Free HP HPE7-A02 Practice Questions & Answers 2026 Part2 | Aruba Certified

A company lacks visibility into the many different types of user and loT devices deployed in itsinternal network, making it hard for the security team to addressthose devices.Which HPE Aruba Networking solution should you recommend to resolve this issue?

A company has HPE Aruba Networking APs running AOS-10 and managed by HPE Aruba Networking Central. The company also has AOS-CX switches. The security team wants you to capture traffic from a particular wireless client. You should capture this client's traffic over a 15-minute time period and then send the traffic to them in a PCAP file. What should you do?

A company has Aruba APs that are controlled by Central and that implement WIDS. When you check WIDS events, you see a "detect valid SSID misuse" event. What can you interpret from this event, and what steps should you take?

Assume that an AOS-CX switch is already implementing DHCP snooping and ARP inspection successfully on several VLANs.What should you do to help minimize disruption time if the switch reboots?

A company wants HPE Aruba Networking ClearPass Policy Manager (CPPM) to respond to Syslog messages from its Palo Alto Next Generation Firewall (NGFW)by quarantining clients involved in security incidents.Which step must you complete to enable CPPM to process the Syslogs properly?

You have configured an AOS - CX switch to implement 802.1X on edge ports. Assume ports operate in the default auth - mode. VolP phones are assigned to the "voice" role and need to send traffic that is tagged for VLAN 12. Where should you configure VLAN 12?

You have created this rule in an HPE Aruba Networking ClearPass Policy Manager (CPPM) service’s enforcement policy. IF Authorization [Endpoints Repository] Conflict EQUALS true THEN apply “quarantine_profile”What information can help you determine whether you need to configure cluster-wide profiler parameters to ignore some conflicts?

You are setting up HPE Aruba Networking SSE. Which use case requires you to apply a non- default device posture in a rule?

An admin has configured an AOS - CX switch with these settings port - access role employees vlan access name employees This switch is also configured with CPPM as its RADIUS server. Which enforcement profile should you configure on CPPM to work with this configuration?

You have installed an HPE Aruba Networking Network Analytic Engine (NAE) script on an AOS-CX switch to monitor a particular function.Which additional step must you complete to start the monitoring?

Refer to Exhibit.

An admin has configured an AOS-CX switch with these settings: port-access role employees vlan access name employees This switch is also configured with CPPM as its RADIUS server. Which enforcement profile should you configure on CPPM to work with this configuration?

A port-access role for AOS-CX switches has this policy applied to it:The company wants to permit clients in this role to access 10.2.12.0/24 with HTTPS.What should you do?

A company has AOS-CX switches and HPE Aruba Networking APs, which run AOS-10 and bridge theirSSIDs. Company security policies require 802.1X on alledge ports, some of which connect to APs.How should you configure the auth-mode on AOS-CX switches?

You need to set up HPE Aruba Networking ClearPass Policy Manager (CPPM) to provide certificate - based authentication of 802.1X supplicants. How should you upload the root CA certificate for the supplicants' certificates?

You are setting up HPE Aruba Networking SSE. Which use case requires you to apply a non-default posture in a rule?

Refer to the exhibit.You are reviewing packets in Wireshark. The capture shows traffic from source IP address10.1.14.10 to several destinations in the 10.1.15.0/24 network. The packets use TCP flags FIN, PSH, and URG together.What can you interpret from the packets that you see here?

A company wants you to create a custom device fingerprint on CPPM with rules for profiling a group of specialized devices. What is one requirement?

You have created this rule in an HPE Aruba Networking ClearPass Policy Manager (CPPM) service's enforcement policy: IF Authorization [Endpoints Repository]Conflict EQUALS true THEN apply "quarantine_profile"What information can help you determine whether you need to configure cluster-wide profiler parameters to ignore some conflicts?

You manage AOS-10 APs with HPE Aruba Networking Central. A role is configured on these APs with these rules:1. Allow udp on port 67 to any destination2. Allow any to network 10.1.6.0/233. Deny any to network 10.1.0.0/16 + log4. Deny any to network 10.0.0.0/85. Allow any to any destinationYou add this new rule immediately before rule 2:Deny ssh to network 10.1.4.0/23 + denylistAfter this change, what happens when a client assigned to this role sends SSH traffic to 10.1.11.42?

A company has HPE Aruba Networking gateways that implement gateway IDS/IPS. Admins sometimes check the Security Dashboard, but they want a faster way to discover if a gateway starts detecting threats in traffic. What should they do? 1. The Need for Faster Threat Notifications Admins need immediate alerts when threats are detected by the gateway's IDS/IPS functionality. Regularly checking the Security Dashboard is inefficient, so an automated notification system is essential for faster response times. 2. Explanation of Each Option A . Set up Webhooks that are attached to the HPE Aruba Networking Central Threat Dashboard: Incorrect: Webhooks are useful for integrating alerts with third-party tools or custom workflows. However, setting up email notifications through global alert settings is faster and simpler for this purpose. B . Use Syslog to integrate the gateways with HPE Aruba Networking ClearPass Policy Manager (CPPM) event processing: Incorrect: Syslog integration with CPPM is typically used for logging and correlating events, not for real-time notifications about threats. CPPM is better suited for policy enforcement, not instant threat alerts. C . Set up email notifications using HPE Aruba Networking Central's global alert settings: Correct: HPE Aruba Networking Central has global alert settings that allow admins to configure email notifications for specific events, such as threat detection. This is the simplest and most effective way to ensure admins receive immediate notifications when threats are detected by the gateways. D . Integrate HPE Aruba Networking ClearPass Device Insight (CPDI) with Central and schedule hourly reports: Incorrect: While CPDI integration provides enhanced device profiling, it is not directly tied to gateway IDS/IPS threat detection. Hourly reports are not real-time notifications and would not meet the requirement for faster threat alerts. Final Recommendation Setting up email notifications through HPE Aruba Networking Central's global alert settings provides the most direct and efficient solution for immediate threat detection alerts. Reference HPE Aruba Networking Central Alert Management Documentation. Aruba IDS/IPS and Security Dashboard Configuration Guide. Email Notification Setup for Aruba Central Threat Alerts.

A port-access role for AOS-CX switches has this policy applied to it:The company wants to permit clients in this role to access 10.2.12.0/24 with HTTPS.What should you do?

Refer to the exhibit. All of the switches in the exhibit are AOS-CX switches. What is the preferred configuration on Switch-2 for preventing rogue OSPF routers in this network?

A company needs you to integrate HPE Aruba Networking ClearPass Policy Manager (CPPM) with HPE Aruba Networking ClearPass Device Insight (CPDI). What is one task you should do to prepare?

You have configured an AOS-CX switch to implement 802.1X on edge ports. Assume ports operate in the default auth-mode. VoIP phones are assigned to the "voice" role and need to send traffic that is tagged for VLAN 12. Where should you configure VLAN 12?

You need to create a rule in an HPE Aruba Networking ClearPass Policy Manager (CPPM) role mapping policy that

A company is implementing HPE Aruba Networking Wireless IDS/IPS (WIDS/WIPS) on its AOS-10 APs, which are managed in HPE Aruba Networking Central. What is one requirement for enabling detection of rogue APs? To enable the detection of rogue APs with HPE Aruba Networking Wireless IDS/IPS (WIDS/WIPS) on AOS-10 APs managed in HPE Aruba Networking Central, each AP must have a Foundation with Security license. This license enables advanced security features, including rogue AP detection, which is crucial for maintaining a secure wireless environment and protecting against unauthorized access points.

You are configuring an HPE Aruba Networking VIA solution for a customer. The customer wants this behavior for remote clients that connect to the VPN: They forward internet traffic locally. They forward traffic destined to the data center over the VPN. How can you configure this behavior? The requirement describes split tunneling. Internet-bound traffic should remain local at the remote client, while traffic destined for corporate data center networks should traverse the VPN tunnel. In Aruba VIA, this behavior is configured in the VIA Connection Profile by enabling split tunneling and defining which destination networks should be tunneled. Adding the data center networks to the tunneled networks list ensures only those corporate routes are sent through the VPN. Firewall roles control access permissions after authentication, but they are not the primary place to define the VIA client's split-tunnel routing behavior. VPN pools assign client IP addresses, not destination routing rules. Therefore, split tunneling in the VIA Connection Profile is the correct configuration. ===============

What is one use case for implementing user-based tunneling (UBT) on AOS-CX switches?

A company has an HPE Aruba Networking ClearPass cluster with several servers. ClearPass Policy Manager (CPPM) is set up to:. Update client attributes based on Syslog messages from third-party appliances. Have the clients reauthenticate and apply new profiles to the clients based on the updates To ensure that the correct profiles apply, what is one step you should take?

A company is using HPE Aruba Networking ClearPass Device Insight (CPDI) (the standaloneapplication). In the CPDI security settings, Security Analysis is On,the Data Source is ClearPass Devices Insight, and Enable Posture Assessment is On. You see thatdevice has a Risk Score of 90.What can you know from this information?