DON'T WANT TO MISS A THING?

Certification Exam Passing Tips

Latest exam news and discount info

Curated and up-to-date by our experts

Yes, send me the newsletter

Huawei H12-811 Practice Questions & Exam Questions and Answers

Preparing for the Huawei HCIA Datacom H12-811 exam can be a challenging yet rewarding journey. Our tailored study materials offer a wealth of real exam questions and answers, specifically designed to help you understand the core concepts and technicalities of the Huawei HCIA Datacom certification. By integrating these practice questions into your study routine, you can effectively enhance your exam readiness and boost your confidence.

Our practice tests are carefully constructed to mimic the format and difficulty of the actual Huawei H12-811 exam. These practice questions provide an invaluable opportunity to test your knowledge in a simulated exam environment, allowing you to identify areas of strength and those needing improvement. Regularly engaging with these tests will help you solidify your understanding of the necessary topics, from network basics to advanced data communication technologies.

Moreover, using real exam questions and answers as part of your preparation strategy is crucial. They not only prepare you for the type of questions you’ll encounter but also help you apply theoretical knowledge in practical scenarios. This approach is especially beneficial for grasping complex concepts relevant to the Huawei HCIA Datacom H12-811 exam.

Investing time in our comprehensive study materials and practice tests will ensure that you are thoroughly prepared for your Huawei Certification exam. Equip yourself with the best resources to pass the Huawei H12-811 exam and step confidently into the field of data communications.

Take other online exams

Question #1
If Proto of a route displayed in the routing table is Direct, the preference of the route must be 0.
A. TRUE
B. FALSE
View answer
Correct Answer: B

View The Updated H12-811 Exam Questions

SPOTO Provides 100% Real H12-811 Exam Questions for You to Pass Your H12-811 Exam!

Question #2
If the broadcast address of a network is 172.16.1.255, which of the following addresses is the network address?
A. 172
B. 172
C. 172
D. 172
View answer
Correct Answer: C
Question #3
Which of the following network types does OSPF support?
A. Broadcast
B. Non-Broadcast Multi-Access
C. Point-to-Point
D. Point-to-Multipoint
View answer
Correct Answer: ABCD
Question #4
A company applies for a class C IP address for subnetting, it has eight branches. The largest branch has a subnet and should support at least 14 hosts. What would be an appropriate subnet mask?
A. 255
B. 255
C. 255
D. 255
View answer
Correct Answer: C
Question #5
A company applies for a class C IP address for subnetting. It has six branches and the largest branch should have 26 hosts. What would be an appropriate subnet mask for the largest branch?
A. 255
B. 255
C. 255
D. 255
View answer
Correct Answer: B
Question #6
Which of the following are features of the OSPF protocol?
A. The shortest path is calculated based on the number of hops
B. Triggered update is supported
C. Area division is supported
D. Routing loops are likely to occur
View answer
Correct Answer: BC
Question #7
On the network shown in the figure, the router receives a data packet with the destination IP address 11.0.12.1 from host A. After the packet is forwarded by the router, which of the following are the destination MAC address and destination ip address of the data packet?
A. AC-D,10
B.
C. MAC-D,11
D. MAC-B,11
View answer
Correct Answer: D
Question #8
Which of the following statements is false about OSPF area partition?
A. Only area border routers (ABRs) can function as the autonomous system boundary routers (ASBRs)
B. The link state databases (LSDBs) of routers are the same in the same OSPF area
C. OSPF area partition can reduce the LSDB size of the router
D. Area 0 is the backbone area, and other areas must be connected to this area
View answer
Correct Answer: A
Question #9
In the following figure, after the OSPF routers converge, in which state is the OSPF neighbor relationship between Router A and Router B?
A. own
B.
C. Attempt
D. 2-way
View answer
Correct Answer: B
Question #10
If the application-layer protocol is Telnet, what is the value of the "Protocol" field in the IPv4 header?
A. 53
B. 6
C. 67
D. 17
View answer
Correct Answer: B
Question #11
The priority of static routes cannot be manually specified.
A. TRUE
B. FALSE
View answer
Correct Answer: A
Question #12
Which of the following statements are true about the default route?
A. The default route can only be manually configured by the administrator
B. If the destination address of a packet does not match any entry in the routing table, the packet is forwarded through the default route
C. In a routing table, the route to 0
D. The routing table of any router must contain the default route
View answer
Correct Answer: BC
Question #13
Dynamic routing protocols can automatically adapt to network topology changes.
A. TRUE
B. FALSE
View answer
Correct Answer: A
Question #14
Which of the following statements regarding Designated Routers in OSPF are correct?
A. DR and BDR must be establish adjacency relationship
B. If the priorities of two routers are different, the router with the lower priority will be elected as DR
C. If the priorities of two routers are equal, the router with the higher Router ID will be elected as DR
D. DR is elected by all the routers in the same network segment
View answer
Correct Answer: ACD
Question #15
An Eth-Trunk interface can be used only as a Layer 2 interface.
A. TRUE
B. FALSE
View answer
Correct Answer: B

View The Updated Other Exam Questions

SPOTO Provides 100% Real Other Exam Questions for You to Pass Your Other Exam!

View Answers after Submission

Please submit your email and WhatsApp to get the answers of questions.

Note: Please make sure your email ID and Whatsapp are valid so that you can get the correct exam results.

Email:
Whatsapp/phone number: