DON'T WANT TO MISS A THING?

Certification Exam Passing Tips

Latest exam news and discount info

Curated and up-to-date by our experts

Yes, send me the newsletter

Aruba HPE6-A70 Exam Questions And Answers, Aruba Certified Mobility Associate (ACMA) | SPOTO

The Aruba HPE6-A70 Exam is a vital certification for IT professionals aiming to become Aruba Certified Mobility Associates (ACMA). Designed to validate candidates’ expertise in networking solutions, mobility technologies, and Aruba’s wireless solutions, this exam is essential for anyone pursuing proficiency in Aruba technologies. Passing the HPE6-A70 demonstrates your ability to configure, manage, and troubleshoot Aruba networking solutions effectively. With SPOTO's exam prep resources, candidates can gain access to up-to-date exam questions, mock tests, and practice dumps to build confidence and prepare thoroughly. These resources align with the real exam objectives and ensure that you’re well-equipped to tackle the certification. Whether you're looking for ACMA practice tests or comprehensive HPE6-A70 study materials, SPOTO provides proven strategies for success. Prepare smartly and boost your career with Aruba ACMA certification.
Take other online exams
Question #1
The AP Wizard allows the selection of APs to be provisioned using which of the following methods (Select three):
A. APs in particular AP Group
B. All APs
C. APs designated as Air Monitors
D. APs meeting specified search criteria
E. APs of a specific type
View answer
Correct Answer: ABD

View The Updated HPE6-A70 Exam Questions

SPOTO Provides 100% Real HPE6-A70 Exam Questions for You to Pass Your HPE6-A70 Exam!

Get HPE6-A70 Practice Test
Question #2
What information is required by an AP in order to boot? (Select three)
A. AP's IP Address, Netmask, Default Gateway
B. AP's Name and Group
C. Aruba Controller's Master IP Address
D. An established NTP connection to the Master Controller
E. Establish an IPSEC tunnel with the Master controller
View answer
Correct Answer: ABC
Question #3
Which answer correctly orders the following AP boot processes as they occur? a. AP Transfers OS from controller b. AP builds GRE tunnel to the controller c. AP determines IP address of the controller d. AP Radio is enabled
A. a, c, d, b
B. c, a, b, d
C. b, d, a, c
D. a, b, c, d
E. c, b, a, d
View answer
Correct Answer: B
Question #4
A Remote AP uses which type of secure tunnel to communicate with a controller:
A. NAT-T
B. IPSec
C. PPTP
D. GRE
E. IP-IP
View answer
Correct Answer: B
Question #5
When configuring the Mobility Controller's internal DHCP via the startup wizard which option is NOT available for configuration (select two)?
A. Pod name
B. Default router
C. Option 43
D. Domain name
E. Netbios name server
View answer
Correct Answer: AC
Question #6
Which of the following deployment types is NOT a valid option when using the AP Wizard?
A. LAN
B. Remote
C. Roaming
D. Remote Mesh
E. LAN Mesh
View answer
Correct Answer: C
Question #7
Which ARM function converts APs with excess capacity into Air Monitors?
A. Airtime fairness
B. Coordinated access to a single channel
C. Co-channel interference mitigation
D. Client aware scanning
E. Band Steering
View answer
Correct Answer: C
Question #8
Which of the following information is gathered by APs during scanning periods? (Select three)
A. MAC addresses of neighboring APs
B. Security threats in the surroundings
C. Type of non-802
D. Interfering Clients connected to other APs
E. 4
View answer
Correct Answer: ABD
Question #9
When a client is blacklisted, the controller will:
A. Send a message telling the client it has been blacklisted
B. De-authenticate the client from the network but allow it to keep transmitting data
C. Only block the client if it hasn't yet associated with an AP
D. Stop the client from associating with any SSID on the controller
E. Block the client from the SSID he was connected to
View answer
Correct Answer: D
Question #10
What is the purpose of the validuser ACL?
A. When a user transmits data through the controller, the validuser ACL is used to check if the user is in the layer 3 user-table
B. Before a client is added to the controller's user table, the validuser ACL is checked to make sure the client has a valid IP address
C. The validuser ACL is used during 802
D. When an AP needs to transmit data to a user, it checks the validuser ACL to make sure the user has a valid IP address
E. A list of configured MAC addresses that define the valid users
View answer
Correct Answer: B
Question #11
When looking at clients in the `Monitoring Clients' section of the Controller, which of the following information is NOT visible?
A. Role
B. MAC address
C. Output power of client radio
D. Method of authentication
E. Age
View answer
Correct Answer: C
Question #12
What does SET ORIENTATION option do in the Visual RF Plan edit tool?
A. Set the horizontal plane on each floor
B. Give the option to resize a floor
C. Sets the North/South orientation of the building
D. Sets the proper vertical floor plan alignment
E. Allows the planner to set the directional antenna orientation
View answer
Correct Answer: D
Question #13
In Extensible Authentication Protocol (EAP) terminology the client station is called the:
A. Station
B. Authenticated Client
C. Supplicant
D. End node
E. Client Device
View answer
Correct Answer: C
Question #14
FQLN can be set for an AP:
A. During AP provisioning
B. At the factory
C. MSCHAPv2
D. By DHCP when an address is requested
E. Using the AP wizard
View answer
Correct Answer: A
Question #15
Which of the following cannot be accomplished from the startup wizard?
A. Basic controller configuration
B. License installation
C. VPN configuration
D. WLAN configuration
E. Firewall Roles
View answer
Correct Answer: C
Question #16
Which of these are supported by the Aruba Controller? (Select two)
A. SNMP
B. HSRP
C. AES Encryption
D. Blowfish encryption
E. BGP
View answer
Correct Answer: AC
Question #17
Which of the following would be appropriate for standalone MAC Authentication?
A. Guest User
B. Internal User
C. Barcode scanner
D. Admin user
E. Laptops
View answer
Correct Answer: C
Question #18
When would you use the Reject action in a firewall policy?
A. To let hackers know which ports are open on your firewall
B. To let your users know they they are in violation of corporate policies
C. To tell down stream routers to use a more appropriate router
D. To aid in troubleshooting firewall policy configuration
E. To let the system count the violations
View answer
Correct Answer: D
Question #19
Which ARM function converts APs with excess capacity into Air Monitors?
A. Airtime fairness
B. Coordinated access to a single channel
C. Co-channel interference mitigation
D. Client aware scanning
E. Band Steering
View answer
Correct Answer: C
Question #20
When configuring a guest WLAN via the WLAN section of the startup wizard, which security option is NOT available?
A. WEP encryption
B. Direct access to the internet with no captive portal
C. Captive portal with authentication via credentials
D. Captive portal with email registration
E. Captive Portal with no authentication or registration
View answer
Correct Answer: A

View The Updated Aruba Exam Questions

SPOTO Provides 100% Real Aruba Exam Questions for You to Pass Your Aruba Exam!

Get Aruba Practice Test

View Answers after Submission

Please submit your email and WhatsApp to get the answers of questions.

Note: Please make sure your email ID and Whatsapp are valid so that you can get the correct exam results.

Email:
Whatsapp/phone number:


Copyright © 2024. Designer by SPOTO Official Website. All Rights Reserved.