Free CCNP 300-610 DCID Exam Practice Questions - Cisco Certification Prep and Test Sample Questions

A Cisco engineer is configuring a customer design scenario that consists of Cisco Nexus 7000 series switches. The remote management access of all the Layer 2 switches is configured on a specific VLAN 12, with subnet 10.0.12.0/24. The route goes through a firewall that has rules to restrict traffic to/from VLAN 12. The engineer is adding a Nexus 3064 with the primary use as a core router for the VLANs. How must the engineer specify the management VRF to Use VLAN12 for management so it is on the same subnet as the rest of the LAN switches?

A data center with over 4000 VLANs must be stretched to a disaster recovery site. The solution must support the migration of virtual machines to a disaster recovery site. To support the scalability of the solution, the internal fabric of the main site must be from the DCI network. The connecting network infrastructure uses a 10 Gbps link with PIM ASM supported, which will be replaced with a different overlay in the next 12 months. The solution must support head-end replication for broadcast, unknown unicast, and multicast traffic. Which solution must be used to meet these requirements?

An engineer must design a disaster recovery solution for a Cisco ACI Multi-Site network One requirement is that the applications must have seamless IP addressing across sites. The solution must also be highly resilient and support Layer 2 adjacency. Which design meets these requirements?

An architect needs vendor-agnostic technology to orchestrate and automate a customer network with scripts. The technology must support running ad-hoc scripts from the CLI and support a deployment of scripts based on a large, readily available set the scripts. The technology must support running architect choose?

An engineer deploys VMware ESXi hypervisor on blade servers. The virtual networking is managed by Cisco Nexus 1000V Series Switches. Which configuration aligns with Cisco recommended practices for providing high availability and a maximum throughput to the VMware ESXi hosts?

An engineer seeks a solution to retrieve routing information from Cisco Nexus switches. The data must be exported to a web application in a JSON or XML data format for monitoring and must be encrypted during transmission. The solution must not require extensive knowledge to support and should be simple to implement. Which technology accomplishes these goals?

A storage administrator receives reports of network delays when database software attempts to access the storage array. The virtual machines that host the database software are installed on different rack servers connected to the Cisco UCS Fabric Interconnect domain. The existing SAN switches are connected to the Fabric Interconnects using two 8 Gb port-channel interfaces to connect the storage array. The storage administrator has decided to deploy iSCSI storage with four 10 Gbps interfaces connected to the Cisco UCS Fabric Interconnects. Which deployment type resolves the problems with storage contention?

A storage administrator experiences a slow file transfer rate when archiving backup files on a tape library drive. The tape drive is connected directly to the Cisco Nexus 7009 switches. The file transfer rate gradually goes down with files that are over 100 GB in size. The requirement is for the file transfer rate to be consistent during the transfer window. Which two solutions meet this requirement? (Choose two.)

Which type of Cisco Intersight workflow input controls the availability of other specific workflow inputs during the execution of a workflow?

An engineer must interconnect two data centers to support the dynamic virtual machine migration. The data centers are currently interconnected using an IPv4 network. However, the data plane encapsulation of the underlay network is expected to change next year. To meet the VM migration requirement, the solution must track MAC route changes, update all other remote devices simultaneously and prevent excessive MAC flapping with broadcast and unicast traffic loops. The company must also use networking equipment from different manufacturers to prevent vendor-locking. Which solution meets these requirements?