Boost Your Certification Prep with CCNP 350-601 Mock Tests, Cisco Data Center 350-601 DCCOR

Question #1

What is the result of implementing the configuration?

A. The RADIUS server timeout value is 15 milliseconds

B. RADIUS traffic is sourced from the VLAN 200 interface

View answer

Correct Answer: D

Question #2

An engineer must modify an overridden policy by changing the number of FCNS database entries to 1500 and then generate a message. What configuration will accomplish this task?

A. event manager applet fcns_policy override __fcns_entries_max_per_switch action 1

B. event manager applet fcns_policy override __fcns_entries_max_per_switch action 1

View answer

Correct Answer: D

Question #3

An engineer must use the python module in the guest shell of the Cisco Nexus 9000 Series switch to shutdown port Ethernet 1/4. Which command set will accomplish this? A.from cli import * cli(''conf t'') cli(''interface eth1/4'') cli(''shutdown'') B.from cisco import cli cli(''conf t'' ; ''interface eth1/4'' ; ''shut”) C.from cli import * cli(''conf t ; interface eth1/4 ; shut'') D.from cisco import cli cli(''conf t ; interface eth1/4) cli(''shutdown'')

An engineer must use the python module in the guest shell of the Cisco Nexus 9000 Series switch to shutdown port Ethernet 1/4. Which command set will accomplish this? A

View answer

Correct Answer: C

Question #4

An engineer must configure RBAC in Cisco UCS Manager in an existing data center environment. Which two roles are suitable for configuring LAN connectivity policies? (Choose two.) A.server-profile

B. network-admin C

E. admin

View answer

Correct Answer: A

Question #5

An engineer is enabling port security on a Cisco MDS 9000 Series Switch. Which feature of enabling port security on a Cisco MDS 9000 Series Switch must be considered?

A. It is distributed by using Cisco Fabric Services

B. It authorizes only the configured sWWN to participate in the fabric

View answer

Correct Answer: B

Question #6

When a strict CoPP policy is implemented, which statement describes an event during which packets are dropped?

A. A large system image is copied to a switch by using the default VRF

B. Fifteen SSH sessions remain connected to the switch

View answer

Correct Answer: A

Question #7

Which two authentication types does Cisco UCS Manager support when configuring authentication? (Choose two.) A.PAM

B. local C

View answer

Correct Answer: D

Question #8

An engineer is configuring AAA authentication on an MDS 9000 switch. The LDAP server is located under the IP 10.10.2.2. The data sent to the LDAP server should be encrypted. Which command should be used to meet these requirements? A.ldap-server 10.10.2.2 port 443

B. ldap-server 10

View answer

Correct Answer: D

Question #9

A customer needs a tool to take advantage of the CI/CD model to streamline its operations and optimize cost. The customer wants to integrate the solution with the Cisco products it currently uses, including Cisco ACI networking and Cisco UCS servers. The solution should also provide on-premises Kubernetes and AppDynamics performance monitoring. Because of the security requirements, the solution should not install a local client on products under management. Which orchestration solution meets these requireme

B. Cisco CloudCenter C

View answer

Correct Answer: S

Question #10

An engineer enters these commands while in EEM on a Cisco Nexus 9000 Series Switch event manager applet Backup-config event timer watchdog time 1800 name timer event cli match "copy running-config startup-config" What is the result of applying this configuration?

A. It generates an error because no action is mentioned

B. It executes the copy running-config startup-confing command

View answer

Correct Answer: A

Question #11

An engineer must monitor all LAN traffic on Fabric A from a blade server. Which source should be configured in the test-span monitor session to complete this task?

A. all uplink FCoE ports

B. all vNICs from the service profile that correspond to this server C

View answer

Correct Answer: S

Question #12

The Cisco Nexus switch Generic Online Diagnostics policy for a PortLoopback test requires 10 consecutive failures to error disable the port. The customer wants to change it to 5 consecutive failures. Which configuration applies the changes for module 1 only? A.Nexus(config)# event manager applet custom-PortLoopback override __PortLoopback Nexus(config-applet)# event gold mod all test PortLoopback testing-type bootup consecutive-failure 5 Nexus(config-applet)# action 1 publish-event B.Nexus(config)# event ma

The Cisco Nexus switch Generic Online Diagnostics policy for a PortLoopback test requires 10 consecutive failures to error disable the port. The customer wants to change it to 5 consecutive failures

View answer

Correct Answer: C

Question #13

After a Cisco Nexus 7000 Series Switch chassis replacement, the administrator discovers that all vPC-enabled LACP port channels are reinitialized. The administrator wants to prevent this issue the next time the chassis is replaced. Which two actions must be taken to meet this requirement before the isolated device is reloaded? (Choose two.)

A. Change the vPC system-priority of the replacement chassis to a higher value than the peer

B. Set the vPC MAC address to a higher value than the peer C

E. Change the vPC system-priority of the replacement chassis to a lower value than the peer

View answer

Correct Answer: S

Question #14

An engineer needs a utility to translate traditional Nexus CLI inputs and generate Python code using XML and JSON message formats. The solution needs to be available on a Nexus 7700 series switch. Which utility should be used? A.NX-API Sandbox B.NX-OS JSON-RPC C.Guest Shell for NX-OS D.Open NX-OS

An engineer needs a utility to translate traditional Nexus CLI inputs and generate Python code using XML and JSON message formats. The solution needs to be available on a Nexus 7700 series switch

View answer

Correct Answer: C

Question #15

A network architect wants to propose a scalable network monitoring solution in which data is repeatedly acquired from network devices. The solution must use a push model and provide close to real-time access to operational data. Which technology must be used to meet these requirements?

A. CLI-based scripting

B. logging C

View answer

Correct Answer: S

Question #16

Which action is taken to ensure that the relay agent forwards the DHCP BOOTREQUEST packet to a DHCP server?

A. Configure the IP address of the DHCP server

View answer

Correct Answer: BE

Question #17

A network architect is asked to design and manage geographically distributed data centers across cities and decides to use a Multi-Site Orchestrator deployment. How many orchestrators should be deployed? A.5 B.3 C.4 D.2

A network architect is asked to design and manage geographically distributed data centers across cities and decides to use a Multi-Site Orchestrator deployment. How many orchestrators should be deployed? A

View answer

Correct Answer: BE

Question #18

An engineer configured an environment that contains the vPC and non-vPC switches. However, it was noticed that the downstream non-vPC switches do not receive the same STP bridge ID from the upstream vPC switch peers. Which vPC feature must be implemented to ensure that vPC and non-vPC switches receive the same STP bridge ID from the upstream vPC switch peers?

A. vpc local role-priority 4000 B

View answer

Correct Answer: S

Question #19

An engineer performs a set of configuration changes for the vPC domain using Session Manager. Which two commands are used to verify the configuration and apply the device changes when no errors are returned? (Choose two.) A.commit B.verify C.apply D.checkpoint E.write

An engineer performs a set of configuration changes for the vPC domain using Session Manager. Which two commands are used to verify the configuration and apply the device changes when no errors are returned? (Choose two

View answer

Correct Answer: S

Question #20

An engineer is running an ACI fabric, has VMM integration with VMware vCenter, and wants to enable microsegmentation based on vCenter VM attributes. Which statement describes microsegmentation in this scenario?

A. ACI does not support microsegmentation based on vCenter VM attributes

B. When enabled, microsegmentation performs distributed switching and routing on the ESXi hosts

View answer

Correct Answer: A

Question #21

A host in EPG Client wants to talk to a webserver in EPG Web. A contract with default settings is defined between EPG Client and EPG Web, which allows TCP communication initiated by the client toward the webserver with TCP destination port 80. Which statement describes this scenario?

A. If EPG Web is made a preferred group member, a contract between EPG Client and EPG Web is no longer required for the host in EPG Client to reach the webserver in EPG Web

B. If vzAny is configured to consume and provide a "deny all" contract, traffic between EPG Client and EPG Web is no longer allowed

View answer

Correct Answer: BE

Question #22

Which command needs to be added to the line starting with the “file” keyword to have the generated running-config file with the name ‘fusion-config_’ and current date?

A. str

B. ('fusion-config_') + date C

View answer

Correct Answer: B

Question #23

An engineer is asked to manage a large-scale data center and collect information from multiple Cisco NX-OS devices using Cisco NX-OS Data Management Engine model. Which technology should be used to accomplish this goal?

A. NETCONF

B. NX Yang C

View answer

Correct Answer: C

Question #24

Port security is enabled on a Cisco MDS 9000 Series Switch. Which statement is true?

A. Port security can be enabled only globally and affects all VSANs

B. Any devices currently logged in must be added manually to the device database

View answer

Correct Answer: D

Question #25

Which behavior defines streaming telemetry as a push model in Cisco devices?

A. Events and network changes generate telemetry data

B. Monitoring clients are pulling data from the network to see real-time statistics C

View answer

Correct Answer: S

Question #26

What is a feature of NFS?

A. zone-based access control

B. Kerberos-based security model C

View answer

Correct Answer: C

Question #27

Which feature must be enabled to support the use of JSON and XML encodings when a Cisco Nexus 7000 Series Switch is deployed?

A. Bash shell B

View answer

Correct Answer: A

Question #28

What is the result of implementing this configuration?

A. The switch queries the TACACS+ server by using an encrypted text PAP login

B. The TACACS+ server uses the type-6 encrypted format

View answer

Correct Answer: B

Question #29

An engineer has a primary fabric that is named UCS-A and a secondary fabric that is named UCS-B. A certificate request that has a subject name of sjc2016 for a keyring that is namedkr2016 needs to be created. The cluster IP address is 10.68.68.68. Which command set creates this certificate request? A.UCS-A# scope keyring kr2016 UCS-A /keyring# create certreq 10.68.68.68 sjc2016 UCS-A /keyring*# commit-buffer B.UCS-B# scope keyring kr2016 UCS-B /keyring# create certreq ip 10.68.68.68 subject-name sjc2016 UCS

An engineer has a primary fabric that is named UCS-A and a secondary fabric that is named UCS-B. A certificate request that has a subject name of sjc2016 for a keyring that is namedkr2016 needs to be created

View answer

Correct Answer: A

Question #30

An engineer configures a new application profile using REST API and receives this error message. Which method can be used before the application profile can be configured?

A. GET to aaaListDomains

B. POST to aaaRefresh C

View answer

Correct Answer: D

Question #31

Which setting must be configured to prevent the reuse of passwords?

A. Change Interval

B. No Change Interval C

View answer

Correct Answer: C

Question #32

Port security is statically configured on a Cisco Nexus 7700 Series switch and F3 line card. The switch is configured with an Advanced Services license. Which two actions delete secured MAC addresses from the interface? (Choose two.)

A. The address must be removed from the configuration

B. Shutdown and then no shutdown must be run on the interface

E. The interface must be converted to a routed port

View answer

Correct Answer: D

Question #33

Which configuration generates a syslog message when CPU utilization is higher than 60%?

A. event manager applet HIGH-CPU event snmp oid 1

B. event manager applet HIGH-CPU event snmp oid 1

View answer

Correct Answer: AB

DON'T WANT TO MISS A THING?

100% Pass Cisco, PMP, CISA, CISM, AWS Practice test on SALE!
Get Now

Boost Your Certification Prep with CCNP 350-601 Mock Tests, Cisco Data Center 350-601 DCCOR | SPOTO

View Answers after Submission

DON'T WANT TO MISS A THING?

100% Pass Cisco, PMP, CISA, CISM, AWS Practice test on SALE! Get Now

Boost Your Certification Prep with CCNP 350-601 Mock Tests, Cisco Data Center 350-601 DCCOR | SPOTO

View Answers after Submission

100% Pass Cisco, PMP, CISA, CISM, AWS Practice test on SALE!
Get Now