DON'T WANT TO MISS A THING?

Certification Exam Passing Tips

Latest exam news and discount info

Curated and up-to-date by our experts

Yes, send me the newsletter

Dominate CCNP 300-420 Mock Tests & Study Materials, Cisco Enterprise Networks | SPOTO

Dominate the challenging 300-420 ENSARI exam with SPOTO's expertly crafted mock tests and comprehensive study materials. Our practice tests feature a wide array of realistic exam questions covering advanced routing, enterprise campus networks, WAN, security services, network services, and SDA to ensure you're thoroughly prepared. Get unlimited access to free exam dumps with detailed answers that reinforce your understanding. Test your skills in an authentic environment with our online exam simulator, while identifying knowledge gaps through regular exam practice. Don't leave your 300-420 certification to chance - leverage SPOTO's high-quality mock exams, sample questions, and in-depth preparation resources to confidently master the exam objectives.
Take other online exams
Question #1
Which of the following statements best describes the purpose of ARP with respect to CEF?
A. ARP is used to build the FIB
B. ARP is used to reindex the routing table
C. ARP is used to build the adjacency table
D. ARP is used to decrease the amount of time spent searching for an entry within a routing table
View answer
Correct Answer: C
Question #2
When provisioning bandwidth for an IP telephony network, which elements are unique to an IP telephony call? (Choose two.)
A. voice stream
B. IGMP packets
C. call-control signaling
D. routing protocol packets
E. speed of the segment to the telephone
View answer
Correct Answer: AC
Question #3
Refer to the following partial output of the show spanning-tree command. Which of the following statements are TRUE for the given output? (Choose all that apply.)
A. SW1 is the root bridge for VLAN0001
B. Fa0/2 is the root port for VLAN0001
C. The switch having the 0A61
D. The switch having the 0F2C
E. The switch connected to the Fa0/6 port of SW1 is using its root port
F. The port Fa0/4 is in a blocking state for VLAN 0121
G. The STP protocol in use is RSTP
View answer
Correct Answer: BCE
Question #4
Which command produced the following output?
A. switch# show spanning-tree vlan 100
B. switch# show vlan 100
C. switch# show spanning-tree summary
D. switch# show interface vlan 100
E. switch# show spanning-tree inconsistentports
View answer
Correct Answer: A
Question #5
In what mode does an LWAPP-enabled access point operate?
A. lightweight mode
B. autonomous mode
C. WGB
D. ad hoc mode
View answer
Correct Answer: A
Question #6
In which VTP modes can you propagate VTP advertisements and create or delete local VLANs? (Choose two.)
A. User
B. Server
C. Client
D. Private
E. Transparent
View answer
Correct Answer: BE
Question #7
Which parameters in VTP advertisements are checked before being accepted and processed? (Choose three.)
A. VLAN ID
B. Password
C. VTP mode
D. Switch name
E. Revision number
F. Management domain name
View answer
Correct Answer: BEF
Question #8
Which IOS interface configuration commands are required to configure a switch port to actively negotiate to be an 802.1Q trunk port that, when active, will send packets destined for VLAN 3 untagged? (Choose three.)
A. switchport mode trunk
B. switchport trunk dot1q 3
C. switchport native vlan 3
D. switchport trunk mode dot1q
E. switchport mode dynamic auto
F. switchport trunk native vlan 3
G. switchport trunk encapsulation dot1q AFG
View answer
Correct Answer: S
Question #9
Which characteristics apply to multilayer switching? (Choose three.)
A. Uses CPU-based packet forwarding
B. Performs collision detection
C. Provides isolation of the collision domain
D. Provides Network-layer and Transport-layer access controls
E. Determines the forwarding path based on the Network layer address
View answer
Correct Answer: CDE
Question #10
Which IOS command configures a switch for VTP client mode?
A. vtp mode client
B. no vtp v2-mode
C. no vtp mode
D. vtp terminal
View answer
Correct Answer: A
Question #11
At which OSI layer does STP operate?
A. Physical
B. Network
C. Transport
D. Data Link
View answer
Correct Answer: D
Question #12
What protocol allows for centralized management of multiple wireless access points?
A. WPA
B. WEP
C. ad hoc
D. LWAPP
View answer
Correct Answer: D
Question #13
What commands can be used to verify the trunking configuration of a router performing inter-VLAN routing? (Choose all that apply. Each correct answer is a complete solution.)
A. router# show trunk
B. router# show vlans
C. router# show vtp status
D. router# show ip interface brief
E. router# show ip route
View answer
Correct Answer: BE
Question #14
In which VTP modes can you create and delete local VLANs? (Choose two.)
A. User
B. Host
C. Client
D. Server
E. TransparentDE
View answer
Correct Answer: S
Question #15
Which of the following capabilities does a multilayer switch possess that an Access layer switch does not? (Choose all that apply.)
A. the ability to make forwarding decisions based on MAC addresses
B. the ability to make forwarding decisions based on host names
C. the ability to make forwarding decisions based on IP addresses
D. the ability to make forwarding decisions based on UDP/TCP port numbers
E. the ability to make forwarding decisions based on NetBIOS names
View answer
Correct Answer: CD
Question #16
Which IOS commands do you enter in interface configuration mode to configure a switch port to actively negotiate to be an ISL trunk port if possible? (Choose two.)
A. switchport trunk isl
B. switchport mode dynamic auto
C. switchport trunk allowed vlan
D. switchport mode dynamic desirable
E. switchport trunk encapsulation isl
View answer
Correct Answer: DE
Question #17
With RSTP hello timers set to the default interval, how quickly can a non-edge port discover that its neighbor is down?
A. 20 seconds
B. 10 seconds
C. 6 seconds
D. 5 seconds
View answer
Correct Answer: C
Question #18
Which IOS commands are entered in interface configuration mode to configure a switch port to unconditionally be an 802.1Q trunk port and not generate DTP packets? (Choose two.)
A. trunk dot1q
B. switchport trunk dot1q
C. switchport nonegotiate
D. switchport trunk allowed vlan
E. switchport trunk encapsulation dot1q
View answer
Correct Answer: CE
Question #19
What are the three RSTP port states? (Choose three.)
A. Initializing
B. Blocking
C. Learning
D. Listening
E. Forwarding
F. Discarding
View answer
Correct Answer: CEF
Question #20
How is a VLAN best described?
A. subnet
B. segment
C. collision domain
D. broadcast domain D
View answer
Correct Answer: S
Question #21
You must add a new switch to the existing network using VTP to maintain the VLAN databases. Which mode should be configured on this switch so that VLANs can be separately maintained on this switch?
A. None
B. Client
C. Server
D. Transparent
View answer
Correct Answer: D
Question #22
Which IOS command do you use to remove Layer 2 configurations and return an interface to Layer 3 mode?
A. vlan
B. no vlan
C. switchport
D. no switchport
View answer
Correct Answer: D
Question #23
Consider the following output from the show interfaces trunk command: Which two of the following statements can be confirmed regarding the trunking configuration on the switch? (Choose two.)
A. VLAN 44 is allowed on the trunk
B. VLAN 46 is not allowed on the trunk
C. VLAN 45 is configured for the VTP domain
D. VLAN 41 is not configured for the VTP domain
E. VLAN 43 is pruned or is not in the spanning-tree forwarding state
F. VLAN 41 is not pruned
View answer
Correct Answer: DE
Question #24
You have executed the following set of commands on a Layer 3 switch: You have verified that the configuration on all the physical and logical interfaces is correct. All the Layer 2 interfaces configured on the switch are in the up/up state. What is the state of the VLAN and the line protocol when you execute the show interfaces vlan 5 command?
A. administratively down/down
B. down/down
C. up/up
D. up/down
View answer
Correct Answer: C
Question #25
What command is used to enable CEF on a Cisco switch?
A. ip cef
B. ip cef distributed
C. ip route-cache cef
D. ip cef enable
View answer
Correct Answer: A
Question #26
You are the network administrator in your company. You have executed the following commands on the Fa0/1 interface of a switch named swtA: Over a period of time, different hosts are connected to the Fa0/1 switch port of swtA. The MAC addresses of the hosts that were connected to the Fa0/1 port and the order in which they connected are as follows: After a few days, you notice that the Fa0/1 port is in the shutdown state. Which of the following MAC addresses causes the Fa0/1 port to shut down?
A. 2222
B. 3333
C. 4444
D. 5555
View answer
Correct Answer: D
Question #27
You made changes to a VLAN, but the changes were not propagated to the other switches in the VTP domain. You enter a show vtp command at the switch where the changes were made, which displays the following output: What should you do to solve this problem?
A. Disable VTP pruning
B. Change the VTP operating mode to server
C. Upgrade the VTP version to version 2
D. Upgrade the VTP version to version 3
View answer
Correct Answer: B
Question #28
What feature allows the administrator to put phones into a separate logical network from the data network while keeping both in the same physical network?
A. auxiliary VLANs
B. queuing
C. 802
D. marking
View answer
Correct Answer: A
Question #29
What occurs when an untagged frame is received by an 802.1Q trunk port?
A. It discards the frame
B. It tags the frame with the identified native VLAN value
C. It forwards the frame out each port of the switch not assigned to a VLAN
D. It forwards the frame to a port belonging to the same VLAN as the native VLAN
View answer
Correct Answer: D
Question #30
By default, which VLAN is the Cisco management VLAN?
A. 1
B. 0
C. 1001
D. 1005
View answer
Correct Answer: A

View Answers after Submission

Please submit your email and WhatsApp to get the answers of questions.

Note: Please make sure your email ID and Whatsapp are valid so that you can get the correct exam results.

Email:
Whatsapp/phone number:


Copyright © 2024. Designer by SPOTO Official Website. All Rights Reserved.