DON'T WANT TO MISS A THING?

Certification Exam Passing Tips

Latest exam news and discount info

Curated and up-to-date by our experts

Yes, send me the newsletter

Dominate CCNP 350-601 Mock Tests & Study Materials, Cisco Data Center 350-601 DCCOR | SPOTO

Prepare comprehensively for the Cisco Data Center 350-601 DCCOR exam with our dominant mock tests and study materials. This 120-minute exam is pivotal for CCNP and CCIE Data Center Certifications, assessing candidates' proficiency in implementing core data center technologies such as network, compute, storage network, automation, and security. Our practice tests offer a thorough review of exam topics and scenarios, enabling effective preparation. Access our exam dumps, sample questions, and exam materials to enhance your study experience. Utilize our exam simulator and online exam questions for interactive exam practice. With our high-quality mock exams and study resources, you can dominate the Cisco Data Center 350-601 DCCOR exam and achieve certification success.
Take other online exams
Question #1
In an FCoE environment, for which two sets of data must an interface that implements the PAUSE mechanism always provision sufficient ingress buffer? (Choose two.)
A. frames that were sent with high credit
B. frames that were sent on the link but not yet received C
E. frames that were sent on the link and received
View answer
Correct Answer: A

View The Updated 350-601 Exam Questions

SPOTO Provides 100% Real 350-601 Exam Questions for You to Pass Your 350-601 Exam!

Get 350-601 Practice Test
Question #2
An engineer is converting a Cisco MDS switch to support NPIV mode. What should be considered when implementing the solution?
A. It requires mapping of external interface traffic
B. It must be enabled on VSAN 1 only
View answer
Correct Answer: A
Question #3
A POAP-enabled Cisco Nexus switch will not enter POAP mode. Which two conditions should be verified? (Choose two.)
A. No startup configuration is available
B. The switch is in bootup process
E. No Cisco NX-OS image is present on the bootflash
View answer
Correct Answer: B
Question #4
An engineer is implementing FCoE. Which aspect of DCBXP on a Cisco Nexus switch affects this implementation?
A. It requires that LLDP transmit and LLDP receive are enabled on the FCoE interface
B. It uses the Cisco Fabric Services protocol to exchange parameters between two peer links
View answer
Correct Answer: D
Question #5
Which statement is true about upgrading the firmware on a Cisco MDS storage switch with dual supervisors? A.Supervisors can be upgraded independently to test the new firmware.
B. The new firmware is loaded on the standby supervisor first
View answer
Correct Answer: CD
Question #6
An engineer must configure FCoE on a Cisco Nexus switch. Which two command sets complete this configuration? (Choose two.)
A. vsan database vsan 10 interface vfc 10
B. interface vfc 10 bind interface ethernet 1/3 no shut C
E. interface fcoe 10 bind interface ethernet 1/3 no shut
View answer
Correct Answer: A
Question #7
Which configuration statically assigns VSAN membership to a virtual Fibre Channel interface?
A. switch(config-vsan-db)# vsan 100 interface vfc 31
B. switch(config-vsan-db)# vsan 100 fc 3/1 C
View answer
Correct Answer: A
Question #8
An engineer is configuring a VSAN on the network. Which option must be selected to create the VSAN?
A. Common/Global B
View answer
Correct Answer: AD
Question #9
Which two methods are available to manage an ACI REST API session authentication when a user is unauthenticated? (Choose two.)
A. POST to aaaUserLogin
B. GET to aaaListDomains C
E. POST to aaaLogin
View answer
Correct Answer: BD
Question #10
Which two actions should be taken before an upgrade is started on a Cisco MDS switch? (Choose two.)
A. disable Cisco Fabric Services
B. check the impact of the upgrade using the show install all impact command C
E. back up the configuration
View answer
Correct Answer: A
Question #11
What is required for using Puppet in a Cisco NX-OS environment? A.OpenNP
B. XML management interface C
View answer
Correct Answer: BE
Question #12
A Cisco MDS 9000 Series Storage Switch has reloaded unexpectedly. Where does the engineer look for the latest core dump file? A./mnt/recovery B./mnt/core C./mnt/logs D./mnt/pss
A Cisco MDS 9000 Series Storage Switch has reloaded unexpectedly. Where does the engineer look for the latest core dump file? A
View answer
Correct Answer: BE
Question #13
What are two types of FC/FCoE oversubscription ratios? (Choose two.)
A. switch processing power to end-node processing power
B. port bandwidth to uplink bandwidth C
E. host bandwidth to storage bandwidth
View answer
Correct Answer: B
Question #14
An engineer implements SPAN configuration on an Nexus 5000 series switch. Which two commands are necessary to complete the SPAN session configuration?
A. Configure switchport speed 4000 under interface fc2/2
B. Configure the switchport monitor under interface fc2/2
E. Configure the switchport mode SD under interface fc2/2
View answer
Correct Answer: A
Question #15
Which two components should be checked when a Cisco Nexus 9000 Series Switch fails to boot using POAP? (Choose two.)
A. POAP feature license
B. DHCP server to bootstrap IP information C
E. TFTP server that contains the configuration script
View answer
Correct Answer: C
Question #16
An engineer must ensure fabric redundancy when implementing NPV mode on a Cisco MDS 9000 Series Switch. Which action enables fabric redundancy?
A. Use TE ports to connect to upstream switches
B. Add a port channel to upstream switches
View answer
Correct Answer: B
Question #17
An engineer is implementing zoning on two Cisco MDS switches. After the implementation is finished, E Ports that connect the two Cisco MDS switches become isolated. What is wrong with the implementation?
A. Zones are local to the MDS switch and name service must be used to activate the connection between E Ports
B. Different zone set names must be configured on both MDS switches
View answer
Correct Answer: B
Question #18
What is a recommended design choice in a topology for multipathing iSCSI traffic?
A. single initiator to dual targets
B. two NICs bonded together on the initiator C
View answer
Correct Answer: AB
Question #19
What is an advantage of using Ansible for automation as compared to Puppet and Chef?
A. Ansible performs automation without installing a software agent on the target node
B. Ansible abstracts a scenario so that one set of configuration settings can be used across multiple operating systems
View answer
Correct Answer: AE
Question #20
The FCoE technology is used in a data center and the MDS switches are configured as Fibre Channel Forwarders. Which configuration should be applied to an MDS switch in order to be used as the best switch to connect by the CNAs in the fabric? A.fcoe fcf-priority 512 B.fcoe fcf-priority 0 C.no fcoe fcf-priority D.fcoe fcf-priority 1024
The FCoE technology is used in a data center and the MDS switches are configured as Fibre Channel Forwarders. Which configuration should be applied to an MDS switch in order to be used as the best switch to connect by the CNAs in the fabric? A
View answer
Correct Answer: A
Question #21
An administrator needs to configure an automated policy to shut down a link when a given threshold is exceeded on MDS switch. Which feature needs to be used? A.RMON B.EEM C.Call Home D.Scheduler
View answer
Correct Answer: B
Question #22
Which statement describes the MAC address that the FCoE Initialization Protocol chooses for use by an E-Node in an FCoE implementation?
A. The FCoE Initialization Protocol uses a 24-bit FC-MAP and concatenates a 24-bit Fibre Channel ID to create a fabric-provided MAC address
B. The FCoE Initialization Protocol uses the burned-in MAC address of the converged network adapter for all FCoE operations
View answer
Correct Answer: BD
Question #23
An engineer must implement a Cisco UCS system at a customer site. One of the requirements is to implement SAN boot. The storage system maps the source WWPN to a unique LUN. Which method does Cisco recommend to configure the SAN boot?
A. Define the vHBAs as bootable and leave the boot target definition empty
B. Create a SAN boot policy in which every initiator is mapped to a different target LUN
View answer
Correct Answer: D
Question #24
What is an advantage of NFS as compared to Fibre Channel?
A. NFS removes the impact of IP overhead
B. NFS enables thin provisioning for LUNs
View answer
Correct Answer: D
Question #25
Which product includes prebuilt templates that are available to be used to customize fabric deployments?
A. Cisco Tetration
B. Cisco Data Center Network Manager C
View answer
Correct Answer: D
Question #26
Which statement describes monitoring Fibre Channel traffic on a Cisco UCS 6332 Fabric Interconnect?
A. Fibre Channel traffic is monitored only on one vHBA per server
B. Fibre Channel traffic is capable to be monitored as it is encapsulated as FCoE
View answer
Correct Answer: DE
Question #27
Why does the Python code for Cisco NX-API print an error message?
A. The JSON is not a supported format for the NX-API
B. The "type" is wrong in the header of the request and should be "cli_conf" C
View answer
Correct Answer: CE
Question #28
An engineer is implementing NPV mode on a Cisco MDS 9000 Series Switch. Which action must be taken?
A. NPIV must be enabled on the upstream switch
B. The FCNS database must be disabled in the fabric
View answer
Correct Answer: A
Question #29
A customer has a requirement for an automation solution that supports periodically acquiring configuration from a centralized server and aligning UCS servers to their desired state. Which open-source tool meets this requirement? A.SaltStack B.Kubernetes C.Puppet D.Terraform
A customer has a requirement for an automation solution that supports periodically acquiring configuration from a centralized server and aligning UCS servers to their desired state. Which open-source tool meets this requirement? A
View answer
Correct Answer: B
Question #30
An engineer is configuring a vHBA template in UCS Manager. The engineer needs to specify the logical addresses used by the vHBA and the path through which the SAN traffic flows. Which two resources must be specified in the vHBA template? (Choose two.)
A. MAC addresses B
View answer
Correct Answer: B
Question #31
Which two statements describe modifying Cisco UCS user accounts? (Choose two.)
A. Disabling a user account maintains all of the data in the Cisco UCS Fabric Interconnect
B. The admin account is used only to log on by using SSH
E. The password of the user account expires in 30 days
View answer
Correct Answer: A
Question #32
What is required for using Ansible with HTTP/HTTPS protocol in a Cisco NX-OS environment?
A. XML management interface B
View answer
Correct Answer: D
Question #33
An engineer configures FCIP on a Cisco MDS 9000 Series switch. What is the result of implementing the configuration?
A. The switch attempts to make two TCP connections
B. Compression is performed by using hardware
View answer
Correct Answer: C

View Answers after Submission

Please submit your email and WhatsApp to get the answers of questions.

Note: Please make sure your email ID and Whatsapp are valid so that you can get the correct exam results.

Email:
Whatsapp/phone number:


Copyright © 2024. Designer by SPOTO Official Website. All Rights Reserved.