DON'T WANT TO MISS A THING?

Certification Exam Passing Tips

Latest exam news and discount info

Curated and up-to-date by our experts

Yes, send me the newsletter

Latest 2024 JN0-348 Certification Questions & Mock Tests, Juniper JNCIS-ENT Certification | SPOTO

Welcome to SPOTO's Latest 2024 Juniper JN0-334 Certification Questions & Mock Tests, your premier resource for mastering the Juniper JNCIS-SEC Certification. Our platform offers high-quality practice tests and exam materials meticulously curated to optimize your exam preparation journey. This track enables you to demonstrate competence with networking technology, specifically focusing on Juniper Networks enterprise routing and switching platforms. JNCIS-ENT, the specialist-level certification in this track, is tailored for experienced networking professionals with beginner to intermediate knowledge of routing and switching implementations in Junos. Our updated exam questions ensure you're fully prepared to succeed, verifying your basic understanding of routing and switching technologies, along with related platform configuration and troubleshooting skills. Delve into our comprehensive collection of sample questions, exam dumps, and online exam questions to deepen your understanding. With our high-quality practice tests, you'll be well-equipped to pass the certification exam and advance your career in networking. Trust SPOTO to guide you toward exam success.

Take other online exams
Question #1
Your network is configured with dynamic ARP inspection (DAI) using the default parameters for all the DHCP and ARP related configurations. You just added a new device connected to a trunk port and configured it to obtain an IP address using DHCP. Which two statements are correct in this scenario? (Choose two.)
A. The DHCP server assigns the IP addressing information to the new device
B. DAI validates the ARP packets for the new device against the DHCP snooping database
C. The ARP request and response packets for the new device will bypass DAI
D. DHCP snooping adds the DHCP assigned IP address for the new device to its database
View answer
Correct Answer: C
Question #2
Which statement is true about IP-IP tunnels?
A. Intermediate devices must have a route to the destination address of the traffic being tunneled
B. Intermediate devices must have a route to both the tunnel source address and the tunnel destination address
C. Intermediate devices must have a route to the tunnel destination address but do not require a route to the tunnel source address
D. Intermediate devices must have a route to the tunnel source address but do not require a route to the tunnel destination address
View answer
Correct Answer: AD
Question #3
You are enabling dynamic ARP inspection on an EX4300 switch. Which service is enabled by default in this scenario?
A. DHCP snooping
B. persistent MAC learning
C. MAC limiting
D. IP Source Guard
View answer
Correct Answer: BD
Question #4
You configured a GRE tunnel that traverses a path using default MTU settings. You want to ensure that packets are not dropped of fragmented. In this scenario, what is the maximum packet size that would traverse the GRE tunnel?
A. 1500
B. 1400
C. 1524
D. 1476
View answer
Correct Answer: B
Question #5
Referring to the exhibit, which configuration will force traffic to always use ae0.0 as long as it is active?
A. user@switchC# show switch-options redundant-trunk-group { group rtg1 { interface ge-0/0/0
B. user@switchC# show switch-options redundant-trunk-group { group rtg1 { interface ge-0/0/0
C. user@switchC# show switch-options redundant-trunk-group { group rtg1 { interface ge-0/0/0
D. user@switchC# show switch-options redundant-trunk-group { group rtg1 { interface ge-0/0/0
View answer
Correct Answer: C
Question #6
You have a conference room with an open network port that is used by employees to connect to the network. You are concerned about rogue switches being connected to this port. Which two features should you enable on your switch to limit access to this port? (Choose two.)
A. DHCP snooping
B. dynamic ARP inspection
C. MAC limiting
D. 802
View answer
Correct Answer: C
Question #7
Your network connections to the Internet through two different ISPs using EBGP. You must ensure that ISP1 is the primary path used for all traffic entering your network while using ISP2 as a backup path. In this scenario, which statement is correct?
A. You should use a lower MED value on routes sent to ISP1
B. You should assign a higher local preference on routes that you are sending to ISP1
C. You should change the next hop for all routers sent to ISP2
D. You should prepend your local AS number three times on routes that you are sending to ISP2
View answer
Correct Answer: A
Question #8
You want to advertise only a default route into a new area, which will be called area 7. In this scenario, which configuration statement would solve this problem?
A. user@host# set protocols ospf area 0
B. user@host# set protocols ospf area 0
C. user@host# set protocols ospf area 0
D. user@host# set protocols ospf area 0
View answer
Correct Answer: CD
Question #9
You added a new ESXi host connected to port ge-0/0/1. One of the VMs configured with VLAN 10 is not reachable from any other device on the switch. To troubleshoot, you decide to verify if the VM’s MAC address is learned properly under VLAN 10. Which command would you use in this scenario?
A. show ethernet-switching table vlan-id 10
B. show interfaces ge-0/0/1 detail
C. show vlans 10
D. monitor interface ge-0/0/1
View answer
Correct Answer: AC
Question #10
You want to configure Layer 2 services over an IP-based tunneling mechanism between two sites. Which configuration statement is required to accomplish this task?
A. set interfaces gr-0/0/0
B. set interfaces ip-0/0/0
C. set interfaces gr-0/0/0
D. set interfaces ip-0/0/0
View answer
Correct Answer: AB
Question #11
You have configured the router with an IS-IS interface metric of 2048. However, the IS-IS interface metric of 63 is being applied for the interface of this router. What must you do to enable the larger metric value?
A. Enable wide metrics
B. Disable narrow metrics
C. Restart the IS-IS protocol
D. Enable level 1 IS-IS routing
View answer
Correct Answer: CD
Question #12
You are adding a new EX4300 member switch to your existing EX4300 Virtual Chassis. However, the new member is not running the same Junos version as the other members. By default, what is the expected behavior in this scenario?
A. the Virtual Chassis will transition into a split brain situation between the existing master Routing Engine and the switch running the different version
B. The new switch will automatically pull the correct version from the master Routing Engine and perform the necessary upgrade
C. The new switch will be assigned a member ID and then placed in an inactive state
D. The new switch is not recognized by the Virtual Chassis
View answer
Correct Answer: AD
Question #13
You want to configure your Junos device so that routing information from certain prefixes on a neighboring router are ignored. What should you configure on your device?
A. It interface
B. firewall rule
C. martian addressD
View answer
Correct Answer: AC

View Answers after Submission

Please submit your email and WhatsApp to get the answers of questions.

Note: Please make sure your email ID and Whatsapp are valid so that you can get the correct exam results.

Email:
Whatsapp/phone number:


Copyright © 2024. Designer by SPOTO Official Website. All Rights Reserved.