DON'T WANT TO MISS A THING?

Certification Exam Passing Tips

Latest exam news and discount info

Curated and up-to-date by our experts

Yes, send me the newsletter

Optimize Your Vmware 3V0-42.20 Exam Prep, Practice Tests, Vmware Advanced Design NSX-T Data Center | SPOTO

Welcome to SPOTO, where you can optimize your Vmware 3V0-42.20 exam preparation with our comprehensive suite of resources! We provide everything you need to succeed, including practice tests, free test sessions, exam practice materials, online exam questions, exam questions, sample questions, exam dumps, exam questions and answers, mock exams, and exam materials. Our 2025 high-quality practice tests are specifically designed to help you succeed in passing the certification exam. The Advanced Design NSX-T Data Center 3.0 exam evaluates an individual's ability to gather customer requirements, risks, constraints, and assumptions. Candidates are then tasked with utilizing this information to make design recommendations for NSX-T Data Center 3.0 solutions. With our resources, you can optimize your exam preparation and increase your chances of success. Let SPOTO support you on your journey to certification achievement.
Take other online exams
Question #1
A Solutions Architect is assisting a service provider with designing an NSX-T Data Center solution for these environments: Virtual Data Center to Virtual Data Center connectivity Tenant workload on-boarding to Virtual Data Centers. These requirements must be met: scalability across 5 data centers all sites have a latency of 180ms MTU between sites is 1800 bandwidth is 100Mbps between sites multi-tenancy Which two selections should the Solutions Architect propose to the service provider? (Choose two.)
A. Configure Remote TEPs for stretching network services between Virtual Data Centers
B. Utilize SSL VPN for workloads on-boarding from on-premises to Virtual Data Centers
E. Utilize L2 VPN for workloads on-boarding from on-premises to Virtual Data Centers
View answer
Correct Answer: DE

View The Updated 3V0-42.20 Exam Questions

SPOTO Provides 100% Real 3V0-42.20 Exam Questions for You to Pass Your 3V0-42.20 Exam!

Get 3V0-42.20 Practice Test
Question #2
An architect is helping an organization with the Conceptual Design of an NSX-T Data Center solution. This information was gathered by the architect during the Discover Task of the Engagement Lifecycle: There are applications which use IPv6 addressing. Network administrators are not familiar with NSX-T Data Center solutions. Hosts can only be configured with two physical NICs. There is an existing management cluster to deploy the NSX-T components. Dynamic routing should be configured between the physical and
A. Network administrators are not familiar with NSX-T Data Center solutions
B. Dynamic routing should be configured between the physical and virtual network
View answer
Correct Answer: B
Question #3
What would an architect recommend to a customer that wants to extend management to an additional data center through Layer 2, but does not want to add additional NSX-T licensing? (Choose the best answer.)
A. Deploy a standalone NSX Controller
B. Deploy a standalone NSX Manager
View answer
Correct Answer: B
Question #4
An architect is helping an organization with the Conceptual Design of an NSX-T Data Center solution. This information was gathered by the architect during the Discover Task of the Engagement Lifecycle: Existing hardware will be used in any design proposal. Network bandwidth cannot be expanded. Which concept of the Discover Task do these items belong to? (Choose the best answer.)
A. constraint
B. requirement C
View answer
Correct Answer: D
Question #5
An architect is helping an organization with the Physical Design of an NSX-T Data Center solution. This information was gathered during a workshop: Migrating existing data center to KVM hosts. Redundancy and high availability are required. No component can be a single point of failure. Which selection should the architect recommend? (Choose the best answer.) A.Linux Bridge redundancy with Active/Active Mode and multiple pNICs with necessary binding B.Linux Bridge redundancy with Active/Active Mode and singl
An architect is helping an organization with the Physical Design of an NSX-T Data Center solution. This information was gathered during a workshop: Migrating existing data center to KVM hosts
View answer
Correct Answer: C
Question #6
Which two resources can be used by an NSX architect during the Assessment Phase? (Choose two.)
A. vRealize Network Insight B
E. application licensing
View answer
Correct Answer: AE
Question #7
A customer wants to place their NSX Managers in different subnets. Which would an architect recommend to support the request? (Choose the best answer.)
A. Use a load balancer
B. Use round-robin DNS
View answer
Correct Answer: D
Question #8
An architect is helping an organization with the Logical Design of an NSX-T Data Center solution. This information was gathered during the Assessment Phase: Data between two networks connected over a public network needs to be encrypted. Certificate authentication is required. Dynamic route learning is preferred. Which selection should the architect include in their design? (Choose the best answer.)
A. Deploy a Tier-0 gateway in Active/Standby mode
B. Deploy a Tier-0 gateway in Active/Active mode
View answer
Correct Answer: C
Question #9
An architect is helping an organization with the Conceptual Design of an NSX-T Data Center solution. Which risk is documented by an architect? (Choose the best answer.)
A. The security team has a firewall communication matrix documented
B. The team is not trained for NSX-T but have a very strong experience with vSphere
View answer
Correct Answer: B
Question #10
An architect is helping an organization with the Logical Design of a Layer 2 bridging solution. This information was gathered during the Assessment Phase: Workloads are running on ESXi hosts. Workloads are running on KVM hosts. Workloads on hypervisors should use bridging services. VLAN 50 is used for Tier-0 uplink connectivity. Which selection should the architect include in their design? (Choose the best answer.)
A. Create an NSX Edge Bridge Cluster and configure the bridging profile with VLAN 60
B. Create an NSX Edge Bridge Cluster and configure the bridging profile with VLAN 50
View answer
Correct Answer: B
Question #11
An architect is helping an organization with the Physical Design of an NSX-T Data Center solution. This information was gathered during a workshop: Current hypervisor of choice is KVM. Cost reduction is important. Which two selections should the architect recommend to the organization? (Choose two.)
A. Deploy Edge VM Nodes using ISO
B. Deploy NSX Manager using OVF
E. Deploy Edge VM Nodes on KVM
View answer
Correct Answer: CD
Question #12
A customer wants to use ECMP to provide additional throughput and availability for their critical business applications. Some applications require load balancing for scale and availability. Which two Edge design choices can an architect present to the customer? (Choose two.)
A. Create a Tier-0 gateway in Active/Standby mode and a Tier-1 gateway in Active/Standby mode
B. Configure ECMP and Load Balancing on the Tier-0 gateway
E. Configure ECMP on the Tier-0 gateway and Load Balancing on the Tier-1 gateway
View answer
Correct Answer: A
Question #13
According to the Discover Task of the Engagement Lifecycle, which statement would be classified as a risk? (Choose the best answer.)
A. Enough power and cooling capacity is available in each rack in the data center
B. To retain certification to provide financial services to end customers, PCI-DSS audits need to be passed
View answer
Correct Answer: D
Question #14
An architect is designing a solution for containerization. The solution will include high availability and security using NSX-T Data Center. The architect plans to provide a basic required components list in the Logical Design. Which solution should the architect recommend? (Choose the best answer.)
A. 3 NSX Managers, 3 virtual NSX Edges, two Tier-0 gateways in Active/Standby, BGP configuration
B. 2 NSX Managers, 2 virtual NSX Edges, one Tier-0 gateway, BGP configuration and a static route C
View answer
Correct Answer: A
Question #15
An architect is helping an organization with the Physical Design of an NSX-T Data Center solution. This information was gathered during a workshop: The company will use a Leaf and Spine physical network architecture with Layer 3 gateways for top of rack switches. The company is planning to deploy 120 ESX hosts across 10 racks. There will be a total of a 12 clusters where each cluster has one host per rack. What should the architect recommend to allow applications to run on any host in the cluster? (Choose t
A. Deploy all application networks on NSX segments
B. Deploy an L2 VPN to allow the networks to extend to each host
View answer
Correct Answer: D
Question #16
An architect is helping an organization with the Physical Design of an NSX-T Data Center solution. This information was gathered during a workshop about ESXi Host networking: A total of 50 ESXi hosts to be configured as Transport Nodes. All ESXi hosts have a dedicated 2 × Intel 10Gbps Physical Network adapter for the Overlay Traffic. To achieve low latency, high throughput, redundancy, and performance, which two NIC teaming policies should the architect recommend? (Choose two.)
A. Load Balance Source MAC
B. Load Balance Port ID C
E. Failover Order
View answer
Correct Answer: DE

View The Updated Vmware Exam Questions

SPOTO Provides 100% Real Vmware Exam Questions for You to Pass Your Vmware Exam!

Get Vmware Practice Test

View Answers after Submission

Please submit your email and WhatsApp to get the answers of questions.

Note: Please make sure your email ID and Whatsapp are valid so that you can get the correct exam results.

Email:
Whatsapp/phone number:


Copyright © 2024. Designer by SPOTO Official Website. All Rights Reserved.