According to the following configuration example, the following statement is correct (). [AC] dhcp enable [AC] interface VLANif100 [AC-VLANif100] ip address 10.1.100.1 24 [AC-VLANif100] dhcp select interface [AC-VLANif100] quit
A. AThe DHCP service is already enabled by default in the global mode, so dhcp enable does not need to be configured
B. BThe dhcp select interface command is to enable the DHCP client function on the VLAN 100 interface
C. CIf VLAN100 is a user VLAN, after the user receives the address, the gateway is 10
D. DIf VLAN100 is the management VLAN where the AP is located, the option 43 field in the DHCP message that the AP will receive should be 10