DON'T WANT TO MISS A THING?

Certification Exam Passing Tips

Latest exam news and discount info

Curated and up-to-date by our experts

Yes, send me the newsletter

Pass Your CCNP 300-610 Exam with Practice Tests 2024 Updated, Cisco Data Center 300-610 DCID | SPOTO

Prepare for the CCNP 300-610 exam confidently with our updated practice tests. Our comprehensive exam materials cover key topics such as network designs with virtualization technologies, Layer 2 and Layer 3 technologies, routing protocols, and data center interconnect design options. Gain an edge with our meticulously crafted sample questions and mock exams, providing you with valuable exam practice. Access our free test to gauge your readiness and enhance your understanding of Cisco Data Center Infrastructure. With our reliable exam questions and answers, you can effectively prepare for the exam and excel in your certification journey. Take advantage of our online exam questions and exam simulator to simulate real exam scenarios and boost your confidence. With our resources, passing the CCNP 300-610 exam is within reach.

Take other online exams

Question #1
An engineer configured the OSPF protocol in the vPC topology. During the catastrophic failure of one of the vPC member switches, the traffic was routed to a black hole. This route was caused by the long convergence time caused by the delay of the vPC member switch reboot. After the failure, the engineer rebooted both switches, but the secondary switch powered on before the primary one. It caused all the vPCs to be shut down due to consistency-check violations. Which two features must be used to prevent thes
A. peer-gateway
B. ip arp synchronize
C. delay restore
D. auto-recovery
E. system priority
View answer
Correct Answer: D

View The Updated CCNP 300-610 Exam Questions

SPOTO Provides 100% Real CCNP 300-610 Exam Questions for You to Pass Your CCNP 300-610 Exam!

Question #2
A network engineer is designing a Cisco Hyperflex infrastructure. The infrastructure will be connected to an external SAN fiber channel array and must support Microsoft clustering. Which storage connectivity method must be used to meet these requirements?
A. Fibre Channel over Ethernet
B. Internet Small Computer Systems Interface
C. raw device mapping
D. server message block
View answer
Correct Answer: A
Question #3
A network engineer is implementing Cisco UCS Manager with Cisco UCS Central integration. The company's strict security policies require that the logical profile of virtual network adapters and logical addressing assigned to Cisco UCS servers be managed by the Cisco UCS Manager. The users must also be prevented from being able to acknowledge pending activities in the Cisco UCS Manager. Which two profiles must be used to meet these requirements? (Choose two.)
A. global maintenance
B. local service
C. local power
D. restricted chassis
E. public network control
View answer
Correct Answer: C
Question #4
A Cisco UCS chassis that has two IOMs is discovered. The chassis discovery policy creates a fabric port channel. What is the result of this policy?
A. Cisco UCS Manager creates two separate fabric port channels
B. Cisco UCS Manager creates a single fabric port channel
C. The port channel is disabled until an administrator enables it manually
D. Each uplink that connects an IOM is configured as a discrete link
View answer
Correct Answer: B
Question #5
An engineer must interconnect two geographically separated data centers. The service provider offers a Layer 2 Metro Ethernet link. The strict security policy requires that the information that is shared between two sites must be sent encrypted. The application deployed between two sites requires a line-rate throughput regardless of the packet size and speed. Which solution meets these requirements?
A. L2TPv2
B. IPsec
C. MACsec
D. L2TPv3
View answer
Correct Answer: S
Question #6
A storage engineer requires a solution that achieves multiple paths between a server and storage array. The design must support complete traffic isolation and support a 50% growth in the next year. Which FCoE solution meets these requirements?
A. single switch with multiple links
B. at least two VSANs across the fabric
C. at least two FC zone sets with multiple zones
D. single VSAN across the fabric
View answer
Correct Answer: BD
Question #7
An engineer installs a B-Series server in a Cisco UCS chassis that contains a pair of UCS-IOM-2208XP I/O modules. The full bandwidth of the I/O module must be utilized. Which two elements should be used in this environment? (Choose two.)
A. four twinax cables from each I/O module to each fabric interconnect
B. Cisco UCS VIC 1225
C. eight twinax cables from each I/O module to each fabric interconnect
D. Cisco UCS M81KR
E. Cisco UCS VIC 1280
View answer
Correct Answer: B
Question #8
Which two methods mitigate congestion in a SAN network? (Choose two.)
A. Configure ER_RDY to allow splitting of each ISL between switches into separate virtual links
B. Use the port-monitor command to detect slow drain devices
C. Configure the port channel to enable individual buffer-to-buffer credits
D. Configure the port monitor to allow categorization of a specific device as slow
E. Configure the flow control for the FC to use R_RDY
View answer
Correct Answer: BC
Question #9
Which two vSphere features must be included in the design of a Cisco HyperFlex systems stretched cluster? (Choose two.)
A. HA
B. VSSC
D. VDP
E. DRS
View answer
Correct Answer: AD
Question #10
Which factor determines the choice of platform designing a Cisco HyperFlex infrastructure to support computer-aided design applications?
A. network speed
B. GPU support
C. storage capacity
D. processor count
View answer
Correct Answer: AC
Question #11
A customer needs to deploy a three-tier network architecture that will consist of web, app, and other business-critical applications. The solution will include Cisco UCS 6324 Fabric Interconnects managing B and C series servers. The fabric interconnects will be connected to the Cisco Nexus 7706 Series Switch for network access. A storage array will be directly connected to the UCS fabric interconnects. Which UCS deployment type must be used to meet these requirements?
A. UCS interconnect in Ethernet switching mode UCS interconnect in Fibre Channel switching mode Fabric Interconnects uplinked to the Nexus device using an LACP port-channel in passive mode
B. UCS interconnect in Ethernet end-host mode UCS interconnect in Fibre Channel end-host mode Fabric Interconnects uplinked to the Nexus device using an LACP port-channel in passive mode
C. UCS interconnect in Ethernet end-host mode UCS interconnect in Fibre Channel switching mode Fabric Interconnects uplinked to the Nexus device using an LACP port-channel in active mode
D. UCS interconnect in Ethernet switching mode UCS interconnect in Fibre Channel end-host mode Fabric Interconnects uplinked to the Nexus device using an LACP port-channel in active mode
View answer
Correct Answer: C
Question #12
An engineer must connect an existing Cisco UCS Fabric Interconnect to an IP-based storage array. The connection must be a port channel made directly between the fabric interconnect expansion module and the storage array. The engineer must also consider that the environment is running FCoE for storage and uses QoS to prioritize traffic. Which port type should be used to meet these requirements?
A. network
B. uplink
C. server
D. appliance
View answer
Correct Answer: S
Question #13
A network engineer designs a Cisco Nexus data center network for a client-server farm using a pair of Nexus 9000 Series Switches in a vPC setup. Each server connects with two interfaces to both Nexus switches. The Nexus switches must always initiate the negotiation with the server. Which feature should be used in this design to ensure traffic is forwarded from the server to the data center network?
A. PAgP mode desirable
B. LACP mode auto
C. LACP mode active
D. PAgP mode auto
View answer
Correct Answer: B
Question #14
An engineer is designing a Multichassis EtherChannel topology in which two switches must appear as a single device to a third downstream switch. Which two technologies meet this requirement? (Choose two.)
A. HSRP
B. VSS
C. vPC
D. 802
E. FEX
View answer
Correct Answer: C
Question #15
A network architect proposes a distinct Fibre Channel fabric to be used for a Cisco UCS blade server that hosts critical applications. Which action should be implemented for the Fibre Channel traffic from the vHBA of this server to pass through the I/O Module in the Cisco UCS chassis to a specified uplink Fibre Channel port?
A. Update the applied global QoS policy
B. Update the applied Fibre Channel adapter policy
C. Enable Persistent Binding in the vHBA policy
D. Include a SAN pin group in the vHBA policy
View answer
Correct Answer: D
Question #16
What can be implemented on Cisco Nexus 5600 Series Switches for link redundancy within a Fibre Channel fabric?
A. vPC+
B. E-Trunk
C. SAN port channel
D. LACP port channel
View answer
Correct Answer: BC
Question #17
An engineer is experiencing performance issues on a Cisco UCS blade server. The B-Series blade server contains four CPUs, most of which are idle. The engineer notices that the CPU is suffering from too many requests sent by the NIC. Additionally, the number of queues appears to be insufficient and only a single CPU is processing the network traffic. Which policy must be used to alleviate these issues?
A. LAN connectivity
B. dynamic vNIC connection
C. Ethernet adapterD
View answer
Correct Answer: C
Question #18
A high-availability setup for iSCSI is designed with the host running iSCSI multipath software. Each IP storage port on the MDS switch exports the same two Fibre Channel target ports with different iSCSI target names. In this design, how many iSCSI sessions are created from the host so that recovery occurs if any component fails?
A. 2
B. 3
C. 4
D. 5
View answer
Correct Answer: B
Question #19
After experiencing traffic disruptions from the failure of a single router, a customer asks an engineer to design a solution that will prevent this from occurring in the future. While examining the customer's environment, the engineer discovers that the routers are manufactured by a variety of different vendors, and they have varying amounts of CPU and memory resources. Additionally, several of the customer's applications require the ability to fine-tune the load-balancing parameters between multiple gatewa
A. VRRP
B. FHRP
C. HSRP
D. GLBP
View answer
Correct Answer: BC
Question #20
An engineer must build a VXLAN flood-and-learn network. The customer requires the solution to be based on the IETF documented practice in RFC 7348. The solution must use broadcast, unknown unicast, and multicast (BUM) and include the efficient BUM and short BUM replication modes that use only shared trees. Which technology meets these requirements?
A. MVPN
B. PIM sparse mode
C. PIM SSM
D. Bidirectional PIM
View answer
Correct Answer: D
Question #21
A client in a commercial building installs a Cisco blade server in the multitenant Cisco UCS blade infrastructure. To cut operating costs, the client's data center is shared with other organizations. The client asks an engineer to prevent third parties from accessing their equipment and from accessing BIOS-related information when booting a server. Which two policies must be used to meet these requirements? (Choose two.)
A. post error pause
B. CDN control
C. ASPM support
D. front panel lockout
E. quiet boot
View answer
Correct Answer: CD
Question #22
An engineer is expanding an existing iSCSI environment and must choose an addressing scheme. When checking one of the devices, the engineer discovers this target device naming used: {prefix}.2019- 01.com.acme123:00.ffd0cb21.bcb392817521 Which addressing scheme was used in the environment?
A. Network Address Authority
B. Extended Unique Identifier
C. iSCSI Qualified Name
D. Fibre Channel ID
View answer
Correct Answer: D

View The Updated CCNP Exam Questions

SPOTO Provides 100% Real CCNP Exam Questions for You to Pass Your CCNP Exam!

View Answers after Submission

Please submit your email and WhatsApp to get the answers of questions.

Note: Please make sure your email ID and Whatsapp are valid so that you can get the correct exam results.

Email:
Whatsapp/phone number: