DON'T WANT TO MISS A THING?

Certification Exam Passing Tips

Latest exam news and discount info

Curated and up-to-date by our experts

Yes, send me the newsletter

Premium CCNP 350-801 Exam Sample and Realistic Exam Simulations, Cisco Collaboration 350-801 CLCOR | SPOTO

Elevate your Cisco CCNP 350-801 CLCOR exam preparation with our premium exam sample and realistic exam simulations. Our meticulously crafted exam materials encompass a comprehensive array of sample questions, mock exams, and exam dumps that accurately mirror the real certification challenge. Immerse yourself in our online exam simulator, replicating the authentic testing environment with timed practice tests. Bolster your confidence with our in-depth exam preparation resources, covering core collaboration concepts from infrastructure design to call control, QoS, and applications. With our premium offering, featuring exam questions and answers that closely resemble the actual exam, you'll approach the CLCOR certification armed with the essential knowledge and practical skills to excel.
Take other online exams
Question #1
Given this "debug isdn q921" output, what is the problem with the PRI?
A. Layer 1 is down on the controller
B. PRI does not have an IP address configured on the interface
C. Nothing, the PRI is sending keepalives
D. Layer 2 is down on the controller
View answer
Correct Answer: AB

View The Updated 350-801 Exam Questions

SPOTO Provides 100% Real 350-801 Exam Questions for You to Pass Your 350-801 Exam!

Get 350-801 Practice Test
Question #2
How many DNS SRV entries can be defined in the SIP trunk destination address field in Cisco Unified Communications Manager?
A. 1
B. 8
C. 16
D. 4
View answer
Correct Answer: B
Question #3
A present redundancy group is deployed, and an engineer with ID012345678 initiates a manual fallback. Which statement about Cisco Server Recovery Manager is true?
A. disconnects all users that had been failed over, and the users must log in again
B. disconnects all users that had been failed over
C. restarts critical on the secondary node
D. restarts the Cisco Presence Engine
View answer
Correct Answer: C
Question #4
Endpoint A calls endpoint
B. What is the only audio codec that can be used for the call?
A. Telephone-event/8000
B. G7221/16000
C. PCMA/8000
D. G722/8000
View answer
Correct Answer: C
Question #5
A remote office has a less-than-optimal WAN connection and experiences packet loss, delay, and jitter. Which VoIP codec should be used in this situation?
A. G
B. iLBC
C. G
D. G
View answer
Correct Answer: A
Question #6
Which two conditions must a user meet to provision a new device using the Self-Provisioning feature? (Choose two.)
A. The user must have a primary extension
B. At least two DNs must be assigned to the user device
C. The user must be part of “Standard CCM Super User”
D. The user must have the appropriate universal device template linked to the user profile
E. The user must have at least user device profile assigned
View answer
Correct Answer: C
Question #7
An engineer wants to manually deploy a Cisco Webex DX80 video endpoint to an end user. Which type of provisioning can be configured on the endpoint?
A. CUBE
B. CMS
C. CUCM
D. Edge
View answer
Correct Answer: B
Question #8
What is the major difference between the two possible Cisco IM and Presence high-availability modes?
A. Balanced mode provides user load balancing and user failover in the event of an outage
B. Balanced mode provides user load balancing and user failover only for manually generated failovers
C. Balanced mode provides user load balancing and user failover in the event of an outage
D. Balanced mode does not provide user load balancing, but it provides in the event of an outage
View answer
Correct Answer: C
Question #9
Refer to the exhibit The SDP offer/answer has been completed successfully but there is no DTMF when users press keys. What is the cause of the issue?
A. DTMF was negotiated properly in these messages
B. G
C. Payload type 110 was negotiated rather than type 101
D. DTMF was not negotiated on the call
View answer
Correct Answer: A
Question #10
The translation rule is configured on the voice gateway to translate DNIS. What is the outcome if the gateway receives 0255-343-1234 as DNIS?
A. The translation is not matched because DNIS contains “-”
B. The translation is not matched because DNIS does not end with a “$”
C. The translation is matched and the translated number is 02553431234
D. The translation is matched and the translated number is 025553431234
View answer
Correct Answer: BC
Question #11
An engineer with ID012345678 must build an international dial plan in Cisco Unified Communications Manager. Which action should be taken when building a variable-length route pattern?
A. reduce the T302 timer to less than 4 seconds
B. configure single route pattern for international callsC
D. set up all international route patterns to 0
View answer
Correct Answer: CE
Question #12
Which action is required if an engineer wants to have Cisco Unified Communications Manager control the configuration for an MGCP gateway?
A. Apply the ccm-manager configuration commands to the gateway
B. Upload the custom configuration in the TFTP server in Cisco Unified CM
C. From Cisco Unified CM > Device > Gateway > Add gateway, check the auto-configuration check box
D. Configure the Cisco Unified CM's IP in voice service VoIP
View answer
Correct Answer: B
Question #13
When a user dials a number with a phone that is registered to the Cisco Unified Communications Manager, what is the default timeout before the number is sent?
A. 15 seconds
B. 5 seconds
C. 10 seconds
D. 3 seconds
View answer
Correct Answer: A
Question #14
An engineer configures local route group to simplify a dial plan. Where does the engineer set the route groups according to the local route group names that are configured?
A. CSS
B. route pattern
C. device pool
D. route list
View answer
Correct Answer: A
Question #15
Calls are being delivered to the end user in the globalized format. Where does an engineer configure the calling number into a localized format?
A. route pattern
B. service parameters
C. IP phone
D. gateway
View answer
Correct Answer: C
Question #16
A call is failing to establish between two SIP Devices The called device answers with this SOP. Which SDP parameter causes this issue?
A. The payload for G
B. The calling device did not offer a ptime value
C. The media stream is set to sendonly
D. The RTP port is set to 0
View answer
Correct Answer: C
Question #17
What field is configured to change the caller ID information on a SIP route pattern?
A. Route Partition
B. Called Party Transformation Mask
C. Calling Party Transformation Mask
D. Connected Line ID Presentation
View answer
Correct Answer: C
Question #18
An engineer is notified that the Cisco TelePresence MX800 that is registered in Cisco Unified Communications Manager shows an empty panel, and the Touch 10 shows a corresponding icon with no action when pressed. Where does the engineer go to remove the inactive custom panel?
A. The Software Upgrades page in CUCM OS Administration
B. The In-Room Control Editor on the webpage of the MX800
C. The phone configuration page in CUCM Administration
D. The SIP Trunk Security Profile page in CUCM Administration
View answer
Correct Answer: C
Question #19
You deploy Mobile and Remote Access for Jabber and discover that Jabber for Windows does no register to Cisco Unified Communication Manager while outside of the office. What is a cause of this issue?
A. Server 4
B. The DNS record should be created for _cisco-uds
C. The DNS record should be changed from _collab-edge
D. The DNS record type should be changed from SRV to
A.
View answer
Correct Answer: A
Question #20
Which two functionalities does Cisco Expressway provide in the Cisco Collaboration architecture? (Choose two.)
A. Survivable Remote Site Telephony functionality
B. customer interaction management services
C. secure firewall and NAT traversal for mobile or remote Cisco Jabber and TelePresence Video endpointsD
E. Secure business-to-business communications
View answer
Correct Answer: D
Question #21
An engineer implements QoS in the enterprise network. Which command can be used to verify the correct classification and marking on a Cisco IOS switch?
A. show class-map interface GigabitEthernet 1/0/1
B. show policy-map interface GigabitEthernet 1/0/1
C. show policy-map
D. show access-lists
View answer
Correct Answer: A

View Answers after Submission

Please submit your email and WhatsApp to get the answers of questions.

Note: Please make sure your email ID and Whatsapp are valid so that you can get the correct exam results.

Email:
Whatsapp/phone number:


Copyright © 2024. Designer by SPOTO Official Website. All Rights Reserved.