configure Call Queuing in Cisco Unified Communications Manager. Where do you set the maximum number of callers in the queue?
A. in the telephony service configuration
B. in the queuing configuration
C. in Cisco Unified CM Enterprise Parameters
D. in Cisco Unified CM Service Parameters
View answer
Correct Answer: C
Question #3
Where on Cisco Unified Communications Manager do you configure the standard local route group for a group of devices?
A. System > Location Info
B. Call Routing > Route/Hunt > Local Route Group Names
C. System > Device Pool
D. Call Routing > Emergency Location > Emergency Location (ELIN) Groups
View answer
Correct Answer: AB
Question #4
An administrator is troubleshooting a situation where a call placed from a phone registered to Cisco Unified Communications Manager does not complete. The administrator wants to use the Dialed Number Analyzer on Cisco Unified CM to check which translation pattern the call is matching. However, when logging in to Cisco Unified Serviceability there is no option for Dialed Number Analyzer under the tool menu. Which two steps must be performed to resolve this issue? (Choose two.)
A. Restart the subscriber
B. Activate the Cisco Extended Functions service
C. Activate the Cisco CallManager service
D. Activate the Cisco Dialed Number Analyzer service
E. Activate the Cisco Dialed Number Analyzer Server service
View answer
Correct Answer: B
Question #5
Which services are needed to successfully implement Cisco Extension Mobility in a standalone Cisco Unified Communications Manager server?
A. Cisco Extended Functions, Cisco Extension Mobility, and Cisco AXL Web Service
B. Cisco CallManager, Cisco TFTP, and Cisco CallManager SNMP Service
C. Cisco CallManager, Cisco TFTP, and Cisco Extension Mobility
D. Cisco TAPS Service, Cisco TFTP, and Cisco Extension Mobility
View answer
Correct Answer: A
Question #6
Which configuration element of a hunt group allows for changing Calling Party Transformations settings?
A. line group
B. hunt pilot
C. route group
D. hunt list
View answer
Correct Answer: CD
Question #7
An engineer is configuring a call park feature in Cisco Unified Communications Manager Express. Which command does the engineer use to ensure that the call is reverted to the user after 60 seconds?
A. R2(config-ephone-dn)#park reservation-group 60
B. R2(config-ephone-dn)#park-slot timeout 60 limit 2 recall alternate 3002
C. R2(config-ephone-dn)#park reservation-group 1
D. R2(config-ephone-dn)#park-slot timeout 30 limit 2 recall alternate 3002
View answer
Correct Answer: A
Question #8
When configuring hunt groups, where do you add the individual directory numbers that will be part of the group?
A. route group
B. line group
C. hunt list
D. hunt pilot
View answer
Correct Answer: A
Question #9
Users report that when they dial the emergency number 9911 from any internal phone, it takes a long time to connect with the emergency operator. Which action resolves this issue?
A. Adjust the service parameter T302 timet to the desired value
B. Adjust the service parameter T204 timer to the desired value
C. Check the Urgent Priority check box under 9
D. Point the emergency pattern directly to the PSTN gateway
View answer
Correct Answer: AB
Question #10
Which two configuration parameters are prerequisites to set Native Call Queuing on Cisco Unified Communications Manager? (Choose two.)
A. Cisco IP Voice Media Streaming Service must be activated on at least one node in the cluster
B. A unicast music on hold audio source must be configured
C. Cisco RIS data collector service must be running on the same server as the Cisco CallManager service
D. The maximum number of callers allowed in queue must be 10
E. The phone button template must have the Queue Status Softkey configured
View answer
Correct Answer: B
Question #11
Which two types of authentication are supported for the configuration of Intercluster Lookup Service? (Choose two.)
A. TokenID
B. username and secret key
C. TLS certificates
D. passwords
E. FQDN of the servers defined in DNS
View answer
Correct Answer: C
Question #12
A user reports when they press the services key they do not receive a user ID and password prompt to assign the phone extension. Which action resolves the issue?
A. Create the default device profiles for all phone models that are used
B. Subscribe the phone to the Cisco Extension Mobility service
C. Create the end user and associate it to the device profile
D. Assign the extension as a mobile extension
View answer
Correct Answer: DE
Question #13
An administrator is configuring a cluster for ILS and wants to limit the amount of entities that Cisco Unified Communications Manager can write to the database for data that is learned through ILS. Which service parameter is used to adjust this limit?
A. ILS Max Number of Learned Objects in Database
B. ILS Active Learned Object Upper Limit
C. Global Data Service Parameter Limit
D. Imported Dial Plan Replication Database Object Lower Limit
View answer
Correct Answer: D
Question #14
An engineer configures Cisco Unified Border Element to connect the enterprise VoIP network with a SIP telephony provider. Calls are not working in either direction. What must be configured in the dial peer 1 to fix the issue?
A. answer-address 555 ……
B. codec g729
C. session-protocol sipv2
D. incoming called number 555……
View answer
Correct Answer: B
Question #15
The Cisco Unified Communications Manager Dialed Number Analyzer allows analysis of calls from which two devices? (Choose two.)
A. translation patterns
B. device pools
C. CTI ports
D. CTI route points
E. IP phones
View answer
Correct Answer: B
Question #16
How many maximum hops can an ILS updarte traverse?
A. 3
B. 6
C. 9
D. 12
View answer
Correct Answer: BD
Question #17
What is the relationship between partition, time schedule, and time period in Time-of-Day routing in Cisco Unified Communications Manager?
A. A partition can have multiple time schedules assigned
B. A partition can have one time schedule assigned
C. A partition can have multiple time schedules assigned
D. A partition can have one time schedule assigned
View answer
Correct Answer: A
Question #18
Within the North American Numbering Plan, gateways located in Ottawa, Canada and marked as “YOW” are assigned to the Calling Party Transformation CSS NANP_CgPTP, which contains partition NANP_calling_xforms. What is the calling-party number and the numbering type if the calling user +1613-555-1234 dials the number?
A. calling number 613-555-1234 and numbering type “subscriber”
B. calling number 011-1-613-555-1234 and numbering type “subscriber”
C. calling number 011613-555-1234 and numbering type “international”
D. calling number 613-555-1234 and numbering type “national”
View answer
Correct Answer: BE

View Answers after Submission

Please submit your email and WhatsApp to get the answers of questions.

Note: Please make sure your email ID and Whatsapp are valid so that you can get the correct exam results.

Email:
Whatsapp/phone number:


Copyright © 2024. Designer by SPOTO Official Website. All Rights Reserved.