Pass Your CCNP 350-601 Exam with Practice Tests 2024 Updated, Cisco Data Center 350-601 DCCOR | SPOTO

Prepare to pass your Cisco Data Center 350-601 DCCOR exam with our 2024 updated practice tests. This 120-minute exam, part of the CCNP and CCIE Data Center Certifications, assesses your proficiency in implementing core data center technologies like network, compute, storage network, automation, and security. Our exam dumps, sample questions, and mock exams provide a comprehensive review of exam topics, while our exam simulator and online exam questions offer interactive practice opportunities. Access our exam materials to enhance your exam preparation experience. With our high-quality resources and focused exam practice, you'll be well-prepared to excel in the Cisco Data Center 350-601 DCCOR exam and achieve certification success.

Take other online exams

Question #1

A server engineer wants to control power usage on a Cisco UCS C-Series rack server down to the component level. Which two components support specific power limits? (Choose two.)

A. storage controller

B. network controller C

View answer

Correct Answer: C

View The Updated 350-601 Exam Questions

SPOTO Provides 100% Real 350-601 Exam Questions for You to Pass Your 350-601 Exam!

Get 350-601 Practice Test

Question #2

What must be connected to clear the HA NOT READY status?

A. Layer 1-Layer 2 ports

B. server chassis C

View answer

Correct Answer: B

Question #3

An engineer is implementing OTV on a transport that supports multicast. The solution needs to meet the following requirements: Establish adjacency to the remote peer by using multicast. Enable OTV advertisements for VLAN 100 to the other site. Which two commands should be configured to meet these requirements? (Choose two.)

A. otv extend-vlan 100

B. otv site-vlan 100 C

E. otv control-group 232

View answer

Correct Answer: B

Question #4

Which setting must be configured to prevent the reuse of passwords?

A. Change Interval

B. No Change Interval

C. History Count

D. Change Count

View answer

Correct Answer: CE

Question #5

Which mroute state is created when Bidirectional PIM is deployed at a site? A.*,G B.MVPN Type-6 C.MVPN Type-7 D.S,G

Which mroute state is created when Bidirectional PIM is deployed at a site? A. ,G B

View answer

Correct Answer: A

Question #6

A network engineer plans to upgrade the current software images of a Cisco Nexus switch. What is the impact of starting the EPLD upgrade?

A. The switch reboots one time for the new EPLD versions to take effect

B. The switch reboots multiple times for the new EPLD versions to take effect

View answer

Correct Answer: DE

Question #7

Which VLANs are capable to be assigned on vPC interfaces?

A. 100-102

B. 100-103 C

View answer

Correct Answer: C

Question #8

Due to a major version change, an engineer must perform a software upgrade on a Cisco Nexus Series switch. Which two technologies should be implemented to reduce disruptions to the network during the upgrade? (Choose two.) A.vPC

B. HSRP C

View answer

Correct Answer: A

Question #9

A network engineer repeatedly saves a configuration on Catalyst switches to NVRAM using the write memory command. Which action should be taken to implement the same action on Nexus switches?

A. Use the alias command to use the write memory command

B. Use the wri command to use the copy running-config startup-config command

View answer

Correct Answer: D

Question #10

Which statement about the default gateway configuration of the vPC is true?

A. Either switch can act as the active default gateway

B. N7K-1 acts as the default gateway for all traffic

View answer

Correct Answer: A

Question #11

Which two statements about the routing table of the leaf switch are true? (Choose two.)

A. 10

B. The next hop 10

E. The next hop 10

View answer

Correct Answer: AE

Question #12

What is configured as a result of running these commands?

A. loose unicast RPF B

View answer

Correct Answer: B

Question #13

Which MAC address is an HSRP version 2?

A. 3842

B. 0000

View answer

Correct Answer: A

Question #14

All switches are configured with the default OSPF priority. Which configuration should be applied to ensure that the SW2 Cisco Nexus switch controls the LSA floods and advertises the network to the remaining nodes in the OSPFv2 area?

A. SW2# configure terminal SW2 (config)# interface ethernet 1/1 SW2 (config-if)# ip ospf priority 255

B. SW2# configure terminal SW2 (config)# interface ethernet 1/1 SW2 (config-if)# ip ospf priority 1 C

View answer

Correct Answer: A

Question #15

Which virtual MAC address is the default for HSRP version 2 group 10?

A. 0000

B. 0000

View answer

Correct Answer: B

Question #16

Cisco Fabric Services is enabled in the network. Which type of IP address is used by the Cisco Fabric Services protocol?

A. IPv4 multicast address

B. IPv4 unicast address C

View answer

Correct Answer: D

Question #17

An engineer needs to create a new user in the local user database on Cisco UCS Fabric Interconnect. The user needs permissions to change the following configuration inside UCS Manager version 3.1: vNIC and vHBA profiles Fan speed and power redundancy profile of UCS Manager Which two roles must be assigned to a user to achieve this goal? (Choose two.)

A. facility-manager

B. server-equipment C

E. server-compute

View answer

Correct Answer: D

Question #18

Which action must be performed before renumbering a Cisco UCS chassis?

A. Run the shut and no shut command on the connected ports

B. Move the chassis to new ports on fabric interconnect

View answer

Correct Answer: A

Question #19

An engineer must configure a Nexus 7000 series switch for HSRP on VLAN 100. When fully functional, the router must be the active master. Which set of commands must be used to implement the scenario? A.feature hsrp interface vlan100 ip address 10.1.1.2 255.255.255.0 priority 255 preempt hsrp version 2 hsrp 1000 ip 10.1.1.1 B.feature-set hsrp interface vlan100 ip address 10.1.1.2 255.255.255.0 priority 20 preempt hsrp version 2 hsrp 1000 ip 10.1.1.1 C.feature-set hsrp interface vlan100 ip address 10.1.1.2 255

An engineer must configure a Nexus 7000 series switch for HSRP on VLAN 100. When fully functional, the router must be the active master

View answer

Correct Answer: A

Question #20

A small remote office is set to connect to the regional hub site via NSSA ASBR. Which type of LSA is sent to the remote office OSPF area?

A. type 7 LSA

B. type 1 LSA C

View answer

Correct Answer: A

Question #21

What are two capabilities of the Cisco Network Assurance Engine? (Choose two.)

A. It validates that devices comply with network security policies

B. It predicts the impact of changes to the network

E. It verifies the speed of network packet flows by using telemetry

View answer

Correct Answer: D

Question #22

A customer has a requirement to deploy a cloud service and needs to have full control over the underlying OS, data and applications. Which cloud model meets this requirement?

A. MaaS

B. PaaS C

View answer

Correct Answer: D

Question #23

The STP priority of N7K-1 and N7K-2 are the lowest in the network. Which statement describes STP on the vPC?

A. N7K-1 and N7K-2 appear as a single STP root

B. N7K-1 appears as the STP root

View answer

Correct Answer: A

Question #24

Which method must a network engineer use to upgrade the BIOS firmware or a Cisco UCS standalone C-Series rack-mount server?

A. Use the U-ACPI Interface

B. Use the Cisco host upgrade utility

View answer

Correct Answer: BE

Question #25

A DNS server with IP address 192.168.1.1 is deployed in a data center. A network engineer must configure a Cisco UCS Fabric Interconnect to use this DNS. Which configuration should be applied? A.ficl-mgmt-A# scope fabric-interconnect a ficl-mgmt-A /fabric-interconnect # set name 192.168.1.1 ficl-mgmt-A /fabric-interconnect # scope system ficl-mgmt-A /system # commit-buffer B.ficl-mgmt-A# scope system ficl-mgmt-A /system # create dns 192.168.1.1 ficl-mgmt-A /system* # commit-buffer C.ficl-mgmt-A# scope fabri

A DNS server with IP address 192. 68

View answer

Correct Answer: A

Question #26

Which statement about the ERSPAN configuration in this environment is true?

A. The session number of the source of ERSPAN spanned traffic must have a session ID of 47 for the traffic analyzer to receive the traffic

B. Host B is the source of ERSPAN spanned traffic and host A is the traffic analyzer

View answer

Correct Answer: D

Question #27

What occurs when running the command install deactivate while a software maintenance upgrade is performed on a Cisco Nexus 9000 Series switch?

A. The current set of packages is committed

B. The package features for the line card are disabled

View answer

Correct Answer: A

Question #28

What is an advantage of streaming telemetry over SNMP? A.on-change traps sent to a receiver B.periodic push-based subscription messages C.periodic polling of the device status D.MD5-based authentication on polling

What is an advantage of streaming telemetry over SNMP? A. n-change traps sent to a receiver B

View answer

Correct Answer: AB

Question #29

What is the reason the system-fm-vrrp checkpoint was created?

A. The VRRP process crashed and the checkpoint was automatically created

B. The VRRP service restarted and the checkpoint was automatically created

View answer

Correct Answer: C

Question #30

The engineer must configure SPAN on a Cisco Nexus 5000 Series Switch to get a capture of the traffic from these applications for an in-depth packet analysis. Which two SPAN characteristics must be considered? (Choose two.)

A. SPAN source ports can be monitored in multiple SPAN sessions

B. The Ethernet, FC, vFC, port channel, SAN port channel can be used as SPAN source ports

E. The rx/tx option is available for VLAN or VSAN SPAN sessions

View answer

Correct Answer: BC

Question #31

An engineer needs to implement a monitoring session that should meet the following requirements: Monitor traffic from leaf to leaf switches on a Cisco ACI network Support filtering traffic from Bridge Domain or VRF Which configuration must be added to meet these requirements?

A. interface eth 1/2 leaf 101

B. application epg epg1 app1 C

View answer

Correct Answer: B

Question #32

APIC EPG Resolution Immediacy is set to "Immediate". Which statement is true about the Deployment Immediacy for VMM domains associated to EPGs?

A. If "On demand" is selected, the policy is programmed in the hardware only when the first packet is received through the data path

B. If "Immediate" is selected, the policy is programmed in the hardware as soon as the leaf is booted

View answer

Correct Answer: B

Question #33

What is the result of running the command presented?

A. Multicast traffic forwarding is suspended

B. MRIB is flushed

View answer

Correct Answer: AC

View Answers after Submission

Please submit your email and WhatsApp to get the answers of questions.

Note: Please make sure your email ID and Whatsapp are valid so that you can get the correct exam results.

Email:

Whatsapp/phone number:

DON'T WANT TO MISS A THING?

100% Pass Cisco, PMP, CISA, CISM, AWS Practice test on SALE!
Get Now

Pass Your CCNP 350-601 Exam with Practice Tests 2024 Updated, Cisco Data Center 350-601 DCCOR | SPOTO

View The Updated 350-601 Exam Questions

View Answers after Submission

DON'T WANT TO MISS A THING?

100% Pass Cisco, PMP, CISA, CISM, AWS Practice test on SALE! Get Now

Pass Your CCNP 350-601 Exam with Practice Tests 2024 Updated, Cisco Data Center 350-601 DCCOR | SPOTO

View The Updated 350-601 Exam Questions

View Answers after Submission

100% Pass Cisco, PMP, CISA, CISM, AWS Practice test on SALE!
Get Now