DON'T WANT TO MISS A THING?

Certification Exam Passing Tips

Latest exam news and discount info

Curated and up-to-date by our experts

Yes, send me the newsletter

Boost Your Certification Prep with Aruba HPE6-A72 Mock Tests, Aruba Certified Switching Associate | SPOTO

Take control of your preparation for the Aruba Certified Switching Associate (ACSA) certification exam (HPE6-A72) with our comprehensive study materials and exam questions. Our resources empower you to learn at your own pace, providing a range of practice tests, including free tests, online exam questions, and sample questions, to facilitate effective exam practice. The ACSA certification validates your fundamental skills in configuring and managing modern, open standards-based networking solutions tailored for small-to-midsized businesses (SMBs) and campus networks. Utilize our exam dumps and exam questions and answers to reinforce your understanding and readiness for the exam. With our latest practice tests and exam materials, you'll be well-prepared to succeed in passing your certification exam and demonstrate your expertise to prospective employers. Trust SPOTO to provide the essential tools for your certification journey.
Take other online exams
Question #1
Which network category applies to a SOHO internal network?
A. SD-WAN
B. LAN
C. WAN
D. Internet
View answer
Correct Answer: AD

View The Updated HPE6-A72 Exam Questions

SPOTO Provides 100% Real HPE6-A72 Exam Questions for You to Pass Your HPE6-A72 Exam!

Get HPE6-A72 Practice Test
Question #2
All four switches in the diagram have been configured with the region name "Aruba1". What two other MSTP configurations must match for switches within the same MST region? (Choose two.)
A. MST region type
B. MST Bridge ID
C. MST version number
D. MST revision number
E. MST VLAN to instance mapping
View answer
Correct Answer: C
Question #3
Which Ethernet port combination does the Aruba 5400R ZL2 switch series support?
A. 10/100 Megabit Ethernet, Gigabit Ethernet, and 100 Gigabit Ethernet
B. Gigabit Ethernet, 25 Gigabit Ethernet, and 40 Gigabit Ethernet
C. 10/100 Megabit Ethernet, Gigabit Ethernet, 25 Gigabit Ethernet, and 100 Gigabit Ethernet
D. 10/100 Megabit Ethernet, Gigabit Ethernet, and 40 Gigabit Ethernet
View answer
Correct Answer: A
Question #4
Which two statements accurately describe stacking with Aruba switches? (Choose two.)
A. A VSF stack is allowed between an AOS-CX 6300M and 6300F switches
B. VSF is a core or aggregation layer stacking technology due to the high resiliency of sharing a single control plane
C. The VSF feature is not compatible between AOS-CX and AOS platforms
D. A VSF stack is allowed between an AOS 5400R and an AOS-CX 6400
E. VSF and VSX are stacking option with the AOS-CX 8320
View answer
Correct Answer: BC
Question #5
What is the Link Layer Discovery Protocol?
A. a discovery protocol used between Layer 3 devices to determine routes within a single autonomous system
B. a standardized IPv6 neighbor discovery protocol used to replace the ARP and broadcast mechanism used in IPv4
C. a standardized protocol for communicating directly-connected device information and capabilities
D. an Aruba proprietary discovery protocol supported in all Aruba switches along with Cisco Discovery Protocol or CDP
View answer
Correct Answer: B
Question #6
What is the correct description of a Multi-Layer Switch?
A. a switch with Layer 3 routing capabilities but lacks any Layer 1 features as a consequence
B. any switch that supports PoE, LLDP-MED and Flow Control
C. has all the functionality of a Layer 2 switch and most of the functionality of a Layer 3 router
D. multi-Layer refers specifically to using chassis switches with several line cards over stack port switches
View answer
Correct Answer: BD
Question #7
What connectivity commands are available on AOS-CX switches? (Choose two.)
A. netstatus
B. traceroute
C. ping
D. pathping
E. tracert
View answer
Correct Answer: CE
Question #8
Click on the colored box that corresponds with the line that best represents Broadcast traffic flow.
A. Mastered
B. Not Mastered
View answer
Correct Answer: AE
Question #9
What are two features in a 2-Tier design that are implemented at the Access layer? (Choose two.)
A. VPN access
B. WAN/MPLS connectivity
C. Endpoint Access
D. Deep packet inspection
E. Power over Ethernet
View answer
Correct Answer: C
Question #10
The section in blue can be ignored. SW1(config)# interface 1/1/1-1/1/2 SW1(config-if-<1/1/1-1/1/2)# vlan access 2 SW1(config-if-<1/1/1-1/1/2)# exit SW1(config)# interface 1/1/11-1/1/17 SW1(config-if-<1/1/11-1/1/17)# vlan access 17 SW1(config-if-<1/1/11- 1/1/17)# exit After completing the above commands, what is the expected output of show vlan with no other vlan commanded having been added?
A.
B.
C. D
View answer
Correct Answer: D
Question #11
Core# configure terminal Core(config)# vrf Green Core(config-vrf)# exit Core(config)# Core(config)# interface vlan 50 Core(config-if-vlan)# ? Given the configuration on the CORE switch shown above, what command would follow to assign the switched virtual interface (SVI) vlan 50 to the VRF created?
A. Core(config-if-vlan)# vrf attach Green
B. Core(config-if-vlan)# ip vpn-instance Green
C. Core(config-if-vlan)# ip vrf forwarding Green
D. Core(config-if-vlan)# routing-context Green vrf
View answer
Correct Answer: A

View The Updated Aruba Exam Questions

SPOTO Provides 100% Real Aruba Exam Questions for You to Pass Your Aruba Exam!

Get Aruba Practice Test

View Answers after Submission

Please submit your email and WhatsApp to get the answers of questions.

Note: Please make sure your email ID and Whatsapp are valid so that you can get the correct exam results.

Email:
Whatsapp/phone number:


Copyright © 2024. Designer by SPOTO Official Website. All Rights Reserved.