DON'T WANT TO MISS A THING?

Certification Exam Passing Tips

Latest exam news and discount info

Curated and up-to-date by our experts

Yes, send me the newsletter

Latest CCNP 350-401 Practice Tests and Exam Dumps 2024, Cisco Enterprise Network Core exam | SPOTO

Prepare for the CCNP 350-401 exam with our latest practice tests and updated exam dumps for 2024. This 120-minute exam, part of the CCNP and CCIE Enterprise Certifications, evaluates your understanding of implementing core enterprise network technologies such as dual-stack (IPv4 and IPv6) architecture, virtualization, infrastructure, network assurance, security, and automation. Our exam materials, including exam dumps, sample questions, and mock exams, ensure thorough coverage of exam topics. Access free tests to enhance your exam practice and utilize our exam simulator and online exam questions for effective exam preparation. With our study resources and practice tests, you'll be well-prepared to excel in the Cisco Enterprise Network Core exam.
Take other online exams
Question #1
What does the Cisco DNA Center use to enable the delivery of applications through a network and to yield analytics for innovation?
A. process adapters
B. Command Runner
C. intent-based APIs
D. domain adapters
View answer
Correct Answer: A
Question #2
An engineer must configure interface GigabitEthernet0/0 for VRRP group 10. When the router has the highest priority in the group, it must assume the master role. Which command set must be added to the initial configuration to accomplish this task? Initial Configuration interface GigabitEthernet0/0 description To IDF A 38-24-044.40 ip address 172.16.13.2 255.255.255.0
A. standby 10 ip 172
B. vrrp group 10 ip 172
C. standby 10 ip 172
D. vrrp 10 ip 172
View answer
Correct Answer: CF
Question #3
What does the error message relay to the administrator who is trying to configure a Cisco IOS device?
A. The device received a valid NETCONF request and serviced it without error
B. The NETCONF running datastore is currently locked
C. A NETCONF request was made for a data model that does not exist
D. A NETCONF message with valid content based on the YANG data models was made, but the request failed
View answer
Correct Answer: A
Question #4
An engineer must create a configuration that executes the show run command and then terminates the session when user CCNP logs in. Which configuration change is required?
A. Add the access-class keyword to the username command
B. Add the autocommand keyword to the aaa authentication command
C. Add the access-class keyword to the aaa authentication command
D. Add the autocommand keyword to the username command
View answer
Correct Answer: D
Question #5
Which router is the designated router on the segment 192.168.0.0/24?
A. This segment has no designated router because it is a p2p network type
B. Router Chicago because it has a lower router ID
C. Router NewYork because it has a higher router ID
D. This segment has no designated router because it is a nonbroadcast network type
View answer
Correct Answer: D
Question #6
Which two commands ensure that DSW1 becomes the root bridge for VLAN 10 and 20? (Choose two.)
A. spanning-tree mst 1 priority 4096
B. spanning-tree mst 1 root primary
C. spanning-tree mst vlan 10,20 priority root
D. spanning-tree mst 1 priority 1
E. spanning-tree mstp vlan 10,20 root primary
View answer
Correct Answer: A
Question #7
An engineer is using XML in an application to send information to a RESTCONF-enabled device. After sending the request, the engineer gets this response message and an HTTP response code of 400. What do these responses tell the engineer?
A. The Accept header sent was application/xml
B. POST was used instead of PUT to update
C. The Content-Type header sent was application/xml
D. A JSON body was used
View answer
Correct Answer: D
Question #8
R1 is able to ping the R3 fa0/1 interface. Why do the extended pings fail?
A. The maximum packet size accepted by the command is 1476 bytes
B. The DF bit has been set
C. R3 is missing a return route to 10
D. R2 and R3 do not have an OSPF adjacency
View answer
Correct Answer: S
Question #9
The inside and outside interfaces in the NAT configuration of this device have been correctly identified. What is the effect of this configuration?
A. NAT64
B. dynamic NAT
C. static NAT
D. PAT
View answer
Correct Answer: A
Question #10
Which two actions provide controlled Layer 2 network connectivity between virtual machines running on the same hypervisor? (Choose two.)
A. Use a virtual switch provided by the hypervisor
B. Use a virtual switch running as a separate virtual machine
C. Use VXLAN fabric after installing VXLAN tunneling drivers on the virtual machines
D. Use a single routed link to an external router on stick
E. Use a single trunk link to an external Layer2 switch
View answer
Correct Answer: CD
Question #11
An engineer configures monitoring on SW1 and enters the show command to verify operation. What does the output confirm?
A. RSPAN session 1 is incompletely configures for monitoring
B. RSPAN session 1 monitors activity on VLAN 50 of a remote switch
C. SPAN session 2 monitors all traffic entering and exiting port FastEthernet 0/15
D. SPAN session 2 only monitors egress traffic exiting port FastEthernet 0/14
View answer
Correct Answer: A
Question #12
Which devices does Cisco DNA Center configure when deploying an IP-based access control policy?
A. all devices integrating with ISE
B. selected individual devices
C. all devices in selected sites
D. all wired devices
View answer
Correct Answer: B
Question #13
Which command allows hosts that are connected to FastEthernet0/2 to access the Internet?
A. ip nat inside source list 10 interface FastEthernet0/2 overload
B. ip nat inside source list 10 interface FastEthernet0/1 overload
C. ip nat outside source static 209
D. ip nat outside source list 10 interface FastEthernet0/2 overload
View answer
Correct Answer: C
Question #14
A network engineer configures a GRE tunnel and enters the show interface tunnel command. What does the output confirm about the configuration?
A. The keepalive value is modified from the default value
B. The physical interface MTU is 1476 bytes
C. The tunnel mode is set to the default
D. Interface tracking is configured
View answer
Correct Answer: A
Question #15
Wireless users report frequent disconnections from the wireless network. While troubleshooting, a network engineer finds that after the user is disconnected, the connection re-establishes automatically without any input required. The engineer also notices these message logs: AP 'AP2' is down. Reason: Radio channel set. 6:54:04 PM AP 'AP4' is down. Reason: Radio channel set. 6:44:49 PM AP 'AP7' is down. Reason: Radio channel set. 6:34:32 PM Which action reduces the user impact?
A. enable coverage hole detection
B. increase the AP heartbeat timeout
C. enable BandSelect
D. increase the dynamic channel assignment interval
View answer
Correct Answer: A
Question #16
PC-1 must access the web server on port 8080. To allow this traffic, which statement must be added to an access control list that is applied on SW2 port G0/0 in the inbound direction?
A. permit tcp host 172
B. permit tcp host 192
D. permit tcp host 192
View answer
Correct Answer: B
Question #17
What does the LAP send when multiple WLCs respond to the CISCO-CAPWAP-CONTROLLER.localdomain hostname during the CAPWAP discovery and join process?
A. unicast discovery request to the first WLC that resolves the domain name
B. broadcast discovery request
C. join request to all the WLCs
D. unicast discovery request to each WLC
View answer
Correct Answer: C
Question #18
Which command when applied to the Atlanta router reduces type 3 LSA flooding into the backbone area and summarizes the inter-area routes on the Dallas router?
A. Atlanta(config-router)#area 0 range 192
B. Atlanta(config-router)#area 1 range 192
C. Atlanta(config-router)#area 0 range 192
D. Atlanta(config-router)#area 1 range 192
View answer
Correct Answer: C
Question #19
Which outbound access list, applied to the WAN interface of a router, permits all traffic except for http traffic sourced from the workstation with IP address 10.10.10.1?
A. ip access-list extended 200deny tcp host 10
B. ip access-list extended 10deny tcp host 10
C. ip access-list extended NO_HTTPdeny tcp host 10
D. ip access-list extended 100 deny tcp host 10
View answer
Correct Answer: S
Question #20
Which two commands are needed to allow for full reachability between AS 1000 and AS 2000? (Choose two.)
A. R2#no network 10
B. R2#network 209
C. R2#network 192
D. R1#no network 10
E. R1#network 192
View answer
Correct Answer: B
Question #21
A network administrator is preparing a Python script to configure a Cisco IOS XE-based device on the network. The administrator is worried that colleagues will make changes to the device while the script is running. Which operation of the ncclient manager prevents colleagues from making changes to the devices while the script is running?
A. m
B. m
C. m
D. m
View answer
Correct Answer: A
Question #22
Which type of antenna does the radiation pattern represent?
A. multidirectional
B. directional patch
C. omnidirectional
D. Yagi
View answer
Correct Answer: B
Question #23
How does SSO work with HSRP to minimize network disruptions?
A. It enables HSRP to elect another switch in the group as the active HSRP switch
B. It ensures fast failover in the case of link failure
C. It enables data forwarding along known routes following a switchover, while the routing protocol reconverges
D. It enables HSRP to failover to the standby RP on the same device
View answer
Correct Answer: C
Question #24
Which command must be applied to R2 for an OSPF neighborship to form?
A. network 20
B. network 20
C. network 20
D. network 20
View answer
Correct Answer: C
Question #25
An engineer attempts to configure a router on a stick to route packets between Clients, Servers, and Printers; however, initial tests show that this configuration is not working. Which command set resolves this issue?
A. interface Vlan10 no ip vrf forwarding Clients ! interface Vlan20 no ip vrf forwarding Servers ! interface Vlan30 no ip vrf forwarding Printers
B. router eigrp 1 network 10
C. interface Vlan10 no ip vrf forwarding Clients ip address 192
D. router eigrp 1 network 10
View answer
Correct Answer: C

View Answers after Submission

Please submit your email and WhatsApp to get the answers of questions.

Note: Please make sure your email ID and Whatsapp are valid so that you can get the correct exam results.

Email:
Whatsapp/phone number:


Copyright © 2024. Designer by SPOTO Official Website. All Rights Reserved.