DON'T WANT TO MISS A THING?

Certification Exam Passing Tips

Latest exam news and discount info

Curated and up-to-date by our experts

Yes, send me the newsletter

Master 500-220 Exams with Exam Questions & Study Materials, Cisco 500-220 Certification Exam | SPOTO

Prepare effectively for the Cisco 500-220 certification exam with our comprehensive collection of exam questions and study materials at SPOTO. The ECMS 500-220 exam, designed for Cisco Meraki Solutions Specialists, assesses your ability to engineer Meraki solutions. Covering areas like cloud management, design, implementation, monitoring, and troubleshooting, this 90-minute exam demands a deep understanding of Cisco Meraki technologies. Our practice tests, exam dumps, and exam questions with answers provide a solid foundation for your exam preparation. Access free tests and sample questions to gauge your readiness. Utilize our exam simulator for realistic exam practice. With SPOTO's exam materials and answers, mastering the 500-220 exam becomes achievable.
Take other online exams
Question #1
This Dashboard organization uses Co-Termination licensing model. What happens when an additional seven APs are claimed on this network without adding licenses?
A. All APs immediately stop functioning
B. All network devices stop functioning in 30 days
C. One AP Immediately stops functioning
D. All APs stop functioning in 30 days
View answer
Correct Answer: C

View The Updated 500-220 Exam Questions

SPOTO Provides 100% Real 500-220 Exam Questions for You to Pass Your 500-220 Exam!

Get 500-220 Practice Test
Question #2
A customer requires a hub-and-spoke Auto VPN deployment with two NAT-mode hubs with dual uplink connections and 50 remote sites with a single uplink connection. How many tunnels does each hub need to support?
A. 52
B. 54
C. 100
D. 104
View answer
Correct Answer: C
Question #3
Which two actions are required to optimize load balancing asymmetrically with a 4:1 ratio between links? (Choose two.)
A. Change the primary uplink to "none"
B. Add an internet traffic preference that defines the load-balancing ratio as 4:1
C. Enable load balancing
D. Set the speed of the cellular uplink to zero
E. Change the assigned speeds of WAN 1 and WAN 2 so that the ratio is 4:1
View answer
Correct Answer: BC
Question #4
Which design recommendation should be considered?
A. A 25-percent throughput loss occurs for every hop
B. A 25-percent throughput loss occurs for every hop
C. A 50-percent throughput loss occurs for every hop
D. A 50-percent throughput loss occurs for every hop
View answer
Correct Answer: BC
Question #5
When wireless SSIDs are configured in Dashboard, which setting on the Access Control page affects the ability of a 2.4 GHz only client device from associating to the WLAN for the first time?
A. Content filtering
B. Bridge mode
C. 802
D. Dual band operating with Band Steering
View answer
Correct Answer: A
Question #6
Assuming this MX has established a full tunnel with its VPN peer, how will the MX route the WebEx traffic?
A. WebEx traffic will prefer WAN 2 as long as it meets the thresholds in the “Conf” performance class
B. WebEx traffic will prefer WAN 1 as it is the primary uplink
C. WebEx traffic will prefer WAN 2 as long as it is up
D. WebEx traffic will be load-balanced between both active WAN links
View answer
Correct Answer: B
Question #7
Which configuration step is necessary when automatic updating is required of iOS apps provisioned through Systems Manager that are found in the App Store?
A. No configuration step is necessary; automatic updating is the default behavior
B. Configure automatic updating of iOS devices in the Meraki installed profile
C. Create a security policy that enables automatic updates
D. Create a profile with automatic update enabled and apply it to iOS devices
View answer
Correct Answer: A
Question #8
For an AP that displays this alert, which network access control method must be in use?
A. preshared key
B. WPA2-enterprise with my RADIUS server
C. splash page with my RADIUS server
D. MAC-based access control with RADIUS server
View answer
Correct Answer: C
Question #9
When an SSID is configured with Sign-On Splash page enabled, which two settings must be configured for unauthenticated clients to have full network access and not be allow listed? (Choose two.)
A. Controller disconnection behavior
B. Captive Portal strength
C. Simultaneous logins
D. Firewall & traffic shaping
E. RADIUS for splash page settings
View answer
Correct Answer: AB
Question #10
What does the MX Security Appliance send to determine whether VPN traffic exceeds the configured latency threshold in the VoIP custom performance class?
A. 1000-byte TCP probes every second, through VPN tunnels that are established over the primary WAN link
B. 100-byte UDP probes every second, through VPN tunnels that are established over every WAN link
C. 100-byte UDP probes every second, through VPN tunnels that are established over the primary WAN link
D. 1000-byte TCP probes every second, through VPN tunnels that are established over every WAN link
View answer
Correct Answer: AB
Question #11
What is an advantage of implementing inter-VLAN routing on an MX Security Appliance rather than performing inter-VLAN routing on an MS Series Switch?
A. The MX appliance performs IDS/IPS for inter-VLAN traffic
B. The MX appliance performs AMP for inter-VLAN traffic
C. The MX appliance performs data encryption for inter-VLAN traffic
D. The MX appliance performs content filtering for inter-VLAN traffic
View answer
Correct Answer: A
Question #12
Which two Systems Manager Live tools are available only for Apple Macs and Windows PCs and cannot be used on iOS or Android mobile devices? (Choose two.)
A. OS updates
B. Send notification
C. Selective wipe
D. Screenshot
E. Remote Desktop
View answer
Correct Answer: D
Question #13
A packet arrives on the VPN concentrator with source IP 10.168.70.3 and destined for IP 10.116.32.4. What is the next hop for the packet, based on this concentrator routing table?
A. The concentrator gateway (10
B. Not enough detail is available to determine the next hop
C. The packet is stopped
D. The Auto VPN peer “Store 1532 – appliance” is the next hop
View answer
Correct Answer: BC
Question #14
What is the minimal Cisco Meraki Insight licensing requirement?
A. A single Meraki Insight license must be configured on network A to gain Web App Health visibility on network
B. B
B.
C. A single Meraki Insight license must be configured on network A, and a single license must be configured on network B, to gain Web App Health visibility on network
B.
D. Two Meraki Insight licenses must be configured on network A to gain Web App Health visibility on network
B.
E. Two Meraki Insight licenses must be configured on network A and a single license must be configured on network B, to gain Web App Health visibility on network
B.
View answer
Correct Answer: A
Question #15
A Cisco Meraki MV camera is monitoring an office and its field of vision currently captures work desks and employee computer screens. However, recording employee computer screens is prohibited by local regulation. Which feature in Dashboard can be used to preserve the current position of the camera while also meeting regulation requirements?
A. zone exclusion
B. privacy window
C. area or interest
D. sensor crop
E. restricted mode
View answer
Correct Answer: B
Question #16
During a Meraki AP deployment, the default SSID that the exhibit shows is broadcast. What causes this behavior?
A. An AP does not have a wired connection to the network
B. An AP cannot connect to the default gateway
C. An AP has never connected to the Meraki Cloud Controller
D. An AP has Site Survey mode enabled
View answer
Correct Answer: S
Question #17
What are the Loss and Average Latency statistics based on?
A. responses that the MX appliance receives on the connectivity-testing hostnames on the Insight > Web App Health page
B. responses that the MX appliance receives on the connectivity-testing IP addresses on the Security & SD-WAN > Firewall page
C. responses that the MX appliance receives on the connectivity-testing IP address that is configured on the Security & SD-WAN > SD-WAN & Traffic Shaping pageD
View answer
Correct Answer: A
Question #18
Which IDS/IPS mode is the MX Security Appliance configured for?
A. quarantine
B. prevention
C. detection
D. blocking
View answer
Correct Answer: B
Question #19
Which Cisco Meraki product must be deployed in addition to Systems Manager so that Systems Manager Sentry enrollment can be used?
A. MS Switch
B. Meraki Insight
C. MR Access Point
D. MV Smart Camera
View answer
Correct Answer: D
Question #20
What are two outcomes reflected in the Web App Health application? (Choose two.)
A. Users on both networks may be experiencing issues when attempting to reach Google
B. Network #1 could not load Google because of a remote server issue
C. Network #2 had better application performance than Network #1
D. Network #2 could not load Google because of a local client misconfiguration
E. Neither network recorded any server-side performance issues
View answer
Correct Answer: CE

View Answers after Submission

Please submit your email and WhatsApp to get the answers of questions.

Note: Please make sure your email ID and Whatsapp are valid so that you can get the correct exam results.

Email:
Whatsapp/phone number:


Copyright © 2024. Designer by SPOTO Official Website. All Rights Reserved.