DON'T WANT TO MISS A THING?

Certification Exam Passing Tips

Latest exam news and discount info

Curated and up-to-date by our experts

Yes, send me the newsletter

Pass Your Fortinet NSE7_SDW-7.2 Exam Prep: Fortinet NSE7_SDW-7.2 Study Materials, Fortinet NSE 7 SD-WAN | SPOTO

Prepare effectively for the Fortinet NSE7_SDW-7.2 certification exam with SPOTO's comprehensive study materials! This certification assesses your proficiency in Fortinet's SD-WAN solution, covering integration, administration, troubleshooting, and central management using FortiOS 7.2.SPOTO offers high-quality practice tests that guarantee a 100% pass rate, ensuring you're fully equipped for success. Access exam questions, sample questions, exam materials, and exam answers to enhance your preparation.Take advantage of our free tests, exam dumps, and expertly curated study resources to master key concepts and boost your confidence. Our exam simulator, online exam questions, and mock exams simulate the real exam environment, preparing you for exam day.Choose SPOTO for original, professional, and reliable study materials to pass your Fortinet NSE7_SDW-7.2 exam with ease!
Take other online exams
Question #1
Which diagnostic command can you use to show the member utilization statistics measured by performance SLAs for the last 10 minutes?
A. diagnose sys sdwan intf-sla-log
B. diagnose sys sdwan health-check
C. diagnose sys sdwan log
D. diagnose sys sdwan sla-log
View answer
Correct Answer: C
Question #2
Which statement defines how a per-IP traffic shaper of 10 Mbps is applied to the entire network?
A. FortiGate allocates each IP address a maximum 10 Mbps of bandwidth
B. Each IP is guaranteed a minimum 10 Mbps of bandwidth
C. A single user uses the allocated bandwidth divided by total number of users
D. The 10 Mbps bandwidth is shared equally among the IP addresses
View answer
Correct Answer: A
Question #3
Which are three key routing principles in SD-WAN? (Choose three.)
A. FortiGate performs route lookups for new sessions only
B. Regular policy routes have precedence over SD-WAN rules
C. SD-WAN rules have precedence over ISDB routes
D. By default, SD-WAN members are skipped if they do not have a valid route to the destination
E. By default, SD-WAN rules are skipped if the best route to the destination is not an SD-WAN member
View answer
Correct Answer: AC
Question #4
Refer to the exhibit.Which two statements about the debug output are correct? (Choose two )
A. The debug output shows per-IP shaper values and real-time readings
B. This traffic shaper drops traffic that exceeds the set limits
C. Traffic being controlled by the traffic shaper is under 1 Kbps
D. FortiGate provides statistics and reading based on historical traffic logs
View answer
Correct Answer: AB
Question #5
An administrator is troubleshooting SD-WAN on FortiGate. A device behind branch1_fgt generates traffic to the 10.0.0.0/8 network. The administrator expects the traffic to match SD-WAN rule ID 1 and be routed over T_INET_0_0. However, the traffic is routed over T_INET_1_0. Based on the output shown in the exhibit, which two reasons can cause the observed behavior? (Choose two.)
A. The traffic matches a regular policy route configured with T_INET_1_0 as the outgoing device
B. T_INET_1_0 has a lower route priority value (higher priority) than T_INET_0_0
C. T_INET_0_0 does not have a valid route to the destination
D. T_INET_1_0 has a higher member configuration priority than T_INET_0_0
View answer
Correct Answer: C
Question #6
Exhibit. Which conclusion about the packet debug flow output is correct?
A. The total number of daily sessions for 10
B. The packet size exceeded the outgoing interface MTU
C. The number of concurrent sessions for 10
D. The number of concurrent sessions for 10
View answer
Correct Answer: CD
Question #7
Refer to the exhibit.Which statement about the trace evaluation by FomGate is true?
A. Packets exceeding the configured maximum concurrent connection limit are denied by the per-IP shaper
B. The packet exceeded the configured bandwidth and was dropped based on the priority configuration
C. The packet exceeded the configured maximum bandwidth and was dropped by the shared shaper
D. Packets exceeding the configured concurrent connection limit are dropped based on the priority configuration
View answer
Correct Answer: A
Question #8
Refer to exhibits.Exhibit A shows the performance SLA exhibit B shows the SD-WAN diagnostics output.Based on the exhibits, which statement is correct?
A. Both SD-WAN member interfaces have used separate SLA targets
B. The SLA state of port1 is dead after five unanswered requests by the SLA servers
C. Port1 became dead 1ecause no traffic was offload through the egress of port1
D. SD-WAN member interfaces are affected by the SLA state of the inactive interface
View answer
Correct Answer: B
Question #9
Based on the exhibit, which two actions does FortiGate perform on sessions after a firewall policy change? (Choose two.)
A. FortiGate flushes all sessions
B. FortiGate terminates the old sessions
C. FortiGate does not change existing sessions
D. FortiGate evaluates new sessions
View answer
Correct Answer: D
Question #10
Which diagnostic command you can use to show interface-specific SLA logs for the last 10 minutes?
A. diagnose sys virtual-wan-link health-check
B. diagnose sys virtual-wan-link log
C. diagnose sys virtual-wan-link sla-log
D. diagnose sys virtual-wan-link intf-sla-log
View answer
Correct Answer: C
Question #11
Which configuration change is required if the responder FortiGate uses a dynamic routing protocol to exchange routes over IPsec?
A. type must be set to static
B. mode-cfg must be enabled
C. exchange-interface-ip must be enabled
D. add-route must be disabled
View answer
Correct Answer: D
Question #12
Refer to exhibits.Exhibit A shows the firewall policy and exhibit B shows the traffic shaping policy.The traffic shaping policy is being applied to all outbound traffic; however, inbound traffic is notbeing evaluated by the shaping policy.Based on the exhibits, what configuration change must be made in which policy so that trafficshaping can be applied to inbound traffic?
A. The reverse shaper option must be enabled and a traffic shaper must be selected
B. The guaranteed-10mbps option must be selected as the reverse shaper option
C. A new firewall policy must be created and SD-WAN must be selected as the incoming interface
D. The guaranteed-10mbps option must be selected as the per-IP shaper option
View answer
Correct Answer: B
Question #13
Which two reasons make forward error correction (FEC) ideal to enable in a phase one VPNinterface? (Choose two )
A. FEC transmits the original payload in full to recover the error in transmission
B. FEC improves reliability which overcomes adverse WAN conditions such as noisy links
C. FEC is useful to increase speed at which traffic is routed through IPsec tunnels
D. FEC transmits additional packets as redundant data to the remote device
E. FEC reduces the stress on the remote device jitter buffer to reconstruct packet loss
View answer
Correct Answer: BD
Question #14
In a hub-and-spoke topology, what are two advantages of enabling ADVPN on the IPsec overlays? (Choose two.)
A. It provides the benefits of a full-mesh topology in a hub-and-spoke network
B. It provides direct connectivity between spokes by creating shortcuts
C. It enables spokes to bypass the hub during shortcut negotiation
D. It enables spokes to establish shortcuts to third-party gateways
View answer
Correct Answer: A

View Answers after Submission

Please submit your email and WhatsApp to get the answers of questions.

Note: Please make sure your email ID and Whatsapp are valid so that you can get the correct exam results.

Email:
Whatsapp/phone number:


Copyright © 2024. Designer by SPOTO Official Website. All Rights Reserved.