DON'T WANT TO MISS A THING?

Certification Exam Passing Tips

Latest exam news and discount info

Curated and up-to-date by our experts

Yes, send me the newsletter

ASQ CQE Exam Questions and Answers, Certified Quality Engineer | SPOTO

SPOTO's latest exam dumps on the homepage, with a 100% pass rate! SPOTO delivers authentic Cisco CCNA, CCNP study materials, CCIE Lab solutions, PMP, CISA, CISM, AWS, and Palo Alto exam dumps. Our comprehensive study materials are meticulously aligned with the latest exam objectives. With a proven track record, we have enabled thousands of candidates worldwide to pass their IT certifications on their first attempt. Over the past 20+ years, SPOTO has successfully placed numerous IT professionals in Fortune 500 companies.
Take other online exams
Question #1
Risk control includes making decisions using which of the following pieces of information?
A. Acceptable levels of riskcorrect
B. Fault tree analyses results
C. Check sheet comparisons
D. Analysis of experiments
View answer
Correct Answer: A
Question #2
Working on ail design phases simultaneously is characteristic of
A. Adesign for six sigma
B. Bdesign for reliability
C. Cquality function deployment
D. Dconcurrent engineering
View answer
Correct Answer: D
Question #3
Which of the following are the MOST logical reasons for providing source inspection? . The supplier has consistently shown poor out-going quality. . The key inspection points are hidden after assembly at the suppliers' plant. . The supplier requests the inspection to save them potential shipping expenses. . The criticality of the product warrants it.
A. ,IIandIVonly
B. IandIVonly
C. I,IIIandIVonly
D. ,II,IIIandIV
View answer
Correct Answer: D
Question #4
The relationship between factors can be displayed using which of the following tools?
A. Control chart
B. Matrix diagramcorrect
C. Check sheet
D. Process map
View answer
Correct Answer: B
Question #5
Which of the following elements describes the combination of the severity and probability of occurrence of harm?
A. Failure mode
B. Hazard
C. Riskcorrect
D. Detection
View answer
Correct Answer: C
Question #6
The use of 100% inspection normally means
A. That the final customers will not experience defective product
B. That selected characteristics have been evaluated against specified standards
C. That there will be an opportunity to rework any product deemed to be outside of specifications
D. That the lowest over-all quality costs have been considered
View answer
Correct Answer: B
Question #7
Which of the following is NOT considered a prevention cost?
A. Writing operating procedures
B. Training
C. Data acquisition and analysis
D. Calibrating test equipment
View answer
Correct Answer: D
Question #8
A company has received many customer complaints due to damaged units being received at the customer's distribution center. After a thorough investigation, it is determined that the units' packaging is insufficient. The company decides that a potential solution is to add reinforcements to the unit packaging to resolve the issue. Which of the following actions is most appropriate?
A. Implement the solution
B. Pilot the solutioncorrect
C. Outsource packaging testing
D. Consider implementing the solution on similar products
View answer
Correct Answer: B
Question #9
An improvement in quality costs is MOST clearly indicated when:
A. Appraisal and failure costs drop
B. Prevention costs increase
C. Total quality costs fall below 15% of total sales
D. Management objectives are met
View answer
Correct Answer: D
Question #10
Rank in order the following items from most effective to least effective when developing materials for a quality training program. 1. Case studies 2. General examples 3. Job related examples 4. Theory
A. 3,4,2,1
B. 4,2,1,3
C. 3,1,2,4correct
D. 4,1,3,2
View answer
Correct Answer: C
Question #11
Which of the following parties, traditionally initiates an audit?
A. he client
B. he plant manager
C. he lead auditor
D. he auditee
View answer
Correct Answer: A
Question #12
A purchase order for subassemblies classified as critical must include a review by . Quality engineering. . The procurement department. . Design engineering.
A. IIonly
B. andIIIonly
C. IandIIIonly
D. ,IIandIII
View answer
Correct Answer: D
Question #13
During the performance of an audit, which of the following are key considerations? . What sampling plans may be necessary? . Is the audit schedule progressing as planned? . Is there a need for a technical specialist? . Is the level of compliance satisfactory?
A. ,IIandIIIonly
B. IandIVonly
C. andIVonly
D. ,II,IIIandIV
View answer
Correct Answer: B
Question #14
Information that is received by upper management, is often distorted. Which of the following actions is effective in countering this problem? . Stop killing the messenger. . Establishing an open door policy. . Practice management by walking around.
A. Ionly
B. IandIIonly
C. IandIIIonly
D. I,IIandIII
View answer
Correct Answer: D
Question #15
The purpose of the opening meeting for an audit is to
A. establish the authority of the lead auditor and audit team over the auditees
B. determine approximately how much time and what resources will be required to conduct the audit
C. conduct introductions, review the audit's scope and procedures, and clarify details of the audit plancorrect
D. present the audit team's initial observations regarding the effectiveness of the auditee's quality system
View answer
Correct Answer: C
Question #16
Which of the following tools can be used to determine the best option from many choices based on their importance and merits?
A. Interrelationship digraph
B. PERT chart
C. Tree diagram
D. Prioritization matrixcorrect
View answer
Correct Answer: D
Question #17
The number of runs required by a full-factorial design with three factors each at two levels is equal to
A. 6
B. 8correct
C. 9
D. 12
View answer
Correct Answer: B
Question #18
When measurements are taken using a reference scale, such as a pair of calipers, the resulting data are referred to as
A. classified
B. attribute
C. discrete
D. continuouscorrect
View answer
Correct Answer: D
Question #19
An improvement in quality costs is MOST clearly indicated when:
A. Appraisal and failure costs drop
B. Prevention costs increase
C. Total quality costs fall below 15% of total sales
D. Management objectives are met
View answer
Correct Answer: D
Question #20
The following data sets were presented to top management. Which problem area should be targeted for improvement first?
A. A
B. Bcorrect
C. C
D. D
View answer
Correct Answer: B
Question #21
During the building phase of improvement team development, which of the following properly describes team activities? . The team leader is usually directive. . The team leader often delegates tasks. . Team members prioritize and perform duties. . Team members are uncertain of their duties.
A. IIandIIIonly
B. I,IIandIIIonly
C. IandIV only
D. II,IIIandIV only
View answer
Correct Answer: C
Question #22
Inspection operations typically -
A. elp in assuring satisfactory quality
B. educe the usability of the product or service involved
C. equire precise equipment in most instances
D. ccur between all manufacturing operators
View answer
Correct Answer: A
Question #23
Which of the following criteria must be considered when a classification of defects system is established?
A. AThe current cost of quality system
B. BThe financial impact of the defects
C. CTightness of tolerance as an indication of failure
D. DThe relative seriousness of the defects
View answer
Correct Answer: D
Question #24
When asked to make recommendations on how to correct any deficiencies noted in the exit report, the auditor(s) should
A. ake the best recommendation possible
B. onfer with the client first
C. void a recommendation in writing but help the auditee of possible
D. ffer no specific advice and few suggestions
View answer
Correct Answer: D
Question #25
Which of the following tools is used to plan for and avoid situations that might interfere with project implementation?
A. Affinity diagram
B. Matrix diagram
C. Interrelationship digraph
D. Process decision program chancorrect
View answer
Correct Answer: D
Question #26
The audit team normally advises the auditee immediately upon the discovery of a finding during an audit. Which of the following items is (are) valid reasons for taking this action? . If corrected immediately, the findings may be eliminated from the audit report. . If corrected immediately, it shows genuine auditee interest in the objectives of the audit. . If corrected immediately, it demonstrates the strength of an ongoing audit program.
A. only
B. IIonly
C. IandIIIonly
D. ,IIandIII
View answer
Correct Answer: C
Question #27
According to ANSI ASQ Z1.4. switching from tightened inspection to normal inspection can occur when how many consecutive lots have been accepted?
A. Four out of five
B. Five out of fivecorrect
C. Eight out of ten
D. Nine out of ten
View answer
Correct Answer: B
Question #28
A three-level, two-variable, full factorial experiment is to be run. The minimum number of runs will be
A. A6
B. B8
C. C9
D. D18
View answer
Correct Answer: C
Question #29
A company incurred the following quality costs last month. Incoming material inspection $5,000 What is the total cost of external failures?
A. $6000
B. $8000
C. $9000correct
D. $9450
View answer
Correct Answer: C
Question #30
The starting point for an organization when conducting a risk-based audit is to
A. Aidentify and quantify risks
B. Brequest a third-party audit
C. Ccommission a gap analysis
D. Dadd the audit to the internal audit schedule
View answer
Correct Answer: A

View Answers after Submission

Please submit your email and WhatsApp to get the answers of questions.

Note: Please make sure your email ID and Whatsapp are valid so that you can get the correct exam results.

Email:
Whatsapp/phone number:


Copyright © 2024. Designer by SPOTO Official Website. All Rights Reserved.