DON'T WANT TO MISS A THING?

Certification Exam Passing Tips

Latest exam news and discount info

Curated and up-to-date by our experts

Yes, send me the newsletter

Pass Your CCNP 300-615 Exam with Practice Tests 2024 Updated, Cisco Data Center 300-615 DCIT | SPOTO

Achieve success in your CCNP 300-615 exam with our updated practice tests for Cisco Data Center 300-615 DCIT certification. Our comprehensive exam materials cover troubleshooting aspects across network, compute platforms, storage network, automation, management, and operations within a data center infrastructure. Access our free test to evaluate your readiness and proficiency. Utilize our exam dumps and exam answers to solidify your preparation strategy. Delve into the Troubleshooting Cisco Data Center Infrastructure course to equip yourself with the requisite skills and knowledge for success. With our exam simulator and online exam questions, simulate real exam scenarios to boost your confidence on exam day. Trust SPOTO for top-tier resources to ensure you're fully prepared to pass your CCNP 300-615 exam with flying colors.
Take other online exams
Question #1
The connection between a Cisco Nexus 5548UP switch and a Cisco MDS switch fails to initialize. What is the cause of the issue?
A. VSAN 1 is suspended
B. The SFP is unsupported
C. Trunk mode must be activated
D. The interface is in an incorrect mode
View answer
Correct Answer: A

View The Updated 300-615 Exam Questions

SPOTO Provides 100% Real 300-615 Exam Questions for You to Pass Your 300-615 Exam!

Get 300-615 Practice Test
Question #2
Cisco Unified Computing System Manager raises a critical error message that indicates that the system has overlapping Ethernet and FCoE VLANs. All of the Ethernet traffic on the overlapping VLANs drops. Which action resolves the issue?
A. Modify the VLAN assignment to vNICs
B. Change the PIN groups on the vHBAs
C. Modify the FCoE VLAN
D. Set the FCoE VLAN as the native VLAN on server uplinks
View answer
Correct Answer: S
Question #3
A customer configures HSRP between two data centers that are interconnected with OTV. The configuration succeeds, but traffic between two ESXi virtual hosts on the same site is routed suboptimally through the OTV overlay. Which two actions optimize the traffic? (Choose two.)
A. Disable first-hop redundancy
B. Filter HSRP traffic by using a Layer 3 VACL on the OTV edge devices
C. Filter HSRP by using a Layer 2 MAC-list on the ESXi vSwitch
D. Filter HSRP traffic by using a Layer 3 VACL on the ESXi vSwitch
E. Filter HSRP by using a Layer 2 MAC-list on the OTV edge devices
View answer
Correct Answer: AB
Question #4
An engineer attempts to register Cisco UCS Manager to Cisco UCS Central, but the registration fails. The engineer can ping Cisco UCS Central from UCS Manager. Which two actions must the engineer attempt to resolve the problem? (Choose two.)
A. Synchronize the date and time to NTP for Cisco UCS Central and the Cisco UCS domains
B. Apply the UCS Central license to UCS Central
C. Place Cisco UCS Manager on the same subnet as Cisco UCS Central
D. Allow port 443 between Cisco UCS Manager and Cisco UCS Central
E. Allow port 9443 between Cisco UCS Manager and Cisco UCS Central
View answer
Correct Answer: D
Question #5
You have an ACI environment with three APICs, two spine switches, and four-leaf switches. You wipe and reboot all APICs first then leaf and spine switches one-by-one and successfully go through the Initial Setuo dialogue on the APIC 1 CIMC KVM console. When you log in to the APIC1 WebGUI, you notice that you do not see any directly connected leaf switches being discovered under Fabric > Inventory > Fabric Membership. What is the cause of the issue?
A. The leaf nodes were not erased properly, which caused a fabric parameters mismatch with the APIC1
B. Rebooting the APICs and the leaf and spine switches after wiping them is not required
C. You forgot to enter the TEP Pool value during the Initial Setup dialogue on APIC1
D. The same Fabric Name value should be used before after wiping all devices
View answer
Correct Answer: AD
Question #6
An engineer is performing a health check on ACI. Which statement about interface Ethernet 1/11 is true?
A. The interface is working correctly and fully operational, but it is not in use
B. The interface policy is misconfigured
C. “out-of-service” is the default interface status in ACI
D. “out-of-service” indicates that no service graph is in use for this interface
View answer
Correct Answer: A
Question #7
An engineer is troubleshooting a failed DCBX exchange between a server and a Cisco Nexus switch. Which action allows DCBX to successfully negotiate?
A. Enable ETS
B. Enable PFC
C. Enable Cisco Discovery Protocol
D. Enable LLDP
View answer
Correct Answer: C
Question #8
An engineer is troubleshooting why user1, user2, and user3 from group STORAGE-ADMINISTRATOR in Microsoft Active Directory cannot log in to the Cisco MDS SSH CLI. Which action resolves the issue?
A. Configure the role name to match the group name on Microsoft Active Directory
B. Include specific users into MDS role configuration
C. Configure SSH logins on Cisco MDS switch
D. Integrate Cisco MDS with Microsoft Active Directory
View answer
Correct Answer: B
Question #9
An engineer discovers that an NPV/NPIV uplink experiences a heavy load and plans to add more uplinks. Which statement about what occurs when the new uplinks are added is true?
A. Only new connections use the new uplinks automatically
B. Paths must be defined before new connections can use the new uplinks
C. All connections must be reset before the new uplinks can be used
D. New and existing connections use the new uplinks automatically
View answer
Correct Answer: C
Question #10
An attempt to use a global vNIC redundancy template pair results in a service profile that fails to apply. Which action resolves the issues?
A. Create the peer names before creating the templates
B. Assign the secondary template first, and then set the peer name
C. Assign both templates simultaneously
D. Assign the primary template first, and then set the peer name
View answer
Correct Answer: A
Question #11
Interface fc1/5 is offline. Which action should be taken to troubleshoot the issue?
A. Activate the correct zoneset for VSAN 100
B. Update the FLOGI database to contain the FLOGI entries for interface fc1/5 in VSAN 100
C. Update the FCNs database to contain names for VSAN 100
D. Configure the upstream ports and the server ports to be in VSAN 100
View answer
Correct Answer: A
Question #12
A new Cisco Nexus 5548 Switch connects to a network. SAN switching is configured on the switch. The switch fc2/10 NP uplink is shown in the exhibit. Which action ensures that fc2/10 is in an up state?
A. Replace the SFP port module in fc2/10
B. Configure the admin port type E on the upstream switch that connects the port
C. Enable NPIV on the upstream switch that connects the port
D. Configure the BB_credit buffers on the upstream switch that connects the port
View answer
Correct Answer: DE
Question #13
An attempt to bind the Ethernet interface to vFC fails. Which action resolves the issue?
A. Add the FCoE VLAN to the allowed VLAN list
B. Configure the FCoE VLAN that corresponds to the vFC VSAN as a private VLAN
C. Configure the interface as a trunk port
D. Configure the interface to use the native VLAN of the trunk port
View answer
Correct Answer: C
Question #14
A web browser displays a “not secure” warning message when accessing the web interface of Cisco UCS Manager. Which action resolves the issue?
A. Load third-party certificate to UCS Manager
B. Use the correct TCP port for HTTPS
C. Use a supported web browser
D. Use a supported version of UCS Manager
View answer
Correct Answer: A
Question #15
A user reports that they cannot reach from a UCS server to an FC Storage array. Which command is used to test communication between an FCF and a target?
A. fcroute
B. traceroute
C. fcping
D. ping
View answer
Correct Answer: S
Question #16
An engineer removes a VMM domain from an endpoint group called EPG-1, but the distributed port group fails to be deleted. Which action must be taken to resolve the issue?
A. Remove the port group manually
B. Migrate all virtual machines in the EPG-1 to different hypervisors
C. Remove the remaining EPGs from the VMM domain
D. Migrate all virtual machines in the EPG-1 to different port groups
View answer
Correct Answer: C
Question #17
An engineer is configuring boot from iSCSI on a Cisco UCS B-Series Blade Server, but the LUN fails to mount. Which action resolves the issue?
A. Statically configure the target information in the Boot Policy
B. Configure an MTU size of 9000 on the appliance port
C. Configure a QoS policy on the vNIC
D. Set a connection timeout value of 250 in the iSCSI Adapter Policy
View answer
Correct Answer: B
Question #18
A server fails to boot from the operating system after a RAID1 cluster migration. The RAID remains in an inactive state during and after a service profile association. Which action resolves the issue?
A. Configure the SAN boot target in the service profile
B. Configure the SAN boot target to any configuration mode
C. Use a predefined local disk configuration policy
D. Remove the local disk configuration policy
View answer
Correct Answer: C
Question #19
A switch is being downgraded to an earlier release because of a problem with the current release. After the switch is downgraded, it can no longer forward traffic. Which action resolves the issue?
A. Enable ISSD after the downgrade is complete
B. Roll back to the original image
C. Reload the switch
D. Shut and no shut the interfaces to the FEX
View answer
Correct Answer: S
Question #20
HSRP adjacency fails to form between Nexus7K-1 and Nexus7K-2. Which action should be taken to solve the problem?
A. Configure preempt on one of the switches in the HSRP group
B. Configure the same HSRP priority between the two switches
C. Configure the correct subnet mask on Nexus7K-1
D. Configure HSRP version 2 on Nexus7K-2
View answer
Correct Answer: D
Question #21
When an engineer inserts 8-Gb FC SFP port 15 on a Cisco UCS Fabric Interconnect, the port fails. What is a possible cause of the issue?
A. Port 15 is configured as an Ethernet port
B. Port 15 is configured for 4-Gb FC
C. Port 15 is missing a license
D. The polarity of the fiber cable is reversed
View answer
Correct Answer: C

View Answers after Submission

Please submit your email and WhatsApp to get the answers of questions.

Note: Please make sure your email ID and Whatsapp are valid so that you can get the correct exam results.

Email:
Whatsapp/phone number:


Copyright © 2024. Designer by SPOTO Official Website. All Rights Reserved.