DON'T WANT TO MISS A THING?

Certification Exam Passing Tips

Latest exam news and discount info

Curated and up-to-date by our experts

Yes, send me the newsletter

Prepare for CCNP 300-510 Exams Questions & Study Materials, Cisco Service Provider 300-510 SPRI | SPOTO

Prepare thoroughly for the CCNP 300-510 exams with our comprehensive study materials and exam questions. The Implementing Cisco Service Provider Advanced Routing Solutions v1.0 (SPRI 300-510) exam, an integral part of the CCNP Service Provider Certification, assesses candidates' understanding of implementing advanced routing technologies, covering routing protocols, policy language, MPLS, and segment routing. Our exam resources include sample questions, mock exams, and exam dumps, providing an immersive exam practice environment. Access our free test to evaluate your readiness and identify areas for improvement. Utilize our detailed exam answers and explanations to reinforce understanding and boost confidence. Trust SPOTO for reliable exam preparation, including online exam questions and exam simulators, ensuring success in the CCNP 300-510 exams and advancement in service provider networking careers.
Take other online exams
Question #1
What is the function of BGP confederations?
A. hey require routers to use private AS numbers
B. hey eliminate the need for a fully-meshed internal BGP design
C. hey enable a single device to distribute a common configuration to its peers
D. hey assign an external BGP router to serve as the route reflector
View answer
Correct Answer: B
Question #2
Refer to the exhibit. What is the relationship between Router 1 and Router 2?
A. Router 1 centrally learns the topology of the network to aid in SR-TE path selection, and Router 2 is a node that feeds Router 1 topology information
B. Router 1 and Router 2 are participating in SR-TE tunnels and are both head-end routers
C. Router 1 and Router 2 centrally learn the topology of the network to aid in SR-TE path selection for peers
D. Router 2 is the head-end router in an SR-TE tunnel, and it is learning topology of the network from the PCE enabled on Router 1
View answer
Correct Answer: D
Question #3
After you applied these configurations to routers R1 and R2, the two devices could not form a neighbor relationship. Which reason for the problem is the most likely?
A. The two routers cannot authenticate with one another
B. The two routers have the same area ID
C. The two routers have the same network ID
D. The two routers have different IS-types
View answer
Correct Answer: C
Question #4
For which reason can two devices fail to establish an OSPF neighbor relationship?
A. The two devices have different process IDs
B. The two devices have different network types
C. The two devices have different router IDs
D. The two devices have the same area ID
View answer
Correct Answer: B
Question #5
Which LSA type is indicated by this router output?
A. type 3 LSA
B. type 4 LSA
C. type 1 LSA
D. type 2 LSA
View answer
Correct Answer: A
Question #6
Which effect of this configuration is true?
A. It sets the keepalive timer to 30 seconds and the hold timer to 240 seconds
B. It sets the keepalive timer to 30 milliseconds and the hold timer to 240 millisecondsC
D. It sets the hold timer to 30 seconds and the keepalive timer to 240 seconds
View answer
Correct Answer: A
Question #7
A network operator is working to filter routes from being advertised that are covered under an aggregate announcement. The receiving router of the aggregate announcement block is still getting some of the more specific routes plus the aggregate. Which configuration change ensures that only the aggregate is announced now and in the future if other networks are to be added?
A. Configure the summary-only keyword on the aggregate command
B. Set each specific route in the AGGRO policy to drop instead of suppress-route
C. Filter the routes on the receiving router
D. Set each specific route in the AGGRO policy to remove instead of suppress-route
View answer
Correct Answer: A
Question #8
Refer to the exhibit. Which attribute can router 1 alter so that only other iBGP peers prefer to use 192.168.4.2 as the nexthop for route 192.168.3.0/24?
A. MED
B. local preference
C. origin
D. weight
View answer
Correct Answer: A
Question #9
Router 1 is a core ABR in a Cisco Unified MPLS environment. All of the router 1 BGP peers are established, but traffic between customers is failing. Which BGP configuration must be added to the configuration?
A. It must be configured for graceful restart
B. It must be configured with a route reflector
C. It must be configured with send labels
D. It must be configured with PIC edge
View answer
Correct Answer: B
Question #10
Router 1 has established an SR-TE tunnel with router 2. Which statement describes this configuration?
A. Router 1 has a list of labels used to explicitly lay out a path to router 2
B. Router 1 and router 2 have a bidirectional tunnel set up with dynamic path selection
C. Router 1 is the head-end tunnel and has dynamically chosen a path to router 2
D. Router 2 is the head-end tunnel and has explicitly set a path to router 1
View answer
Correct Answer: D
Question #11
The ISP_A network is configured with PIMv2 with sparse mode. The engineering team at ISP_A must implement multicast support following RFC 5059 in the network. The RP priority will be 0, and the solution must require limited supervision from the operations team. Which action must the team take to meet the requirements?
A. mplement Auto-RP on the candidate RP and the mapping agent only
B. mplement Static RP across all routers in the network
C. mplement bootstrap router in the network core
D. mplement Anycast-RP on edge routers only
View answer
Correct Answer: C
Question #12
A network operator is getting the route for 10.11.11 0/24 from two upstream providers on #XR3. The network operator must configure #XR3 to force the 10.11.11.0/24 prefix to route via next hop of 10.0.0.9 as primary when available. Which of these can the operator use the routing policy language for, to enforce this traffic forwarding path?
A. weight of 0 on the prefix coming from 192
B. lower local preference on the prefix coming from 192
C. higher local preference on the prefix coming from 192
D. weight of 100 on the prefix coming from 192
View answer
Correct Answer: C
Question #13
Which tree does multicast traffic follow?
A. shared tree
B. MDT default
C. source tree
D. MDT voice
View answer
Correct Answer: B
Question #14
Refer to the exhibit. Refer to the exhibit. Company X is multihomed to a service provider. With the default settings, the link between PE2 and CE1 is the primary link, but company X has asked for the link between PE4 and CE2 to operate as the primary instead. A network engineer used a route map with local-preference to manipulate the routes from PE2 to CE1 to be less desirable and applied the route map on PE2 outbound to CE1. However, the path from PE2 to CE1 is still preferred. Which action must the engin
A. pply local-preference on PE2 outbound to CE2 with a value less than 100
B. onfigure the AS path prepend attribute to increase the number of hops between CE2 and PE4
C. onfigure the weight attribute on PE2 in the outbound direction to CE2 with a value less than 65535
D. pply MED in the outbound direction on PE2 to CE1 with a cost lower than the path from PE4 to CE2
View answer
Correct Answer: B
Question #15
Refer to the exhibit. IS-IS is the routing protocol on the network. After the team noticed excessive CPU usage on all routers, particularly routers R2 and R6, they configured route summarization on all routers. However, a network engineer noticed that summary routes and more specific routes are present in the routing table on R1. Which action must the team take so that R1 receives only the summary routes?
A. onfigure R2 and R4 to perform summarization for Level 1 routers
B. onfigure R3 to perform summarization for Level 1 routers, and configure R6 to perform summarization for Level 2 routers
C. onfigure R3 and R5 to perform summarization for Level 1 and Level 2 routers
D. onfigure R6 only to perform summarization for all routers
View answer
Correct Answer: B
Question #16
Refer to the exhibit. Refer to the exhibit. Unified MPLS is implemented on this network to provide end-to-end services A network engineer noticed that R3 is failing to receive labels from R1 However, R2 is receiving labels from R1 R3 can ping R1 normally Which action resolves the issue?
A. dd the cdp run command to the link configuration between R1 and R3
B. dd the send-label keyword in the R1 neighbor statement for R3
C. onfigure R1 to run Unified MPLS on both interfaces
D. isable mpls Ip on the link between R1 and R3
View answer
Correct Answer: B
Question #17
Router 1 is connected to router 2 on interface TenGigE0/1. Which interface provides the alternate path to 172.16.200.9/32 when the link between router 1 and router 2 goes down?
A. TenGigE0/1 interface provides the alternate path
B. A backup path must be statically installed
C. TenGigE0/2 interface provides the alternate path
D. A primary path must be manually installed
View answer
Correct Answer: B
Question #18
Refer to the exhibit. A network operator must inject a Level 1 route from XR2 (10.16.16.0/24) into the ISIS topology. Whichconfiguration allows the injection in a way that XR3 and XR1 have a valid and working route for 10.16.16.0/24?
A. Option A
B. Option B
C. Option C
D. Option D
View answer
Correct Answer: C
Question #19
Refer to the exhibit. Routers R1, R2, R3, and R4 have been configured to run OSPF, and router R5 is running EIGRP. Trafficfrom R1 to R5 is expected to pass via R4, but OSPF routing has calculated the best path R3. Which action corrects theproblem?
A. Reconfigure R1 in Area 0
B. Configure R3 to use metric-type 1 with a higher metric than R4
C. Configure R1 with a static route to the R5 networks and set R5 as the next hop
D. Change the metric-type value on R3 to 2
View answer
Correct Answer: D
Question #20
R1 is directly connected to R2 and R3. R1 is in BGP AS 123, R2 is in BGP AS 2, and R3 is in BGP AS 3. Assume that there is no connectivity issue between R1, R2 and R1, R3. Which result between BGP peers R1, R2 and R1, R3 is true?
A. The BGP session does not come up between R1 and R2 and between R1 and R3
B. The BGP session comes up between R1 and R2 and between R1 and R3
C. The BGP session comes up between R1 and R3, but not between R1 and R2
D. The BGP session comes up between R1 and R2, but not between R1 and R3
View answer
Correct Answer: C
Question #21
After troubleshooting an OSPF adjacency issue, routers 1, 2, and 3 have formed OSPF neighbor relationships. Which statement about the configuration is true?
A. Router 2 receives a Type 5 LSAs from router 1 for its connected subnets
B. Router 2 uses router 3 as the next hop for 192
C. Router 2 uses router 1 as the next hop for 192
D. Router 2 receives a Type 7 LSAs from router 3 for its connected subnets
View answer
Correct Answer: A

View Answers after Submission

Please submit your email and WhatsApp to get the answers of questions.

Note: Please make sure your email ID and Whatsapp are valid so that you can get the correct exam results.

Email:
Whatsapp/phone number:


Copyright © 2024. Designer by SPOTO Official Website. All Rights Reserved.