DON'T WANT TO MISS A THING?

Certification Exam Passing Tips

Latest exam news and discount info

Curated and up-to-date by our experts

Yes, send me the newsletter

Comprehensive CCNA 200-301 Practice Tests and Exam Resources, Cisco Certified Network Associate | SPOTO

Prepare comprehensively for the 200-301 CCNA exam with SPOTO's comprehensive practice tests and exam resources. Our platform offers a wide range of exam materials, including exam dumps, sample questions, and mock exams, designed to reinforce both theoretical knowledge and practical skills in networking. Dive into our extensive collection of exam materials to familiarize yourself with router and switch configurations, crucial for the exam. Understanding theoretical topics is equally essential, and our exam questions and answers help solidify your grasp. With our online exam questions and exam simulator, you can simulate the testing environment and enhance your exam practice. Trust SPOTO for top-notch exam preparation, guiding you towards success in your CCNA certification journey.
Take other online exams
Question #1
Which route type does the routing protocol Code D represent in the output?
A. statically assigned route
B. route learned through EIGRP C
View answer
Correct Answer: A

View The Updated 200-301 Exam Questions

SPOTO Provides 100% Real 200-301 Exam Questions for You to Pass Your 200-301 Exam!

Get 200-301 Practice Test
Question #2
If OSPF is running on this network, how does Router2 handle traffic from Site B to 10.10.13.128/25 at Site A?
A. It sends packets out of interface Fa0/1 only
B. It sends packets out of interface Fa0/2 only
View answer
Correct Answer: B
Question #3
Which statement about VLAN configuration is true?
A. The switch must be in VTP server or transparent mode before you can configure a VLAN
B. The switch must be in config-vlan mode before you configure an extended VLAN C
View answer
Correct Answer: BDE
Question #4
Router R1 must send all traffic without a matching routing-table entry to 192.168.1.1. Which configuration accomplishes this task?
A. R1#Config t R1(config)#ip routing R1(config)#ip route default-route 192
B. R1#Config t R1(config)#ip routing R1(config)#ip route 192
View answer
Correct Answer: D
Question #5
Which two actions influence the EIGRP route selection process? (Choose two.)
A. The advertised distance is calculated by a downstream neighbor to inform the local router of the bandwidth on the link
B. The router calculates the feasible distance of all paths to the destination route
E. The router calculates the reported distance by multiplying the delay on the exiting interface by 256
View answer
Correct Answer: D
Question #6
Router R2 is configured with multiple routes to reach network 10.1.1.0/24 from router R1. Which path is chosen by router R2 to reach the destination network 10.1.1.0/24? A.static B.EIGRP C.eBGP D.OSPF
Router R2 is configured with multiple routes to reach network 10.
View answer
Correct Answer: B
Question #7
Which MAC address is recognized as a VRRP virtual address?
A. 0000
B. 0005
View answer
Correct Answer: D
Question #8
Which command should you enter to verify the priority of a router in an HSRP group?
A. show hsrp
B. show sessions C
View answer
Correct Answer: B
Question #9
Which command must you enter to guarantee that an HSRP router with higher priority becomes the HSRP primary router after it is reloaded?
A. standby 10 preempt
B. standby 10 version 1 C
View answer
Correct Answer: C
Question #10
When OSPF learns multiple paths to a network, how does it select a route?
A. For each existing interface, it adds the metric from the source router to the destination to calculate the route with the lowest bandwidth
B. It counts the number of hops between the source router and the destination to determine the route with the lowest metric
View answer
Correct Answer: B
Question #11
An engineer configured an OSPF neighbor as a designated router. Which state verifies the designated router is in the proper mode? A.Init
B. 2-way C
View answer
Correct Answer: C
Question #12
The New York router is configured with static routes pointing to the Atlanta and Washington sites. Which two tasks must be performed so that the Se0/0/0 interfaces on the Atlanta and Washington routers can reach one another? (Choose two.)
A. Configure the ipv6 route 2023::/126 2012::1 command on the Atlanta router
B. Configure the ipv6 route 2012::/126 2023::2 command on the Washington router
E. Configure the ipv6 route 2012::/126 s0/0/0 command on the Atlanta router
View answer
Correct Answer: B
Question #13
A user configured OSPF and advertised the Gigabit Ethernet interface in OSPF. By default, to which type of OSPF network does this interface belong?
A. point-to-multipoint
B. point-to-point C
View answer
Correct Answer: B
Question #14
A user configured OSPF in a single area between two routers. A serial interface connecting R1 and R2 is running encapsulation PPP. By default, which OSPF network type is seen on this interface when the user types show ip ospf interface on R1 or R2?
A. nonbroadcast
B. point-to-point C
View answer
Correct Answer: A
Question #15
What does router R1 use as its OSPF router-ID?
A. 10
B. 10
View answer
Correct Answer: D
Question #16
Router A learns the same route from two different neighbors; one of the neighbor routers is an OSPF neighbor, and the other is an EIGRP neighbor. What is the administrative distance of the route that will be installed in the routing table?
A. 20
B. 90 C
View answer
Correct Answer: CE
Question #17
What commands are needed to add a subinterface to Ethernet0/0 on R1 to allow for VLAN 20, with IP address 10.20.20.1/24?
A. R1(config)#interface ethernet0/0 R1(config)#encapsulation dot1q 20 R1(config)#ip address 10
B. R1(config)#interface ethernet0/0
View answer
Correct Answer: B
Question #18
Theshow ip ospf interface command has been executed on R1. How is OSPF configured?
A. A point-to-point network type is configured
B. The interface is not participating in OSPF
View answer
Correct Answer: AE
Question #19
What are two reasons for an engineer to configure a floating static route? (Choose two.)
A. to enable fallback static routing when the dynamic routing protocol fails
B. to route traffic differently based on the source IP of the packet C
E. to control the return path of traffic that is sent from the router
View answer
Correct Answer: C
Question #20
Which path is used by the router for Internet traffic?
A. 209
View answer
Correct Answer: AD
Question #21
R1 has learned route 192.168.12.0/24 via IS-IS, OSPF, RIP, and Internal EIGRP. Under normal operating conditions, which routing protocol is installed in the routing table? A.IS-IS B.Internal EIGRP C.RIP D.OSPF
R1 has learned route 192. 68
View answer
Correct Answer: AB
Question #22
An engineer is bringing up a new circuit to the MPLS provider on the Gi0/1 interface of Router 1. The new circuit uses eBGP and learns the route to VLAN25 from the BGP path. What is the expected behavior for the traffic flow for route 10.10.13.0/25?
A. Traffic to 10
B. Traffic to 10
View answer
Correct Answer: C
Question #23
When a floating static route is configured, which action ensures that the backup route is used when the primary route fails?
A. The administrative distance must be higher on the primary route so that the backup route becomes secondary
B. The default-information originate command must be configured for the route to be installed into the routing table
View answer
Correct Answer: C
Question #24
Which two minimum parameters must be configured on an active interface to enable OSPFV2 to operate? (Choose two.) A.OSPF process ID
B. OSPF MD5 authentication key C
View answer
Correct Answer: C
Question #25
What action establishes the OSPF neighbor relationship without forming an adjacency?
A. modify hello interval
B. modify process ID C
View answer
Correct Answer: C
Question #26
A network administrator assumes a task to complete the connectivity between PC A and the File Server. Switch A and Switch B have been partially configured with VLANs 10, 11, 12, and 13. What is the next step in the configuration?
A. Add PC A to VLAN 10 and the File Server to VLAN 11 for VLAN segmentation
B. Add VLAN 13 to the trunk links on Switch A and Switch B for VLAN propagation C
View answer
Correct Answer: B
Question #27
R1 has learned route 10.10.10.0/24 via numerous routing protocols. Which route is installed?
A. route with the next hop that has the highest IP B
View answer
Correct Answer: A
Question #28
How does HSRP provide first hop redundancy?
A. It load-balances Layer 2 traffic along the path by flooding traffic out all interfaces configured with the same VLAN
B. It uses a shared virtual MAC and a virtual IP address to a group of routers that serve as the default gateway for hosts on a LAN
View answer
Correct Answer: C
Question #29
A packet is being sent across router R1 to host 172.16.0.14. What is the destination route for the packet?
A. 209
B. 209
View answer
Correct Answer: B
Question #30
An engineer must configure an OSPF neighbor relationship between router R1 and R3. The authentication configuration has been configured and the connecting interfaces are in the same 192.168.1.0/30 subnet. What are the next two steps to complete the configuration? (Choose two.)
A. configure the interfaces as OSPF active on both sides
B. configure both interfaces with the same area ID C
E. configure the same router ID on both routing processes
View answer
Correct Answer: B
Question #31
The loopback1 interface of the Atlanta router must reach the loopback3 interface of the Washington router. Which two static host routes must be configured on the New York router? (Choose two.)
A. ipv6 route 2000::3/128 s0/0/0
B. ipv6 route 2000::1/128 s0/0/1 C
E. ipv6 route 2000::3/128 2023::3
View answer
Correct Answer: AC
Question #32
If configuring a static default route on the router with the ip route 0.0.0.0 0.0.0.0 10.13.0.1 120 command, how does the router respond?
A. It starts sending traffic without a specific matching entry in the routing table to GigabitEthernet0/1
B. It immediately replaces the existing OSPF route in the routing table with the newly configured static route
View answer
Correct Answer: B
Question #33
A router running EIGRP has learned the same route from two different paths. Which parameter does the router use to select the best path?
A. as-path
B. administrative distance C
View answer
Correct Answer: B
Question #34
What criteria is used first during the root port selection process? A.local port ID
B. lowest path cost to the toot bridge C
View answer
Correct Answer: CE
Question #35
A packet is being sent across router R1 to host 172.16.3.14. To which destination does the router send the packet?
A. 207
B. 207
View answer
Correct Answer: A
Question #36
A packet is destined for 10.10.1.22. Which static route does the router choose to forward the packet?
A. ip route 10
B. ip route 10
View answer
Correct Answer: D
Question #37
Which route type is configured to reach the Internet?
A. floating static route
B. host route C
View answer
Correct Answer: B
Question #38
Which attribute does a router use to select the best path when two or more different routes to the same destination exist from two different routing protocols?
A. dual algorithm B
View answer
Correct Answer: C
Question #39
How does the router manage traffic to 192.168.12.16?
A. It chooses the EIGRP route because it has the lowest administrative distance
B. It load-balances traffic between all three routes
View answer
Correct Answer: D
Question #40
Which configuration issue is preventing the OSPF neighbor relationship from being established between the two routers?
A. R1 has an incorrect network command for interface Gi1/0
B. R2 should have its network command in area 1
View answer
Correct Answer: A
Question #41
By default, how does EIGRP determine the metric of a route for the routing table?
A. It uses the bandwidth and delay values of the path to calculate the route metric
B. It uses a default metric of 10 for all routes that are learned by the router
View answer
Correct Answer: C
Question #42
With which metric was the route to host 172.16.0.202 learned? A.0
B. 110 C
View answer
Correct Answer: D
Question #43
Thedefault-information originate command is configured under the R1 OSPF configuration. After testing, workstations on VLAN 20 at Site B cannot reach a DNS server on the Internet. Which action corrects the configuration issue?
A. Add the default-information originate command on R2
B. Add the always keyword to the default-information originate command on R1
View answer
Correct Answer: D
Question #44
Which two outcomes are predictable behaviors for HSRP? (Choose two.)
A. The two routers negotiate one router as the active router and the other as the standby router
B. The two routers share the same interface IP address, and default gateway traffic is load-balanced between them
E. The two routers share a virtual IP address that is used as the default gateway for devices on the LAN
View answer
Correct Answer: C
Question #45
A router received these five routes from different routing information sources. Which two routes does the router install in its routing table? (Choose two)
A. OSPF route 10
B. IBGP route 10
E. RIP route 10
View answer
Correct Answer: C
Question #46
Which route does R1 select for traffic that is destined to 192.168.16.2?
A. 192
B. 192
View answer
Correct Answer: C
Question #47
Router R1 Fa0/0 cannot ping router R3 Fa0/1. Which action must be taken in router R1 to help resolve the configuration issue?
A. set the default gateway as 20
B. configure a static route with Fa0/1 as the egress interface to reach the 20
View answer
Correct Answer: BD
Question #48
What is the next hop address for traffic that is destined to host 10.0.1.5?
A. Loopback 0
B. 10
View answer
Correct Answer: A
Question #49
How does router R1 handle traffic to 192.168.10.16?
A. It selects the IS-IS route because it has the shortest prefix inclusive of the destination address
B. It selects the RIP route because it has the longest prefix inclusive of the destination address C
View answer
Correct Answer: A
Question #50
An engineer is configuring the New York router to reach the Lo1 interface of the Atlanta router using interface Se0/0/0 as the primary path. Which two commands must be configured on the New York router so that it reaches the Lo1 interface of the Atlanta router via Washington when the link between New York and Atlanta goes down? (Choose two.)
A. Ipv6 route 2000::1/128 2012::1
B. Ipv6 route 2000::1/128 2012::1 5 C
View answer
Correct Answer: D

View Answers after Submission

Please submit your email and WhatsApp to get the answers of questions.

Note: Please make sure your email ID and Whatsapp are valid so that you can get the correct exam results.

Email:
Whatsapp/phone number:


Copyright © 2024. Designer by SPOTO Official Website. All Rights Reserved.