DON'T WANT TO MISS A THING?

Certification Exam Passing Tips

Latest exam news and discount info

Curated and up-to-date by our experts

Yes, send me the newsletter

Pass Your CCNP 300-425 Exam with Practice Tests 2024 Updated, Cisco Enterprise Wireless Networks | SPOTO

Achieve success in your CCNP 300-425 exam with our updated practice tests tailored for Cisco Enterprise Wireless Networks. Our comprehensive exam materials cover crucial topics such as site surveys, wired and wireless infrastructure, mobility, and WLAN high availability, ensuring thorough preparation for the exam. Access the latest exam dumps to familiarize yourself with the most recent content and increase your confidence on exam day. With our mock exams and sample questions, you can simulate real exam scenarios and refine your skills effectively. Prepare efficiently with SPOTO's exam practice materials and elevate your readiness for the 300-425 ENWLSD certification. Start your journey towards becoming a Cisco Certified Specialist – Enterprise Wireless Design and pass your exam with flying colors.
Take other online exams
Question #1
Which CLI command does an engineer use to validate that the redundancy peer of a Stateful Switchover pair of controllers is up and connected?
A. rping
B. ping
C. eping
D. mping
View answer
Correct Answer: BC

View The Updated 300-425 Exam Questions

SPOTO Provides 100% Real 300-425 Exam Questions for You to Pass Your 300-425 Exam!

Get 300-425 Practice Test
Question #2
An engineer has deployed a group of APs in an auditorium and notices that the APs are showing high co-channel interference. Which profile can be used to adjust the parameters for these high-density APs?
A. QoS profile
B. AVC profile
C. RF profile
D. ISE profile
View answer
Correct Answer: B
Question #3
An engineer is designing a wireless deployment for a university auditorium. Which two features can be used to help deal with the issues introduced by high AP count? (Choose two.)
A. TSPEC
B. RXSOP
C. TPC
D. LSS
E. DFS
View answer
Correct Answer: CE
Question #4
A wireless deployment in a high-density environment is being used by vendors to process credit card payment transactions via handheld mobile scanners. The scanners are having problems roaming between access points in the environment. Which feature on the wireless controller should have been incorporated in the design?
A. RX SOP
B. 802
C. AP Heartbeat Timeout
D. Application Visibility Control
View answer
Correct Answer: B
Question #5
An engineer must speed up the reauthentication delays that are being experienced on the wireless infrastructure by deploying a key-caching mechanism. Which mechanism must be configured?
A. PEAP
B. FT
C. PMF
D. GTK-randomization
View answer
Correct Answer: D
Question #6
A wireless engineer is performing a post verification of a wireless network. Which two metrics does the engineer verify to ensure that the wireless network can support voice services? (Choose two.)
A. The coverage area must have a noise floor that does not exceed -87 dBm
B. The client device must have at least an -67 dBm RSSI
C. The rate of retransmitted packets must be 15 percent or below
D. The rate of retransmitted packets must be 20 percent or below
E. The client device must have at least an -65 dBm RSSI
View answer
Correct Answer: BE
Question #7
An engineer has successfully configured high availability and SSO using two Cisco 5508 Wireless LAN Controllers. The engineer can access the Active Primary WLC, but the Secondary Standby WLC is not accessible. Which two methods allow access to the standby unit? (Choose two.)
A. via the console connection
B. SSH to the redundancy management interface of the primary WLC
C. SSH to the service port interface
D. SSH to the virtual interface of the secondary WLC
E. SSH to the management interface of the primary WLC
View answer
Correct Answer: B
Question #8
An engineer has performed a predictive site survey for high-speed data and voice in an indoor office. What is the recommended data rate with -67 dBm signal level for optimal VoWLAN design?
A. 6 Mbps on 802
B. 24 Mbps on 802
C. 12 Mbps on 802
D. 24 Mbps on 802
View answer
Correct Answer: B
Question #9
What is the recommended cell overlap when designing a wireless network for Cisco Hyperlocation?
A. 20%
B. 30%
C. 40%
D. 50%
View answer
Correct Answer: AC
Question #10
An engineer must create data-link redundancy for the company’s Cisco Wireless LAN Controller. The engineer has decided to configure LAG-based redundancy instead of port-based redundancy. Which three features of LAG-based redundancy influenced this decision? (Choose three.)
A. Packets are always sent out on the same port they are received on
B. All interface traffic passes as long as one port is up
C. The same port has multiple untagged dynamics interfaces
D. Interface connection to two separate nonstacked switches is available
E. Full bandwidth of all links is available
F. Ports are grouped into multiple LAGs
View answer
Correct Answer: A
Question #11
A network engineer is configuring high availability on an access point. What is the maximum number of controllers that can be configured?
A. 1
B. 2
C. 3
D. 4
View answer
Correct Answer: ACD
Question #12
Clustering Cisco WLCs into a single RF group enables the RRM algorithms to scale beyond the capabilities of a single Cisco WLC. How many WLC and APs in an RF group can the controller software scale up to in WLC release 8.9 depending on the platform?
A. up to 20 WLCs and 1000 APs
B. up to 20 WLCs and 3000 APs
C. up to 20 WLCs and 4000 APs
D. up to 20 WLCs and 6000 APs
View answer
Correct Answer: A

View Answers after Submission

Please submit your email and WhatsApp to get the answers of questions.

Note: Please make sure your email ID and Whatsapp are valid so that you can get the correct exam results.

Email:
Whatsapp/phone number:


Copyright © 2024. Designer by SPOTO Official Website. All Rights Reserved.