DON'T WANT TO MISS A THING?

Certification Exam Passing Tips

Latest exam news and discount info

Curated and up-to-date by our experts

Yes, send me the newsletter

Free Fortinet NSE4_FGT_AD-7.6 Practice Questions & Answers 2026 Part2 | Fortinet NSE 4 - FortiOS 7.6 Administrator

Are you preparing for the Fortinet NSE 4 - FortiOS 7.6 Administrator certification exam? SPOTO offers the Fortinet NSE 4 - FortiOS 7.6 Administrator Premium File; all questions are aligned with the latest exam content and come with expert-provided answers. Our question banks cover the latest question types, core concepts, and detailed explanations, helping you familiarize yourself with the exam format and difficulty level. Whether you are reviewing core concepts or simulating a real exam environment, these resources will rapidly boost your confidence and readiness.
For over two decades, SPOTO has successfully helped numerous IT professionals secure their ideal positions at Fortune 500 companies. Download now to start practicing efficiently and ensure a high score on the actual exam. Don't miss this opportunity to pass your certification exam with ease!
Take other online exams
Question #1
An administrator wants to configure dead peer detection (DPD) on IPsec VPN for detecting dead tunnels. The requirement is that FortiGate sends DPD probes only when there is no inbound traffic.Which DPD mode on FortiGate meets this requirement?
A. On Demand
B. Enabled
C. On Idle
D. Disabled
View answer
Correct Answer: A
Question #2
You have configured an application control profile, set peer-o-peer traffic to Block under the Categories tab, and applied it to the firewall policy. However, you peer-to-peer traffic on known ports is passing through the FortiGate without being blocked. What FortiGate settings should you check to resolve this issue?
A. eplacement Messages for UDP-based Applications
B. etwork Protocol Enforcement
C. ortiGuard category ratings
D. pplication and Filter Overrides
View answer
Correct Answer: D
Question #3
Refer to the exhibit.An SD-WAN zone configuration on the FortiGate GUI is shown. Based on the exhibit, which statement is true?
A. The Underlay zone contains no member
B. The virtual-wan-link and overlay zones can be deleted
C. The Underlay zone is the zone by default
D. port2 and port3 are not assigned to a zone
View answer
Correct Answer: A
Question #4
You have created a web filter profile named restrict_media-profile with a daily category usage quota.When you are adding the profile to the firewall policy, the restrict_media-profile is not listed in the available web profile drop down.What could be the reason?
A. The inspection mode in the firewall policy is not matching with web filter profile feature set
B. The web filter profile is already referenced in another firewall policy
C. The naming convention used in the web filter profile is restricting it in the firewall policy
D. The firewall policy is in no-inspection mode instead of deep-inspection
View answer
Correct Answer: A
Question #5
Refer to the exhibit.Which two statements about the FortiGuard connection are true? (Choose two.)
A. The weight increases as the number of failed packets rises
B. You can configure unreliable protocols to communicate with FortiGuard Server
C. FortiGate identified the FortiGuard Server using DNS lookup
D. FortiGate is using the default port for FortiGuard communication
View answer
Correct Answer: AD
Question #6
What are two features of FortiGate FSSO agentless polling mode? (Choose two.)
A. FortiGate uses the AD server as the collector agent
B. FortiGate uses the SMB protocol to read the event viewer logs from the DCs
C. FortiGate does not support workstation check
D. FortiGate directs the collector agent to use a remote LDAP server
View answer
Correct Answer: BC
Question #7
What are two features of FortiGate FSSO agentless polling mode? (Choose two.)
A. FortiGate uses the AD server as the collector agent
B. FortiGate uses the SMB protocol to read the event viewer logs from the DCs
C. FortiGate does not support workstation check
D. FortiGate directs the collector agent to use a remote LDAP server
View answer
Correct Answer: BC
Question #8
Refer to the exhibit.An SD-WAN zone configuration on the FortiGate GUI is shown. Based on the exhibit, which statement is true?
A. The Underlay zone contains no member
B. The virtual-wan-link and overlay zones can be deleted
C. The Underlay zone is the zone by default
D. port2 and port3 are not assigned to a zone
View answer
Correct Answer: A
Question #9
Refer to the exhibit.Based on the routing table shown in the exhibit, which two statements are true? (Choose two.)
A. A packet with the source IP address 10
B. A packet with the source IP address 10
C. A packet with the source IP address 10
D. A packet with the source IP address 10
View answer
Correct Answer: AB
Question #10
An administrator wants to form an HA cluster using the FGCP protocol.Which two requirements must the administrator ensure both members fulfill? (Choose two.)
A. They must have the same hard drive configuration
B. They must have the same number of configured VDOMs
C. They must have the heartbeat interfaces in the same subnet
D. They must have the same HA group I
View answer
Correct Answer: BD
Question #11
Refer to the exhibit.Which two statements about the FortiGuard connection are true? (Choose two.)
A. The weight increases as the number of failed packets rises
B. You can configure unreliable protocols to communicate with FortiGuard Server
C. FortiGate identified the FortiGuard Server using DNS lookup
D. FortiGate is using the default port for FortiGuard communication
View answer
Correct Answer: AD
Question #12
An administrator wants to form an HA cluster using the FGCP protocol. Which two requirements must the administrator ensure both members fulfill? (Choose two answers)
A. They must have the same HA group ID
B. They must have the heartbeat interfaces in the same subnet
C. They must have the same number of configured VDOMs
D. They must have the same hard drive configuration
View answer
Correct Answer: AD
Question #13
Refer to the exhibit.An administrator has created a new firewall address to use as the destination for a static route. Why is the administrator not able to select the new address in the Destination field of the new static route? (Choose one answer)
A. n the new static route, the administrator must first set the interface to port2
B. n the new firewall address, the FQDN address must first be resolved
C. n the new static route, the administrator must select Named Address
D. n the new firewall address, Routing configuration must be enabled
View answer
Correct Answer: D
Question #14
Which three statements about SD-WAN performance SLAs are true? (Choose three.)
A. They can be measured actively or passively
B. They are applied in a SD-WAN rule lowest cost strategy
C. They monitor the state of the FortiGate device
D. All the SLA targets can be configured
E. They rely on session loss and jitter
View answer
Correct Answer: ABD
Question #15
An administrator wants to configure dead peer detection (DPD) on IPsec VPN for detecting dead tunnels. The requirement is that FortiGate sends DPD probes only when there is no inbound traffic.Which DPD mode on FortiGate meets this requirement?
A. On Demand
B. Enabled
C. On Idle
D. Usabled
View answer
Correct Answer: A
Question #16
Refer to the exhibit.FortiGate has two separate firewall policies for Sales and Engineering to access the same web server with the same security profiles.Which action must the administrator perform to consolidate the two policies into one?
A. Select port1 and port2 subnets in a single firewall policy
B. Create an Aggregate interface that includes port1 and port2 to create a single firewall policy
C. Replace port1 and port2 with the any interface in a single firewall policy
D. Enable Multiple Interface Policies to select port1 and port2 in the same firewall policy
View answer
Correct Answer: D
Question #17
FortiGate is operating in NAT mode and has two physical interfaces connected to the LAN and DMZ networks respectively.Which two statements about the requirements of connected physical interfaces on FortiGate are true? (Choose two.)
A. Both interfaces must have directly connected routes on the routing table
B. Both interfaces must have IP addresses assigned
C. Both interfaces must have DHCP enabled and interfaces set to LAN and DMZ roles assigned
D. Both interfaces must have the interface role assigned
View answer
Correct Answer: AB
Question #18
Which two features of IPsec IKEv1 authentication are supported by FortiGate? (Choose two.)
A. No certificate is required on the remote peer when you set the certificate signature as the authentication method
B. Extended authentication (XAuth) for faster authentication because fewer packets are exchanged
C. Extended authentication (XAuth) to request the remote peer to provide a username and password
D. Pre-shared key and certificate signature as authentication methods
View answer
Correct Answer: CD
Question #19
There are multiple dialup IPsec VPNs configured in aggressive mode on the HQ FortiGate. The requirement is to connect dial-up users to their respective department VPN tunnels.Which phase 1 setting you can configure to match the user to the tunnel?
A. ocal Gateway
B. ead Peer Detection
C. KE Mode Config
D. eer ID
View answer
Correct Answer: D
Question #20
Refer to the exhibits.You have implemented the application sensor and the corresponding firewall policy as shown in the exhibits.Which two factors can you observe from these configurations? (Choose two.)
A. YouTube search is allowed based on the Google Application and Filter override settings
B. Facebook access is blocked based on the category filter settings
C. Facebook access is allowed but you cannot play Facebook videos based on Video/Audio category filter settings
D. YouTube access is blocked based on Excessive-Bandwidth Application and Filter override settings
View answer
Correct Answer: AB
Question #21
An administrator wants to form an HA cluster using the FGCP protocol.Which two requirements must the administrator ensure both members fulfill? (Choose two.)
A. They must have the same hard drive configuration
B. They must have the same number of configured VDOMs
C. They must have the heartbeat interfaces in the same subnet
D. They must have the same HA group I
View answer
Correct Answer: BD
Question #22
Refer to the exhibit.Which two statements about the FortiGuard connection are true? (Choose two.)
A. The weight increases as the number of failed packets rises
B. You can configure unreliable protocols to communicate with FortiGuard Server
C. FortiGate identified the FortiGuard Server using DNS lookup
D. FortiGate is using the default port for FortiGuard communication
View answer
Correct Answer: AD

View The Updated Fortinet Exam Questions

SPOTO Provides 100% Real Fortinet Exam Questions for You to Pass Your Fortinet Exam!

Get Fortinet Practice Test

View Answers after Submission

Please submit your email and WhatsApp to get the answers of questions.

Note: Please make sure your email ID and Whatsapp are valid so that you can get the correct exam results.

Email:
Whatsapp/phone number:
Contact Us


Copyright © 2024. Designer by SPOTO Official Website. All Rights Reserved.