Fortinet Exam Preparation with Latest NSE5

Question #1

View the following exhibit.What is the purpose of setting ADOM Mode to Advanced?

A. he setting allows automatic updates to the policy package configuration for a managed device

B. he setting enables the ADOMs feature on FortiManager

C. his setting allows you to assign different VDOMs from the same FortiGate to different ADOMs

D. he setting disables concurrent ADOM access and adds ADOM locking

View answer

Correct Answer: C

Question #2

An administrator would like to review, approve, or reject all the firewall policy changes made by the junior administrators.How should the Workspace mode be configured on FortiManager?

A. Set to workflow and use the ADOM locking feature

B. Set to read/write and use the policy locking feature

C. Set to normal and use the policy locking feature

D. Set to disable and use the policy locking feature

View answer

Correct Answer: A

Question #3

View the following exhibit, which shows the Download Import Report: Why it is failing to import firewall policy ID 2?

A. he address object used in policy ID 2 already exist in ADON database with any as interface association and conflicts with address object interface association locally on the FortiGate

B. olicy ID 2 is configured from interface any to port6 FortiManager rejects to import this policy because any interface does not exist on FortiManager

C. olicy ID 2 does not have ADOM Interface mapping configured on FortiManager

D. olicy ID 2 for this managed FortiGate already exists on FortiManager in policy package named Remote-FortiGate

View answer

Correct Answer: A

Question #4

Which two settings must be configured for SD-WAN Central Management? (Choose two.)

A. ortiManager will not allow the administrator to delete a referenced address object

B. ortiManager will disable the status of the referenced firewall policy

C. ortiManager will replace the deleted address object with the none address object in the referencedfirewall policy

D. ortiManager will replace the deleted address object with all address object in the referenced firewall policy

View answer

Correct Answer: AC

Question #5

View the following exhibit. Given the configurations shown in the exhibit, what can you conclude from the installation targets in the Install On column?

A. he Install On column value represents successful installation on the managed devices

B. olicy seq#3 will be installed on all managed devices and VDOMs that are listed under Installation Targets

C. olicy seq#3 will be installed on the Trainer[NAT] VDOM only

D. olicy seq#3 will be not installed on any managed device

View answer

Correct Answer: B

Question #6

What is the purpose of the Policy Check feature on FortiManager?

A. o find and provide recommendation to combine multiple separate policy packages into one common policy package

B. o find and merge duplicate policies in the policy package

C. o find and provide recommendation for optimizing policies in a policy package

D. o find and delete disabled firewall policies in the policy package

View answer

Correct Answer: C

Question #7

View the following exhibit.An administrator is importing a new device to FortiManager and has selected the shown options. What will happen if the administrator makes the changes and installs the modified policy package on this managed FortiGate?

A. he unused objects that are not tied to the firewall policies will be installed on FortiGate

B. he unused objects that are not tied to the firewall policies will remain as read-only locally on FortiGate

C. he unused objects that are not tied to the firewall policies locally on FortiGate will be deleted

D. he unused objects that are not tied to the firewall policies in policy package will be deleted from theFortiManager database

View answer

Correct Answer: C

Question #8

Refer to the exhibit.If both FortiManager and FortiGate are behind the NAT devices, what are the two expected results? (Choose two.)

A. FortiGate can announce itself to FortiManager only if the FortiManager non-NATed IP address is configured on FortiGate under central management

B. If the FGFM tunnel is torn down, FortiManager will try to re-establish the FGFM tunnel

C. FortiGate is discovered by FortiManager through the FortiGate NATed IP address

D. During discovery, the FortiManager NATed IP address is not set by default on FortiGate

View answer

Correct Answer: CD

Question #9

Which two items are included in the FortiManager backup? (Choose two.)

A. FortiGuard database

B. Firmware images

C. Flash configuration

D. All devices

View answer

Correct Answer: CD

Question #10

Refer to the exhibit.

A. Policy ID 2 will not be installed

B. Policy ID 2 is installed without a source device

C. Policy ID 2 is installed without a source address

D. Policy ID 2 is installed in the disabled state

View answer

Correct Answer: B

Question #11

In the event that the primary FortiManager fails, which of the following actions must be performed to return the FortiManager HA to a working state?

A. econdary device with highest priority will automatically be promoted to the primary role, and manually reconfigure all other secondary devices to point to the new primary device

B. eboot one of the secondary devices to promote it automatically to the primary role, and reconfigure all other secondary devices to point to the new primary device

C. anually promote one of the secondary devices to the primary role, and reconfigure all other secondary devices to point to the new primary device

D. ortiManager HA state transition is transparent to administrators and does not require any reconfiguration

View answer

Correct Answer: C

Question #12

View the following exhibit.

A. Policy ID 2 is installed without a source address

B. Policy ID 2 will not be installed

C. Policy ID 2 is installed in disabled state

D. Policy ID 2 is installed without a source device

View answer

Correct Answer: D

Question #13

Refer to the exhibit.How will FortiManager try to get updates for antivirus and IPS?

A. rom the list of configured override servers that have the ability to fall back to public FDN servers

B. rom the configured override server list only

C. rom public FDNI servers with highest index number only

D. rom the default server fds1

View answer

Correct Answer: A

Question #14

View the following exhibit:

A. The unused objects that are not tied to the firewall policies will be installed on FortiGate

B. The unused objects that are not tied to the firewall policies will remain as read-only locally on FortiGate

C. The unused objects that are not tied to the firewall policies in policy package will be deleted from the FortiManager database

D. The unused objects that are not tied to the firewall policies locally on FortiGate will be deleted

View answer

Correct Answer: A

Question #15

An administrator wants to delete an address object that is currently referenced in a firewall policy. What can the administrator expect to happen?

A. he unused objects that are not tied to the firewall policies locally on FortiGate will be deleted

B. he unused objects that are not tied to the firewall policies in the policy package will be deleted from the FortiManager database

C. he unused objects that are not tied to the firewall policies will remain as read-only locally on FortiGate

D. he unused objects that are not tied to the firewall policies will be installed on FortiGate

View answer

Correct Answer: A

Question #16

Refer to the exhibit.Review the Download Import Report.Why is it failing to import firewall policy ID 1?

A. Policy ID 1 for this managed FortiGate already exists on FortiManager in the policy package named Remote-FortiGate

B. Policy ID 1 is configured from the interface any to port6

C. Policy ID 1 does not have the ADOM Interface mapping configured on FortiManager

D. The address object used in policy ID 1 already exists in the ADOM database with any as the interface association, and conflicts with the address object interface association locally on FortiGate

View answer

Correct Answer: D

Question #17

Refer to the exhibits. Exhibit one. Exhibit two. An administrator created a new system template named Training with two new DNS addresses on FortiManager. During the installation preview stage, the administrator notices that many unset commands need to be pushed.What can be the main reason for these unset commands?

A. he DNS addresses in the default system settings are the same as the Training system template

B. he Training system template has other default settings

C. he ADOM is locked by another administrator

D. he Training system template does not have assigned devices

View answer

Correct Answer: B

Question #18

Which three settings are the factory default settings on FortiManager? (Choose three.)

A. ortiManager will reboot

B. ortiManager will send the logging configuration to the managed devices so the managed devices will start sending logs to FortiManager

C. ortiManager will enable ADOMs automatically to collect logs from non-FortiGate devices

D. ortiManager can be used only as a logging device

View answer

Correct Answer: ACE

Question #19

View the following exhibit:Which two statements are true if the script is executed using the Remote FortiGate Directly (via CLI) option? (Choose two.)

A. rainer is not a part of workflow approval group

B. rainer does not have full rights over this ADOM

C. rainer must close Student's workflow session before approving the request

D. tudent, who submitted the workflow session, must first self-approve the request

View answer

Correct Answer: BC

Question #20

In addition to the default ADOMs, an administrator has created a new ADOM named Training for FortiGate devices. The administrator sent a device registration to FortiManager from a remote FortiGate. Which one of the following statements is true?

A. he FortiGate will be added automatically to the default ADOM named FortiGate

B. he FortiGate will be automatically added to the Training ADOM

C. y default, the unregistered FortiGate will appear in the root ADOM

D. he FortiManager administrator must add the unregistered device manually to the unregistered device manually to the Training ADOM using the Add Device wizard

View answer

Correct Answer: C

Question #21

An administrator has assigned a global policy package to a new ADOM called ADOM1. What will happen if the administrator tries to create a new policy package in ADOM1?

A. hen creating a new policy package, the administrator can select the option to assign the global policypackage to the new policy package

B. hen a new policy package is created, the administrator needs to reapply the global policy package toADOM1

C. hen a new policy package is created, the administrator must assign the global policy package from the global ADOM

D. hen the new policy package is created, FortiManager automatically assigns the global policy package to the new policy package

View answer

Correct Answer: D

Question #22

View the following exhibit.What of the following statements are true regarding the output? (Choose two.)

A. ort2

B. irtual-wan-link

C. ort1

D. uto-discovery

View answer

Correct Answer: BD

Question #23

View the following exhibit:How will FortiManager try to get updates for antivirus and IPS?

A. rom the list of configured override servers with ability to fall back to public FDN servers

B. rom the configured override server list only

C. rom the default server fdsl

D. rom public FDNI server with highest index number only

View answer

Correct Answer: A

Question #24

What is the purpose of ADOM revisions?

A. To create System Checkpoints for the FortiManager configuration

B. To save the current state of the whole ADOM

C. To save the current state of all policy packages and objects for an ADOM

D. To revert individual policy packages and device-level settings for a managed FortiGate by reverting to a specific ADOM revision

View answer

Correct Answer: C

Question #25

Refer to the exhibit.Given the configuration shown in the exhibit, which two statements are true? (Choose two.)

A. An administrator can also lock the Local-FortiGate-1 policy package

B. The FortiManager ADOM is locked by the administrator

C. The FortiManager ADOM mode is set to Normal

D. FortiManager is in workflow mode

View answer

Correct Answer: AD

Question #26

Which two conditions trigger FortiManager to create a new revision history? (Choose two.)

A. IP and IP Pools

B. irewall policies

C. ecurity profiles

D. outing

View answer

Correct Answer: BC

Question #27

View the following exhibit:

A. You must install these changes using Install Wizard

B. FortiGate will auto-update the FortiManager"?s device-level database

C. FortiManager will create a new revision history

D. FortiManager provides a preview of CLI commands before executing this script on a managed FortiGate

View answer

Correct Answer: BD

Question #28

An administrator would like to create an SD-WAN using central management in the Training ADOM. To create an SD-WAN using central management, which two steps must be completed? (Choose two.)

A. olicy ID 2 is installed without a source address

B. olicy ID 2 will not be installed

C. olicy ID 2 is installed in disabled state

D. olicy ID 2 is installed without a source device

View answer

Correct Answer: BD

Question #29

An administrator has enabled Service Access on FortiManager. What is the purpose of Service Access on the FortiManager interface?

A. Allows FortiManager to run real-time debugs on the managed devices

B. Allows FortiManager to respond to requests for FortiGuard services from FortiGate devices

C. Allows FortiManager to automatically configure a default route

D. Allows FortiManager to download IPS packages

View answer

Correct Answer: B

Question #30

An administrator configured a new firewall policy on FortiManager and has yet pushed to the managed FortiGate. In which database will the configuration be saved?

A. Configuration-level database

B. Device-level database

C. ADOM-level database

D. Revision history database

View answer

Correct Answer: B

Question #31

In addition to the default ADOMs, an administrator has created a new ADOM named Training for FortiGate devices only. The administrator authorized the FortiGate device on FortiManager using the Fortinet Security Fabric.Given the administrator’s actions, which statement correctly describes the expected result?

A. The FortiManager administrator must add the authorized device to the Training ADOM using the Add Device wizard only

B. The authorized FortiGate will appear in the root ADOM

C. The authorized FortiGate can be added to the Training ADOM using FortiGate Fabric Connectors

D. The authorized FortiGate will be automatically added to the Training ADOM

View answer

Correct Answer: B

Question #32

Refer to the exhibit.An administrator is about to add the FortiGate device to FortiManager using the discovery process. FortiManager is operating behind a NAT device, and the administrator configured the FortiManager NATed IP address under the FortiManager system administration settings.What is the expected result?

A. During discovery, FortiManager sets both the FortiManager NATed IP address and NAT device IP address on FortiGate

B. During discovery, FortiManager uses only the FortiGate serial number to establish the connection

C. During discovery, FortiManager sets the FortiManager NATed IP address on FortiGate

D. During discovery, FortiManager sets the NATed device IP address on FortiGate

View answer

Correct Answer: C

Question #33

Which of the following conditions trigger FortiManager to create a new revision history? (Choose two.)

A. hen creating a new policy package, the administrator can select the option to assign the global policy package to the new policy package

B. hen a new policy package is created, the administrator needs to reapply the global policy package to ADOM1

C. hen a new policy package is created, the administrator must assign the global policy package from the global ADOM

D. hen the new policy package is created, FortiManager automatically assigns the global policy package to the new policy package

View answer

Correct Answer: CD

Question #34

What does a policy package status of Conflict indicate?

A. The policy package reports inconsistencies and conflicts during a Policy Consistency Check

B. The policy package does not have a FortiGate as the installation target

C. The policy package configuration has been changed on both FortiManager and the managed device independently

D. The policy configuration has never been imported after a device was registered on FortiManager

View answer

Correct Answer: A

Question #35

In the event that the primary FortiManager fails, which of the following actions must be performed to return the FortiManager HA to a working state?

A. econdary device with highest priority will automatically be promoted to the primary role, and manuallyreconfigure all other secondary devices to point to the new primary device

B. eboot one of the secondary devices to promote it automatically to the primary role, and reconfigure all other secondary devices to point to the new primary device

C. anually promote one of the secondary devices to the primary role, and reconfigure all other secondary devices to point to the new primary device

D. ortiManager HA state transition is transparent to administrators and does not require any reconfiguration

View answer

Correct Answer: C

Question #36

Refer to the exhibit.You are using the Quick Install option to install configuration changes on the managed FortiGate. Which two statements correctly describe the result? (Choose two.)

A. rom the list of configured override servers with ability to fall back to public FDN servers

B. rom the configured override server list only

C. rom the default server fdsl

D. rom public FDNI server with highest index number only

View answer

Correct Answer: BC

Question #37

What is the purpose of the ADOM revisions?

A. To revert individual policy packages and device-level settings for a managed FortiGate by reverting to a specific ADOM revision

B. To create System Checkpoints for the FortiManager configuration

C. To save the current state of all policy packages and objects for an ADOM

D. To save the current state of the whole ADOM

View answer

Correct Answer: C

Question #38

Refer to the exhibit.What can you conclude from the failed installation log shown in the exhibit?

A. Policy ID 2 is installed in the disabled state

B. Policy ID 2 is installed without a source address

C. Policy ID 2 is installed without the remote user student

D. Policy ID 2 will not be installed

View answer

Correct Answer: C

Question #39

Refer to the exhibit.Which statement about the object named ALL is true?

A. FortiManager updated the object ALL using the FortiGate value

B. FortiManager updated the object ALL using the FortiManager value in its database

C. FortiManager created the object ALL as a unique entity in its database, which can be only used by this managed FortiGate

D. FortiManager installed the object ALL with the updated value

View answer

Correct Answer: B

Question #40

An administrator has added all the devices in a Security Fabric group to FortiManager.How does the administrator identify the root FortiGate?

A. By a dollar symbol ($) at the end of the device name

B. By an at symbol (@) at the end of the device name

C. By a question mark(?) at the end of the device name

D. By an Asterisk (*) at the end of the device name

View answer

Correct Answer: D

Question #41

An administrator removed one of the secondary devices from the FortiManager HA cluster. What change will be pushed by the primary FortiManager device?

A. FortiManager will remove the secondary device"?s IP address and serial number immediately from the central management configuration of managed devices

B. FortiManager will remove the secondary device"?s serial number immediately from the central management configuration of managed devices

C. FortiManager will remove the secondary device"?s IP address immediately from the central management configuration of managed devices

D. FortiManager will remove the secondary device"?s IP address from the server-list configuration central management configuration of managed devices

View answer

Correct Answer: A

Question #42

An administrator would like to create an SD-WAN using central management in the Training ADOM.To create an SD-WAN using central management, which two steps must be completed? (Choose two.)

A. Remove all the interface references for policies that will be a part of SD-WAN member interfaces

B. Configure and install the SD-WAN firewall policy and SD-WAN static route before installing the SD-WAN template settings

C. Enable SD-WAN central management in the Training ADOM

D. Specify a gateway address when you create a default SD-WAN static route

View answer

Correct Answer: AC

Question #43

Which two settings must be configured for SD-WAN Central Management? (Choose two.)

A. The first step in creating an SD-WAN using FortiManager is to create two SD-WAN firewall policies

B. You must create multiple SD-WAN interfaces per VDOM

C. When you configure an SD-WAN, you must specify at least two member interfaces

D. SD-WAN must be enabled on a per-ADOM basis

View answer

Correct Answer: CD

Question #44

Which two statements about the scheduled backup of FortiManager are true? (Choose two.)

A. he DNS addresses in the default system settings are the same as the Training system template

B. he Training system template has other default settings

C. he ADOM is locked by another administrator

D. he Training system template does not have assigned devices

View answer

Correct Answer: AD

Question #45

When an installation is performed from FortiManager, what is the recovery logic used between FortiManager and FortiGate for an FGFM tunnel?

A. ny pending device settings will be installed automatically

B. ny unused objects from a previous ADOM are moved to the new ADOM automatically

C. he shared policy package will not be moved to the new ADOM

D. olicy packages will be imported into the new ADOM automaticallyD

View answer

Correct Answer: A

Question #46

Refer to the following exhibit:Which of the following statements are true based on this configuration? (Choose two.)

A. The same administrator can lock more than one ADOM at the same time

B. Ungraceful closed sessions will keep the ADOM in a locked state until the administrator session times out

C. Unlocking an ADOM will submit configuration changes automatically to the approval administrator

D. Unlocking an ADOM will install configuration automatically on managed devices

View answer

Correct Answer: AB

Question #47

View the following exhibit:

A. Policy seq

B. Policy seq

C. Policy seq

D. The Install On column value represents successful installations on the managed devices

View answer

Correct Answer: B

Question #48

An administrator with the Super_User profile is unable to log in to FortiManager because of an authentication failure message.Which troubleshooting step should you take to resolve the issue?

A. Make sure the administrator IP address is part of the trusted hosts

B. Make sure ADOMs are enabled and the administrator has access to the Global ADOM

C. Make sure FortiManager Access is enabled in the administrator profile

D. Make sure Offline Mode is disabled

View answer

Correct Answer: A

Question #49

Refer to the exhibit.

A. It allows FortiGate to unset central management settings

B. It allows FortiGate to reboot and recover the previous configuration from its configuration file

C. It allows the FortiManager to revert and install a previous configuration revision on the managed FortiGate

D. It allows FortiGate to reboot and restore a previously working firmware image

View answer

Correct Answer: B

Question #50

Which two statements about the scheduled backup of FortiManager are true? (Choose two.)

A. he FortiGate will be added automatically to the default ADOM named FortiGate

B. he FortiGate will be automatically added to the Training ADOM

C. y default, the unregistered FortiGate will appear in the root ADOM

D. he FortiManager administrator must add the unregistered device manually to the unregistered devicemanually to the Training ADOM using the Add Device wizard

View answer

Correct Answer: BC

Question #51

Refer to the exhibits.An administrator created a new system template named Training with two new DNS addresses on FortiManager. During the installation preview stage, the administrator notices that many unset commands need to be pushed.What could be the main reason for these unset commands?

A. The DNS addresses in the default system settings are the same as the Training system template

B. The ADOM is locked by another administrator

C. The Training system template does not have assigned devices

D. The Training system template has other default settings

View answer

Correct Answer: D

Question #52

An administrator would like to create an SD-WAN default static route for a newly created SD-WAN using the FortiManager GUI. Both port1 and port2 are part of the SD-WAN member interfaces.Which interface must the administrator select in the static route device drop-down list?

A. he address object used in policy ID 2 already exist in ADON database with any as interface association and conflicts with address object interface association locally on the FortiGate

B. olicy ID 2 is configured from interface any to port6 FortiManager rejects to import this policy because any interface does not exist on FortiManager

C. olicy ID 2 does not have ADOM Interface mapping configured on FortiManager

D. olicy ID 2 for this managed FortiGate already exists on FortiManager in policy package named Remote-FortiGate

View answer

Correct Answer: B

Question #53

In the event that the primary FortiManager fails, which action must be performed to return the FortiManager HA to a working state?

A. The secondary device with highest priority will automatically be promoted to the primary role, and you must manually reconfigure all other secondary devices to point to the new primary device

B. Manually promote one of the secondary devices to the primary role, and reconfigure all other secondary devices to point to the new primary device

C. Reboot one of the secondary devices to promote it automatically to the primary role, and reconfigure all other secondary devices to point to the new primary device

D. FortiManager HA state transition is transparent to administrators and does not require any reconfiguration

View answer

Correct Answer: B

Question #54

Refer to the exhibit. Given the configuration shown in the exhibit, which two statements are true? (Choose two.)

A. ortiManager updated the object ALL using the FortiGate value in its database

B. ortiManager installed the object ALL with the updated value

C. ortiManager created the object ALL as a unique entity in its database, which can be only used by this managed FortiGate

D. ortiManager updated the object ALL using the FortiManager value in its database

View answer

Correct Answer: BC

Question #55

Which two statements regarding device management on FortiManager are true? (Choose two.)

A. FortiGate devices in an HA cluster are counted as a single device

B. FortiGate devices in transparent mode configurations are not counted toward the device count on FortiManager

C. The maximum number of managed devices for each ADOM is 500

D. FortiGate devices in an HA cluster that has five VDOMs are counted as five separate devices

View answer

Correct Answer: AD

Question #56

An administrator run the reload failure command: diagnose test deploymanager reload config on FortiManager. What does this command do?

A. t downloads the latest configuration from the specified FortiGate and performs a reload operation on the device database

B. t installs the latest configuration on the specified FortiGate and update the revision history database

C. t compares and provides differences in configuration on FortiManager with the current running configuration of the specified FortiGate

D. t installs the provisioning template configuration on the specified FortiGate

View answer

Correct Answer: A

Question #57

Refer to the exhibit.An administrator would like to create three ADOMs on FortiManager with different access levels based on departments.What two conclusions can you draw from the design shown in the exhibit? (Choose two.)

A. Admin A can access VDOM2 and VDOM3 with the super user profile

B. The FortiManager policies and objects database can be shared between the Financial and HR ADOMs

C. The administrator must set the FortiManager ADOM mode to Advanced

D. The administrator must configure FortiManager in workspace mode

View answer

Correct Answer: BC

Question #58

View the following exhibit. An administrator is importing a new device to FortiManager and has selected the shown options. What will happen if the administrator makes the changes and installs the modified policy package on this managed FortiGate?

A. he unused objects that are not tied to the firewall policies will be installed on FortiGate

B. he unused objects that are not tied to the firewall policies will remain as read-only locally on FortiGate

C. he unused objects that are not tied to the firewall policies locally on FortiGate will be deleted

D. he unused objects that are not tied to the firewall policies in policy package will be deleted from the FortiManager database

View answer

Correct Answer: C

Question #59

Which of the following statements are true regarding ADOM revisions? (Choose two.)

A. ADOM revisions can significantly increase the size of the configuration backups

B. ADOM revisions can save the current size of the whole ADOM

C. ADOM revisions can create System Checkpoints for the FortiManager configuration

D. ADOM revisions can save the current state of all policy packages and objects for an ADOM

View answer

Correct Answer: AD

Question #60

An administrator is in the process of moving the system template profile between ADOMs by running the following command: execute fmprofile import-profile ADOM2 3547 /tmp/myfileWhere does the administrator import the file from?

A. File system

B. ADOM1

C. ADOM2 object database

D. ADOM2

View answer

Correct Answer: A

Question #61

Refer to the exhibit.

A. During discovery, the FortiManager NATed IP address is not set by default on FortiGate

B. FortiGate can announce itself to FortiManager only if the FortiManager non-NATed IP address is configured on FortiGate under central management

C. FortiGate is discovered by FortiManager through the FortiGate NATed IP address

D. If the FGFM tunnel is torn down, FortiManager will try to re-establish the FGFM tunnel

View answer

Correct Answer: AC

Question #62

When installation is performed from the FortiManager, what is the recovery logic used between FortiManager and FortiGate for an FGFM tunnel?

A. After 15 minutes, FortiGate will unset all CLI commands that were part of the installation that caused the tunnel to go down

B. FortiManager will revert and install a previous configuration revision on the managed FortiGate

C. FortiGate will reject the CLI commands that will cause the tunnel to go down

D. FortiManager will not push the CLI commands as a part of the installation that will cause the tunnel to go down

View answer

Correct Answer: C

Question #63

Refer to the exhibit.An administrator has created a firewall address object that is used in multiple policy packages for multiple FortiGate devices in an ADOM.After the installation operation is performed, which IP/netmask will be shown on FortiManager for this firewall address object?

A. The FortiManager replaces the address object to none

B. 192

C. 0

D. 10

View answer

Correct Answer: D

Question #64

An administrator has assigned a global policy package to custom ADOM1. Then the administrator creates a new policy package, Fortinet, in the custom ADOM1.Which statement about the global policy package assignment to the newly-created policy package Fortinet is true?

A. When a new policy package is created, it automatically assigns the global policies to the new package

B. When a new policy package is created, you need to assign the global policy package from the global ADOM

C. When a new policy package is created, you need to reapply the global policy package to the ADOM

D. When a new policy package is created, you can select the option to assign the global policies to the new package

View answer

Correct Answer: A

Question #65

An administrator’s PC crashes before the administrator can submit a workflow session for approval. After the PC is restarted, the administrator notices that the ADOM was locked from the session before the crash. How can the administrator unlock the ADOM?

A. estore the configuration from a previous backup

B. og in as Super_User in order to unlock the ADOM

C. og in using the same administrator account to unlock the ADOM

D. elete the previous admin session manually through the FortiManager GUI or CLI

View answer

Correct Answer: C

Question #66

Refer to the exhibit.You are using the Quick Install option to install configuration changes on the managed FortiGate.Which two statements correctly describe the result? (Choose two.)

A. It will not create a new revision in the revision history

B. It provides the option to preview configuration changes prior to installing them

C. It cannot be canceled once initiated and changes will be installed on the managed device

D. It installs device-level changes to FortiGate without launching the Install Wizard

View answer

Correct Answer: CD

Question #67

Refer to the exhibit.According to the error message, why is FortiManager failing to add the FortiAnalyzer device?

A. The administrator must use the correct user name and password of the FortiAnalyzer device

B. The administrator must turn off the Use Legacy Device login and add the FortiAnalyzer device to the same network as FortiManager

C. The administrator must use the Add Model Device section and discover the FortiAnalyzer device

D. The administrator must select the FortiManager administrative access checkbox on the FortiAnalyzer management interface

View answer

Correct Answer: B

Question #68

Which of the following conditions trigger FortiManager to create a new revision history? (Choose two.)

A. hen creating a new policy package, the administrator can select the option to assign the global policy package to the new policy package

B. hen a new policy package is created, the administrator needs to reapply the global policy package to ADOM1

C. hen a new policy package is created, the administrator must assign the global policy package from the global ADOM

D. hen the new policy package is created, FortiManager automatically assigns the global policy package to the new policy package

View answer

Correct Answer: CD

Question #69

Which configuration setting for FortiGate is part of a device-level database on FortiManager?

A. et to workflow and use the ADOM locking feature

B. et to read/write and use the policy locking feature

C. et to normal and use the policy locking feature

D. et to disable and use the policy locking feature

View answer

Correct Answer: D

Question #70

Refer to the exhibit.Given the configuration shown in the exhibit, how did FortiManager handle the service category named General?

A. FortiManager ignored the firewall service category General and updated the FortiGate duplicate value in the FortiGate database

B. FortiManager ignored the firewall service category General and deleted the duplicate value in its database

C. FortiManager ignored the firewall service category General but created a new service category in its database

D. FortiManager ignored the firewall service category General and did not update its database with the value

View answer

Correct Answer: C

Question #71

Which two statements regarding device management on FortiManager are true? (Choose two.)

A. ortiManager will replace the deleted address object with the none address object in the referenced firewall policy

B. ortiManager will not allow the administrator to delete a referenced address object

C. ortiManager will replace the deleted address object with the all address object in the referenced firewall policy

D. ortiManager will disable the status of the referenced firewall policy

View answer

Correct Answer: AC

Question #72

View the following exhibit. Which statement is true regarding this failed installation log?

A. ortiManager updated the object ALL using the FortiGate value in its database

B. ortiManager installed the object ALL with the updated value

C. ortiManager created the object ALL as a unique entity in its database, which can be only used by thismanaged FortiGate

D. ortiManager updated the object ALL using the FortiManager value in its database

View answer

Correct Answer: D

Question #73

Which of the following statements are true regarding VPN Gateway configuration in VPN Manager? (Choose two.)

A. Managed gateways are devices managed by FortiManager in the same ADOM

B. External gateways are third-party VPN gateway devices only

C. Protected subnets are the subnets behind the device that you don"?t want to allow access to over the IPsec VPN

D. Managed devices in other ADOMs must be treated as external gateways

View answer

Correct Answer: AD

Question #74

Which three settings are the factory default settings on FortiManager? (Choose three.)

A. The administrative domain is disabled

B. The Port1 interface IP address is 192

C. Management Extension applications are enabled

D. The FortiManager setup wizard is disabled

E. FortiAnalyzer features are disabled

View answer

Correct Answer: ABE

Question #75

What does the diagnose dvm check-integrity command do? (Choose two.)

A. ortiManager updated the object ALL using FortiGate’s value in its database

B. ortiManager updated the object ALL using FortiManager’s value in its database

C. ortiManager created the object ALL as a unique entity in its database, which can be only used by this managed FortiGate

D. ortiManager installed the object ALL with the updated value

View answer

Correct Answer: BD

DON'T WANT TO MISS A THING?

100% Pass Cisco, PMP, CISA, CISM, AWS Practice test on SALE!
Get Now

Fortinet Exam Preparation with Latest NSE5_FMG-7.2 Exam Questions

View The Updated NSE5_FMG-7.2 Exam Questions

View The Updated Fortinet Exam Questions

View Answers after Submission

DON'T WANT TO MISS A THING?

100% Pass Cisco, PMP, CISA, CISM, AWS Practice test on SALE! Get Now

Fortinet Exam Preparation with Latest NSE5_FMG-7.2 Exam Questions

View The Updated NSE5_FMG-7.2 Exam Questions

View The Updated Fortinet Exam Questions

View Answers after Submission

100% Pass Cisco, PMP, CISA, CISM, AWS Practice test on SALE!
Get Now