DON'T WANT TO MISS A THING?

Certification Exam Passing Tips

Latest exam news and discount info

Curated and up-to-date by our experts

Yes, send me the newsletter

Latest Cisco 300-610 Exam and Free Practice Test | Real Exam Questions & Answers

Preparing for the latest Cisco 300-610 exam is easier when you have access to real exam questions and free practice tests. These valuable resources provide a detailed understanding of the exam format, covering key topics that will appear in the actual exam. By using up-to-date test questions and answers, candidates can focus on the areas that need improvement while practicing with realistic exam scenarios. Exam practice questions and certification practice tests help reinforce knowledge, allowing you to build confidence and accuracy before the exam day. Additionally, high-quality exam preparation materials ensure you are well-equipped to tackle any challenges. Take advantage of free practice tests and real exam questions to improve your chances of passing the Cisco 300-610 exam on your first try.

Take other online exams
Question #1
A Cisco engineer is configuring a customer design scenario that consists of Cisco Nexus 7000 series switches. The remote management access of all the Layer 2 switches is configured on a specific VLAN 12, with subnet 10.0.12.0/24. The route goes through a firewall that has rules to restrict traffic to/from VLAN 12. The engineer is adding a Nexus 3064 with the primary use as a core router for the VLANs. How must the engineer specify the management VRF to Use VLAN12 for management so it is on the same subnet a
A. lug the physical management interface into an access port on VLAN 12
B. reate SVI, add management to a new VRF, and keep it in global
C. onfigure VLAN 12 on the switch, and add it to the mgmt VRF
D. he L3 SVI on the switch must not accept management traffic
View answer
Correct Answer: C

View The Updated 300-610 Exam Questions

SPOTO Provides 100% Real 300-610 Exam Questions for You to Pass Your 300-610 Exam!

Get 300-610 Practice Test
Question #2
A customer is evaluating a new disaster-recovery solution for their SAN, which is used for noncritical CRM purposes. The SAN is frequently backed up locally at the customer's existing single location, and several hours of data loss can be sustained. The customer wants to retain complete control of the failover process to a separate physical location. Which type of DR is most suitable for the customer?
A. ctive/active
B. old standby
C. arm standby
D. ctive/passiv
View answer
Correct Answer: B
Question #3
An architect needs vendor-agnostic technology to orchestrate and automate a customer network with scripts. The technology must support running ad-hoc scripts from the CLI and support a deployment of scripts based on a large, readily available set the scripts. The technology must support running architect choose?
A. ython
B. uppet
C. isco Intersight
D. isco Power Too
View answer
Correct Answer: A
Question #4
An engineer deploys a Cisco UCS environment with the storage array directly attached to the Fabric Interconnects. The operations team mandates that the solution must not require the configuration of Fibre Channel zoning. Which configuration set meets these requirements?
A.
B.
C.
D.
View answer
Correct Answer: B
Question #5
To help automate the vHBA configuration process, a network engineer is configuring vHBA template pairs on UCS. The engineer is creating primary and secondary templates to define how vHBAs on a server connect to the SAN. Which fact about the template pair should the engineer consider for its potential impact on service?
A.
B.
C.
D.
View answer
Correct Answer: B
Question #6
A network engineer designs a virtual network in a Cisco UCS Manager. The traffic must be explicitly forwarded from the vNIC on the server to a specific uplink Ethernet port on the Cisco fabric interconnect. Also, the server NIC must use the same uplink Ethernet port after reboot. Finally, the design requires a QoS policy for remote direct memory access over converged Ethernet (RoCE v2). Which set of design features meets these requirements?
A. erver VLAN pool and Gold priority
B. NIC template and Gold priority
C. AN pin group and Platinum priority
D. NIC pool and Silver priorit
View answer
Correct Answer: C
Question #7
An engineer must interconnect two data centers to support the dynamic virtual machine migration. The data centers are currently interconnected using an IPv4 network. However, the data plane encapsulation of the underlay network is expected to change next year. To meet the VM migration requirement, the solution must track MAC route changes, update all other remote devices simultaneously and prevent excessive MAC flapping with broadcast and unicast traffic loops. The company must also use networking equipment
A. TV
B. oMPLS
C. XLAN
D. VP
View answer
Correct Answer: D
Question #8
An engineer must design a solution with storage reachability between 100 physical servers and a storage array. The storage array connectivity is to a SAN switch that is limited to 48 ports. Which topology meets the requirements without adding more MDS switches?
A.
B.
C.
D.
View answer
Correct Answer: D
Question #9
An engineer must design a disaster recovery solution for a Cisco ACI Multi-Site network One requirement is that the applications must have seamless IP addressing across sites. The solution must also be highly resilient and support Layer 2 adjacency. Which design meets these requirements?
A. ocalized bridge domain with local subnet localized Layer 2 broadcast flooding
B. tretched bridge domain with local subnet stretched Layer 2 broadcast domain
C. tretched bridge domain, subnet, and EPG localized Layer 2 broadcast flooding
D. ocalized bridge domain, subnet, and EPG stretched Layer 2 broadcast domai
View answer
Correct Answer: B
Question #10
A storage administrator receives reports of network delays when database software attempts to access the storage array. The virtual machines that host the database software are installed on different rack servers connected to the Cisco UCS Fabric Interconnect domain. The existing SAN switches are connected to the Fabric Interconnects using two 8 Gb port-channel interfaces to connect the storage array. The storage administrator has decided to deploy iSCSI storage with four 10 Gbps interfaces connected to the
A. SCSI storage appliance on Cisco UCS Fabric Interconnect in the storage end-host mode
B. SCSI storage with Cisco UCS Fabric Interconnect in the virtual port-channel mode
C. SCSI storage appliance on Cisco UCS Fabric Interconnect uplink trunk port
D. SCSI storage with Cisco UCS Fabric Interconnect using an appliance por
View answer
Correct Answer: D
Question #11
A SAN engineer needs to connect a Fibre Channel storage array to a Cisco MDS 9000 Series Switch by using an 8-Gbps interface. The switch must meet these requirements:ensure storage resilienceprevent oversubscriptionguarantee the highest line rate for traffic processingWhich configuration should be applied for the interface on the switch to meet these requirements?
A. onfigure the rate mode as shared
B. onfigure the rate mode as dedicated
C. et local buffering with B2B credits
D. et global buffering with B2B credits
View answer
Correct Answer: B
Question #12
Which type of Cisco Intersight workflow input controls the availability of other specific workflow inputs during the execution of a workflow?
A. onditional operation
B. arameter Set rule
C. tring Object Selector
D. rogressive Disclosure rul
View answer
Correct Answer: B
Question #13
large financial institution hosts all customer data in a critical data center with a single physical location. Top management is concerned about the risk of a single-site failure, but budget is also an issue, so the network engineering team is working to implement a cost-effective redundancy strategy with a second data center. The new data center must use a three-tier design identical to the existing data center. Business requirements dictate that all data must always be accessible from anywhere in the worl
A.
B.
C.
D.
View answer
Correct Answer: A
Question #14
An engineer working for a telecommunication company is evaluating the use of broadcast, unknown unicast, multicast replication modes for a VXLAN EVPN network. The engineer must leverage a pure unicast-based underlay network with the requirement to have multicast forwarding in the overlay. Which method must be used to achieve this task?
A. idirectional PIM
B. IM sparse mode
C. ngress replication
D. IM dense mod
View answer
Correct Answer: A
Question #15
A network architect working for a service provider must interconnect six geographically separated data centers that use networking equipment from different network vendors. The sites must support Layer 2 virtual machine mobility using a full mesh Layer 2 topology between the sites. Which data center technology meets these requirements?
A. PLS
B. TV
C. abricPath
D. PC
View answer
Correct Answer: A
Question #16
A storage administrator experiences a slow file transfer rate when archiving backup files on a tape library drive. The tape drive is connected directly to the Cisco Nexus 7009 switches. The file transfer rate gradually goes down with files that are over 100 GB in size. The requirement is for the file transfer rate to be consistent during the transfer window. Which two solutions meet this requirement?
A. erform a file transfer to the tape drive after business hours
B. plit the files before copying them to the tape drive
C. ompress the files to reduce the data size before copying to the tape drive
D. ncrease the tape drive disk size to increase the write speed
E. onnect the tape drive with two 10G interfaces in PC mode
View answer
Correct Answer: BC
Question #17
An engineer seeks a solution to retrieve routing information from Cisco Nexus switches. The data must be exported to a web application in a JSON or XML data format for monitoring and must be encrypted during transmission. The solution must not require extensive knowledge to support and should be simple to implement. Which technology accomplishes these goals?
A. isco Tetration
B. ython scripts
C. treaming telemetry
D. X-AP
View answer
Correct Answer: D
Question #18
An enterprise is experiencing transmission errors and excessive delays over their WAN when backing up user workstations. A systems architect decided to resolve the problems by centralizing data storage and processing to within the confines of the data center. Which technology is most suitable to mitigate the issues?
A.
B.
C.
D.
View answer
Correct Answer: A
Question #19
A customer with a single data center wants to provide resiliency in the form of an additional hosting location. The customer's engineering team requested asynchronous replication for the primary systems. The team prefers a minimal latency between locations for data replication and they can tolerate a 4-hour MTTR period. Which architecture offers maximum business continuity in the event of a primary data center failure?
A. ew secondary data center with Layer 2 spanned between data centers 1000 km away with RTT 10 ms
B. new DR site 50 km away with RTT 5 ms
C. ew secondary data center with Layer 2 spanned between data centers 2 km away with RTT 2 ms
D. ew secondary data center with Layer 3 VXLAN spanned between data centers 2 km away with RTT 2 m
View answer
Correct Answer: D
Question #20
An engineer deploys VMware ESXi hypervisor on blade servers. The virtual networking is managed by Cisco Nexus 1000V Series Switches. Which configuration aligns with Cisco recommended practices for providing high availability and a maximum throughput to the VMware ESXi hosts?
A. ual vNICs with LACP link aggregation
B. ual vNICs with static EtherChannel link aggregation
C. ual vNICs with MAC pinning link aggregation
D. ual vNIC with hardware fabric failover on the fabric interconnect
View answer
Correct Answer: C
Question #21
A data center with over 4000 VLANs must be stretched to a disaster recovery site. The solution must support the migration of virtual machines to a disaster recovery site. To support the scalability of the solution, the internal fabric of the main site must be from the DCI network. The connecting network infrastructure uses a 10 Gbps link with PIM ASM supported, which will be replaced with a different overlay in the next 12 months. The solution must support head-end replication for broadcast, unknown unicast
A. XLAN Multi-Site
B. PLS over GRE
C. TV
D. IS
View answer
Correct Answer: A

View The Updated CCNP Exam Questions

SPOTO Provides 100% Real CCNP Exam Questions for You to Pass Your CCNP Exam!

Get CCNP Practice Test

View Answers after Submission

Please submit your email and WhatsApp to get the answers of questions.

Note: Please make sure your email ID and Whatsapp are valid so that you can get the correct exam results.

Email:
Whatsapp/phone number:


Copyright © 2024. Designer by SPOTO Official Website. All Rights Reserved.