DON'T WANT TO MISS A THING?

Certification Exam Passing Tips

Latest exam news and discount info

Curated and up-to-date by our experts

Yes, send me the newsletter

Latest Cisco 300-535 SPAUTO Exam Questions– Boost Your Exam Readiness

Prepare to ace the Cisco 300-535 SPAUTO (Automating and Programming Cisco Service Provider Solutions) exam with our comprehensive exam resources. Our study material is expertly crafted to help you successfully pass the Cisco Service Provider certification. Packed with accurate exam questions and answers, test questions, and practice tests, our exam preparation resources cover all the essential topics in depth. Developed by industry professionals, our study guide provides clear explanations, real-world examples, and proven strategies to reinforce your understanding. With our simulated practice tests mirroring the actual exam environment, you'll gain the confidence and familiarity necessary to perform at your best on exam day. Don't leave your success to chance – leverage our meticulously curated exam resources to prepare thoroughly and maximize your chances of acing the 300-535 SPAUTO certification the first time around.
Take other online exams

Question #1
What tool is used to perform a “what if” failure analysis in a service provider network that is running Segment Routing?
A. isco WAN Automation Engine
B. isco Evolved Programmable Network Manager
C. isco Network Services Orchestrator
D. isco Segment Routing Path Computation Element
View answer
Correct Answer: A

View The Updated 300-535 Exam Questions

SPOTO Provides 100% Real 300-535 Exam Questions for You to Pass Your 300-535 Exam!

Question #2
Which command configures the remote peer when the Cisco IOS XR Traffic Controller is used?
A. eer-sync ipv4 192
B. tate ipv4 192
C. eer ipv4 192
D. tate-sync ipv4 192
View answer
Correct Answer: D
Question #3
Refer to the exhibit. An automation engineer has created a RESTCONF POST to configure network devices. Which two tasks are accomplished when the code is executed? (Choose two.)
A. ll interfaces except GigabitEthernet2 are reset to their default configurations
B. t replaces the entire configuration for GigabitEthernet2 on the device using RESTCONF
C. t merges the new configuration with the existing configuration on the device using RESTCONF
D. t compares the configuration to the device
View answer
Correct Answer: DE
Question #4
Refer to the exhibit. XTC has been configured by an engineer. What does the IPv4 address represent on the snippet?
A. ocal address of the router on which it listens for PCEP
B. onfigured for the local peer for state synchronization
C. estination address of the router on which it listens for PCEP
D. onfigured for the remote peer for state synchronization
View answer
Correct Answer: A
Question #5
Drag and drop the steps from the left into the correct order on the right to deploy an already created service into NSO. Not all options are used.Select and Place:Exhibit A:Exhibit B:
A. lease refer to Exhibit B for the answer
View answer
Correct Answer: A
Question #6
Which two use cases are valid for Cisco WAN Automation Engine? (Choose two.)
A. t configures a Cisco IOS XR router with BGP AS65000 with two neighbors and redistributes OSPF into BGP
B. t validates the BGP configuration on a Cisco IOS XR router, but it is a read-only module and cannot modify the configuration on the router
C. t validates the BGP configuration on a Cisco IOS XE router, but it is a check mode-only network module and cannot modify the configuration on the router
D. t configures a Cisco IOS router with BGP on AS500 and redistributes OSPF into BGP
View answer
Correct Answer: AB
Question #7
What is a benefit of Ansible for automating IOS XE or IOS XR platforms?
A. laybooks can be written in XML format
B. t has agent support
C. t supports asynchronous orchestration
D. t offers native orchestration support for Cisco platforms
View answer
Correct Answer: D
Question #8
Refer to the exhibit. What must be added after the last line of the Ansible playbook to check if the output contains “IOS-XR”?
A. ait_for: result[1] contains “IOS-XR”
B. ait_for: result[0] contains IOS-XR
C. otify: “IOS-XR”
D. ait_for_connection:
View answer
Correct Answer: B
Question #9
After a configuration request is sent using NETCONF, which call releases any locks and resources associated with the session?
A. confirm>
B. close-session>
C. get-config>
D. commit>
View answer
Correct Answer: C
Question #10
Refer to the exhibit. What is the cause of the status of the interface subscription?
A. he router cannot establish a gRPC connection with the collector
B. he sensor-group “Interface-Counters” does not contain a valid YANG path
C. he router is waiting for a collector to dial in
D. his is the expected state of an active subscription
View answer
Correct Answer: B
Question #11
An automation engineer is trying to configure a destination group to use dial-out telemetry with gRPC on a Cisco IOS XR platform. The template created is failing to apply. Which parameters must be configured?
A. ource IP address, source port, encoding, and sampling interval
B. ource IP address, source port, encoding, and protocol
C. estination IP address, destination port, encoding, and sensor path
D. estination IP address, destination port, encoding, and protocol
View answer
Correct Answer: D
Question #12
What is a key feature of YANG?
A. se identification
B. rror prediction
C. AVA compatibility
D. eusable types and groupings
View answer
Correct Answer: D
Question #13
An engineer is deploying a Python script to manage network devices through SSH. Which library based on Paramiko is used?
A. shmiko
B. aramiko
C. ibssh2
D. etmiko
View answer
Correct Answer: D
Question #14
What are two benefits of using Cisco NSO? (Choose two.)
A. exit-operation>
B. close-activity>
C. close-session>
D. boot-app>
View answer
Correct Answer: AC
Question #15
An engineer must change from using NETCONF for streaming telemetry to telemetry data using gRPC framework because NETCONF uses XML for message and payload encoding. Which two messages and payload encodings does gNMI use? (Choose two.)
A. gp
B. gp
C. gp
D. gp
View answer
Correct Answer: CE
Question #16
What are two characteristics of the NFV architecture approach? (Choose two.)
A. how service impact
B. ommit dry-run outformat native
C. seudo-commit
D. how dry-run output
View answer
Correct Answer: AE
Question #17
Refer to the exhibit. An engineer implements an automation with Cisco XTC. Which problem results in the 404 Not Found error code on the REST call?
A. he resource that you are trying to delete does not exist
B. ort 8080 is not enabled on XTC
C. TC does not offer any APIs
D. ou must change the request method
View answer
Correct Answer: B
Question #18
Refer to the exhibit. After this operation, what else is needed to change the hostname of the router to IOS-XR-SJC-19?
A. /employee[1]/firstName/value()
B. /employee[0]/firstName/value()
C. /employee[1]/firstName/text()
D. /employee[0]/firstName/text()
View answer
Correct Answer: D
Question #19
Which schema allows device configuration elements to be enclosed within a remote procedure call message when NETCONF is implemented?
A. SON-RPC
B. ML
C. AML
D. SON
View answer
Correct Answer: B
Question #20
Refer to the exhibit. Regarding the Python script using YDK, what is the result for a device that is running Cisco IOS XR Software?
A. etrieves the system time
B. onfigures the system time
C. rints the uptime of the CRUDService
D. rints the system uptime
View answer
Correct Answer: D

View The Updated CCNP Exam Questions

SPOTO Provides 100% Real CCNP Exam Questions for You to Pass Your CCNP Exam!

View Answers after Submission

Please submit your email and WhatsApp to get the answers of questions.

Note: Please make sure your email ID and Whatsapp are valid so that you can get the correct exam results.

Email:
Whatsapp/phone number: