DON'T WANT TO MISS A THING?

Certification Exam Passing Tips

Latest exam news and discount info

Curated and up-to-date by our experts

Yes, send me the newsletter

Juniper Networks Curriculum-E Series JN0-130 Exam Questions PDF Free | SPOTO

Prepare for the Juniper Networks Curriculum-E Series JN0-130 exam with a free download of the latest JN0-130 exam questions PDF from SPOTO. This exam is part of the JNCIA-Junos certification track, focusing on foundational networking concepts, including Junos OS, routing, and switching. The JN0-130 exam is designed for professionals who want to prove their skills in configuring and managing Juniper Networks devices, specifically the E Series routers. By downloading the free JN0-130 exam questions PDF, you can practice key concepts and get a better understanding of the exam format. SPOTO's comprehensive exam materials, including updated practice questions, will help you prepare effectively and pass the JNCIA-Junos certification exam with confidence. Start your preparation now with free resources and boost your networking career with Juniper certification.
Take other online exams
Question #1
What is the maximum number of NET addresses supported on a virtual router?
A. 0
B. 1
C. 2
D. 3
View answer
Correct Answer: D

View The Updated JN0-130 Exam Questions

SPOTO Provides 100% Real JN0-130 Exam Questions for You to Pass Your JN0-130 Exam!

Get JN0-130 Practice Test
Question #2
Which configuration command causes a PPPoE subscriber to be connected to a captive portal?
A. url
B. motm
C. acName
D. sessions
View answer
Correct Answer: A
Question #3
Once the TCP connection is established, which message type initiates the BGP peering process?
A. Open
B. Active
C. Update
D. Notification
View answer
Correct Answer: A
Question #4
A log filter of log severity DEBUG pppPacket ATM 4/3.66 is configured within the category of pppPacket. Which configuration command removes this specific log filter?
A. no log severity pppPacket
B. no log severity debug pppPacket
C. no log severity pppPacket atm 4/3
D. no log severity debug pppPacket 4/3
View answer
Correct Answer: C
Question #5
Which CLI command is used to display the IP address assigned to Dynamic Subscriber Interface and related hardware address using the DHCP Relay Proxy function?
A. show ip dhcp external
B. show dhcp binding relay-proxy
C. show ip dhcp binding relay-proxy
D. show dhcp relay proxy binding
View answer
Correct Answer: B
Question #6
Which configuration command assigns a host route to the CPE workstation address of 192.168.10.1 in a Bridged 1483 network?
A. ip route 192
B. ip route 192
C. add route 192
D. add route 192
View answer
Correct Answer: A
Question #7
Which two routes do P routers see by default in a BGP MPLS VPN configuration? (Choose two.)
A. IGP routes advertised by P routers
B. IGP routes advertised by PE routers
C. VPN routes advertised by PE routers
D. VPN routes advertised by CE routers
View answer
Correct Answer: AB
Question #8
Which CLI command displays the IS-IS level used by each interface?
A. show clns neighbor
B. show isis neighbor
C. show clns interface
D. show isis interface
View answer
Correct Answer: C
Question #9
Two Level 1 routers are exchanging Hello packets with different Area IDs. What occurs between these routers?
A. An Adjacency is formed
B. No IS-IS PDUs are sent
C. An Adjacency does not form
D. An Adjacency forms but traffic is not forwarded
View answer
Correct Answer: C
Question #10
You would like to configure a fractional T1 interface on a channelized T3 controller with the following properties: ? Slot - 4 ? Port - 1 #2 ? DS0 - 1-12 ? Speed - 64 bps Which set of configuration commands accomplishes this goal?
A. controller t3 1/4 t1 1/2 dso 1-12 speed 64
B. controller t3 1/4 t1 1/2 timeslots 1-12 speed 64
C. controller t3 4/1 t1 2/1 dso 1-12 speed 64
D. controller t3 4/1 t1 2/1 timeslots 1-12 speed 64
View answer
Correct Answer: D
Question #11
If all OSPF routers on a broadcast network have the same OSPF priority, which parameter is used to determine the new BDR at the time of a DR failure?
A. area ID
B. router ID
C. loopback address
D. IP address of interface on broadcast network
View answer
Correct Answer: B
Question #12
Where are Level 1 LSPs flooded?
A. over all physical links
B. over all Level 1 adjacencies
C. over all Level 1 and Level 2 adjacencies
D. over all Level 1 and Level 2 adjacencies within the IS-IS domain
View answer
Correct Answer: B
Question #13
Which CLI command is used to display BGP-learned routes that are now in the OSPF link-state database?
A. show ip ospf neighbors
B. show ip ospf database router
C. show ip ospf remote-neighbors
D. show ip ospf database external
View answer
Correct Answer: D
Question #14
You are trying to recover from a corrupted flash. Which configuration command configures an IP address of 192.168.1.1/24 on the SRP management interface when the ERX1400 router is at the boot## prompt?
A. ip address 192
B. ip address 192
C. ip address 192
D. ip address 192
View answer
Correct Answer: C
Question #15
Which CLI command shows whether an L2TP Tunnel Switch profile is applied?
A. l2tp tunnel test
B. show subscribers
C. show aaa domain-map
D. show l2tp destination profile
View answer
Correct Answer: C
Question #16
Which configuration command permits dynamic detection of the ATM frame format?
A. aal5mux
B. aal5snap
C. aal5dynamic
D. aal5autoconfig
View answer
Correct Answer: D
Question #17
Which set of configuration commands configures MBGP on the ERX Edge Router?
A. router bgp 100 neighbor 192
B. router bgp 100 neighbor 192
C. router bgp 100 neighbor 192
D. router bgp 100 neighbor 192
View answer
Correct Answer: D
Question #18
When does the E-series router start monitoring DHCP traffic using the DHCP External function?
A. When the discovery packet enters the router from the DHCP client
B. Only when the offer packet enters the router from the DHCP server
C. When the acknowledge packet enters the router from the DHCP server
D. Only when the discovery packet leaves the router going to the DHCP server
View answer
Correct Answer: D
Question #19
Which interface tunnel parameter allows an LSP to use a specified explicit route?
A. path-option
B. route-option
C. explicit-path-option
D. explicit-route-option
View answer
Correct Answer: A
Question #20
An ATM PVC is configured as atm pvc 33 0 33 aal5snap 256. What does the 256 option specify?
A. CBR with a peak rate of 256K bits per second
B. UBR with a peak rate of 256K bits per second
C. CBR with a peak rate of 256K bytes per second
D. UBR with a peak rate of 256K bytes per second
View answer
Correct Answer: B
Question #21
By default, how often does an ERX Edge Router send an OSPF link-state advertisement in a stable network?
A. every 10 seconds
B. every 30 seconds
C. every 10 minutes
D. every 30 minutes
View answer
Correct Answer: D
Question #22
How may L2TP tunnel destinations are allowed per domain?
A. 1
B. 11
C. 21
D. 31
View answer
Correct Answer: D
Question #23
Which term describes a group of packets sharing common forwarding characteristics?
A. common forwarding class
B. forwarding equivalence class
C. equivalent class characteristics
D. forwarding class characteristics
View answer
Correct Answer: B
Question #24
What are three ways an IP interface can be assigned to a virtual router in a PPP over ATM environment? (Choose three.)
A. profile
B. policy list
C. domain map
D. RADIUS VSA
E. classifier ACL
View answer
Correct Answer: ACD
Question #25
Which set of commands configures a PPPoE interface and pushes http ://www.isp1home.com as a URL to the user's PC?
A. interface fastethernet 3/1 pppoe url http://www
B. interface fastethernet 3/1 pppoe url http://www
C. interface fastethernet 3/1 pppoe pppoe subinterface fastethernet 3/1
D. interface fastethernet 3/1 pppoe pppoe subinterface fastethernet 3/1
View answer
Correct Answer: D
Question #26
Which three can be specified within an RSVP session attribute object? (Choose three.)
A. hold priority
B. setup priority
C. FEC IP address
D. resource availability
E. local protection option
View answer
Correct Answer: ABE
Question #27
Which two functions can be configured on the ERX Edge Router to support MBGP? (Choose two.)
A. address-family ipv4 unicast
B. address-family vpnv4 unicast
C. address-family ipv4 multicast
D. address-family vpnv4 multicast
View answer
Correct Answer: BC
Question #28
During OSPF adjacency formation, in which state is a router in when an OSPF hello packet has been sent but bi-directional communication has not been achieved?
A. Init
B. 2Way
C. ExStart
D. Exchange
View answer
Correct Answer: A
Question #29
You would like to operate IS-IS on interface atm 6/0.33 with an IP address of 192.168.1.1/24. Which set of commands accomplishes this?
A. router isis network 192
B. router isis network 192
C. interface atm 6/0
D. interface atm 6/0
View answer
Correct Answer: D
Question #30
Which OSPF router type summarizes network advertisements from one OSPF area into another?
A. ABR
B. ASBR
C. edge router
D. backbone router
View answer
Correct Answer: A

View The Updated Juniper Exam Questions

SPOTO Provides 100% Real Juniper Exam Questions for You to Pass Your Juniper Exam!

Get Juniper Practice Test

View Answers after Submission

Please submit your email and WhatsApp to get the answers of questions.

Note: Please make sure your email ID and Whatsapp are valid so that you can get the correct exam results.

Email:
Whatsapp/phone number:


Copyright © 2024. Designer by SPOTO Official Website. All Rights Reserved.