DON'T WANT TO MISS A THING?

Certification Exam Passing Tips

Latest exam news and discount info

Curated and up-to-date by our experts

Yes, send me the newsletter

JN0-105 Junos Associate JNCIA -Junos​ Questions and Answers 2024 | SPOTO

The JN0-105 exam is an essential certification for network professionals seeking the JNCIA-Junos certification. This exam validates your understanding of Junos OS, networking fundamentals, device configuration, and troubleshooting. As part of the Junos Associate track, it covers key concepts such as routing, switching, and network protocols. To support your preparation, SPOTO offers a comprehensive collection of JN0-105 Junos Associate JNCIA-Junos Questions and Answers for 2024. These expert-designed practice questions and detailed answers are specifically tailored to help you master the exam content. By utilizing SPOTO’s resources, you’ll gain a deeper understanding of the material, refine your exam strategy, and enhance your confidence, ultimately preparing you for success in the JNCIA-Junos certification exam.
Take other online exams
Question #1
Which statement is true about the routing table?
A. The routing table exists in the control plane only
B. The routing table exists in the control plane and in the forwarding plane
C. The routing table contains both active and inactive routes
D. The routing table is stored on compact flash
View answer
Correct Answer: A

View The Updated JN0-105 Exam Questions

SPOTO Provides 100% Real JN0-105 Exam Questions for You to Pass Your JN0-105 Exam!

Get JN0-105 Practice Test
Question #2
Which word starts the command to remove configuration elements on a Junos device?
A. undo
B. remove
C. delete
D. unset
View answer
Correct Answer: C
Question #3
You must segment your internal /24 network into a minimum of 12 subnets, each containing a minimum of 12 hosts. Which network mask do you use?
A. /26
B. /27
C. /28
D. /29
View answer
Correct Answer: C
Question #4
Which statement is true about routing tables on a Junos device?
A. They purge any routes not selected as active routes
B. They exist in two places: the Routing Engine and the Packet Forwarding Engine
C. They are exclusively designed to handle dynamic routing protocols
D. They populate the forwarding table
View answer
Correct Answer: D
Question #5
Click the Exhibit button. You are asked to create a firewall filter to count IPv6 packets that arrive with a no next header value. As shown in the exhibit, you have created and applied the count-no-header firewall filter to the ge-0/0/0 interface. The commit operation fails. What is causing this problem?
A. The firewall term does not include inet6 in the from statement
B. IPv6 interfaces do not support firewall filters
C. The filter name must be different than the counter name
D. The firewall family is not correct
View answer
Correct Answer: D
Question #6
What are three examples of dynamic IGPs? (Choose three.)
A. OSPF
B. BGP
C. IS-IS
D. PIM
E. RIP
View answer
Correct Answer: ACE
Question #7
By default, which character indicates the UNIX shell prompt?
A. #
B. >
C. $
D. %
View answer
Correct Answer: D
Question #8
You issue the command telnet interface ge-1/1/0 10.10.10.1 source 192.168.100.1 bypass- routing. Which statement is correct?
A. The bypass-routing parameter is ignored when using private IP addressing
B. The telnet session will have the source IP address 10
C. The telnet session will connect to the neighboring device's interface ge-1/1/0
D. Return traffic for the telnet session might not arrive at interface ge-1/1/0
View answer
Correct Answer: D
Question #9
You have been asked to configure your router to send link-related SNMP trap notifications to the network management system (NMS) located at address 172.16.17.1. Which two commands are required? (Choose two.)
A. set snmp trap-group my-trap-group targets 172
B. set snmp targets 172
C. set snmp trap-group my-trap-group link-status
D. set snmp trap-group my-trap-group categories link
View answer
Correct Answer: AD
Question #10
What represents the binary equivalence of 96?
A. 11010100
B. 01100000
C. 11010000
D. 11101010
View answer
Correct Answer: B
Question #11
-- Exhibit -user@router> show route inet.0: 9 destinations, 9 routes (9 active, 0 holddown, 0 hidden) + = Active Route, - = Last Active, * = Both 10.10.10.91/32 *[Direct/0] 00:09:40 >via lo0.0 10.10.10.92/32 *[OSPF/10] 00:01:50, metric 1 >to 172.16.1.2 via ge-0/0/2.0 100.100.1.0/24 *[Static/5] 00:01:50 Reject 172.16.1.0/24 *[Direct/0] 00:06:09 >via ge-0/0/2.0 172.16.1.1/32 *[Local/0] 00:06:09 Local via ge-0/0/2.0 192.168.0.0/16 *[Aggregate/130] 00:00:06 Reject 192.168.0.0/17 *[Aggregate/130] 00:00:06 >to 17
A. 192
B. 192
C. 192
D. 192
View answer
Correct Answer: C
Question #12
Click the Exhibit button. Referring to the exhibit, which statement is true?
A. The customer's link will failover in nine seconds
B. the customer has not enabled security for BFD
C. The customer has set the version parameter to automatic
D. The customer's link flapped within the last hour
View answer
Correct Answer: D
Question #13
When considering the default behavior of Junos platforms, which statement is true about archiving configurations?
A. A system log message is generated, confirming the transfer attempt
B. The destination filename format can be altered by configuration
C. The frequency the system archives the configuration cannot be changed
D. An archive log is created to track transfer attempts, both failed and successful
View answer
Correct Answer: A
Question #14
You have been asked to configure your MX240 with a default route toward your upstream ISP at IP address 192.168.100.1. Which command successfully completes this task?
A. user@router# set routing-options static route 0
B. user@router# set routing-options default route 0
C. user@router# set forwarding-options static route 0
D. user@router# set protocols default route 0
View answer
Correct Answer: A
Question #15
Which statement describes an advantage of dynamic routing?
A. Dynamic routing provides redundant IP addresses for end-user devices, unlike static routing
B. Dynamic routing requires no initial user configuration, unlike static routing
C. Dynamic routing provides DNS services along with IP connectivity; static routing does not
D. Dynamic routing typically requires less time to implement than static routing in a large network
View answer
Correct Answer: D
Question #16
What is the default export routing policy for EBGP?
A. Accept all active BGP routes
B. Accept all BGP routes
C. Accept no routes
D. Accept all active IGP routes
View answer
Correct Answer: A
Question #17
What information does the help topic command provide?
A. router's version and serial number to help open a case with JTAC
B. software documentation describing features and configuration tasks within JUNOS
C. a brief description of commands and their default values
D. a verification of the current configuration on the router
View answer
Correct Answer: B
Question #18
Which three protocols use UDP as a transport protocol by default? (Choose three.)
A. HTTP
B. TFTP
C. DNS
D. SNMP
E. SMTP
View answer
Correct Answer: BCD
Question #19
Which statement is correct about policies in the Junos OS?
A. Export policies are used to filter routes from the RE forwarding table to the PFE forwarding table
B. Export policies are used to filter routes destined for the routing table
C. Export policies are used to filter routes being sent to neighboring devices
D. Export policies are used to filter traffic leaving the device
View answer
Correct Answer: C
Question #20
Click the Exhibit button. Referring to the exhibit, which next-hop interface will be used to reach the 10.21.14.16 destination?
A. ge-0/0/3
B. ge-0/0/0
C. ge-0/0/2
D. ge-0/0/1
View answer
Correct Answer: D
Question #21
You issue the ping interface t1-1/1/0 bypass-routing count 1000 rapid command. Which statement is correct?
A. The count parameter creates a counter that you can view with the show firewall command
B. The count parameter allows the router to count the number of pings for logging purposes
C. The count parameter allows the router to pause for 1000 seconds before sending out a ping
D. The count parameter allows the router to send out 1000 pings and then stop
View answer
Correct Answer: D
Question #22
-- Exhibit -traceroute to 10.1.15.2 (10.1.15.2), 30 hops max, 40 byte packets 1 10.1.36.1 (10.1.36.1) 0.651 ms 7.834 ms 0.506 ms 2 10.1.23.1 (10.1.23.1) 0.5 ms 0.5 ms 0.5 ms 3 * * * 4 * * * -- Exhibit -Referring to the exhibit, which statement is correct?
A. The packets have exceeded the time-to-live value
B. There is a loop
C. The asterisks indicate a response time out
D. The asterisks indicate that the traceroute is completed
View answer
Correct Answer: C
Question #23
Which two statements are correct about Layer 2 broadcast frames? (Choose two.)
A. Layer 2 broadcast frames are processed by all devices on the same VLAN
B. Layer 2 broadcast frames are discarded by routers that connect to multiple VLANs
C. Layer 2 broadcast frames are relayed by routers to all connected VLANs
D. Layer 2 broadcast frames are relayed by switches to devices on the same VLAN
View answer
Correct Answer: AD
Question #24
Which command would correctly define a router's host-name?
A. # set ip host-name
B. > set ip host-name
C. # set system host-name
D. > set system host-name
View answer
Correct Answer: C
Question #25
What are the usable hosts on the .128.0/19 network?
A.
B.
C.
D.
View answer
Correct Answer: D
Question #26
Which three SONET network elements are used for troubleshooting? (Choose three.)
A. line
B. path
C. circuit
D. section
E. segment
View answer
Correct Answer: ABD
Question #27
What are two valid actions for a routing policy? (Choose two.)
A. discard
B. next policy
C. accept
D. ignore
View answer
Correct Answer: BC
Question #28
Which command causes the Junos OS temporarily activate a configuration?
A. commit check
B. commit synchronize
C. commit confirmed
D. commit and-quit
View answer
Correct Answer: C
Question #29
You have configured logging to the console port but are uncertain of the impact to the device with troubleshooting. In this scenario, which command would allow you to minimize the impact?
A. set system syslog console any none
B. set system syslog log-rotate-frequency 15
C. commit confirmed 1 comment troubleshoot
D. commit synchronize comment troubleshoot
View answer
Correct Answer: A
Question #30
Given the host IP address of 192.168.100.60 and a network mask of 255.255.255.224 (or /27), which address represents the correct network address for the referenced host?
A. 192
B. 192
C. 192
D. 192
View answer
Correct Answer: D
Question #31
-- Exhibit -[editsnmp] user@router# show communityCommunityA { authorization read-only; clients { 192.168.1.0/28; } } trap-groupgroupA { categories { link; } targets { 192.168.100.1; 192.168.200.1; } } -- Exhibit -Referring to the exhibit, what is the purpose of the targets section of the configuration?
A. It defines which devices will be sending traps
B. It specifies where to send traps
C. It defines the IP addresses of management systems that can access the device
D. It specifies which devices can be polled for SNMP data
View answer
Correct Answer: B
Question #32
Which two are correct when configuring an IP address for a Fast Ethernet interface? (Choose two.)
A. set interfaces fe-0/0/0 address 10
B. set interfaces fe-0/0/0
C. set interfaces fe-0/0/0
D. set interfaces fe-0/0/0 unit 0 family inet address 10
View answer
Correct Answer: BD

View The Updated Juniper Exam Questions

SPOTO Provides 100% Real Juniper Exam Questions for You to Pass Your Juniper Exam!

Get Juniper Practice Test

View Answers after Submission

Please submit your email and WhatsApp to get the answers of questions.

Note: Please make sure your email ID and Whatsapp are valid so that you can get the correct exam results.

Email:
Whatsapp/phone number:


Copyright © 2024. Designer by SPOTO Official Website. All Rights Reserved.