DON'T WANT TO MISS A THING?

Certification Exam Passing Tips

Latest exam news and discount info

Curated and up-to-date by our experts

Yes, send me the newsletter

CCNP 350-501 Exam Practice Made Easy: Latest Mock Exams, Cisco Service Provider SPCOR exam | SPOTO

Preparing for the Cisco Service Provider SPCOR exam (CCNP 350-501) is made easy with our latest mock exams and practice tests. This 120-minute exam is vital for CCNP and CCIE Service Provider Certifications, evaluating candidates on core service provider network technologies like core architecture, services, networking, automation, quality of services, security, and network assurance. Our comprehensive materials, including exam questions, sample questions, and mock exams, streamline exam practice and preparation. Access our exam dumps, exam questions and answers, and exam simulator to enhance your exam readiness. With a focus on exam practice and online exam questions, our resources ensure a smooth and effective preparation journey for the Cisco Service Provider SPCOR exam.
Take other online exams
Question #1
Which three outcomes occur if the prefix list is added to the neighbor? (Choose three.)
A. 192
B. 192
D. 192
E. 192
F. 192
View answer
Correct Answer: A
Question #2
R1 is connected to two service providers and is under a DDoS attack. Which statement about this design is true if URPF in strict mode is configured on both interfaces?
A. R1 drops all traffic that ingresses either interface that has a FIB entry that exits a different interface
B. R1 drops destination addresses that are routed to a null interface on the router
C. R1 permits asymmetric routing as long as the AS-PATH attribute entry matches the connected AS
D. R1 accepts source addresses on interface gigabitethernet0/1 that are private addresses
View answer
Correct Answer: A
Question #3
Which purpose of implementing NSF with this configuration is true?
A. The router uses NSF to handle RP switchover while allowing neighbor relationships to remain up
B. The router uses NSF to reduce neighbor-relationship downtime during RP switchover
C. The router uses NSF to load balance traffic on a routed EtherChannel
D. The router uses NSF to load balance traffic between two links, with the primary link alternating every 90 seconds
View answer
Correct Answer: B
Question #4
A network engineer is configuring customer edge routers to finalize a L2VPN over MPLS deployment. Assume that the AToM L2VPN service that connects the two CEs is configured correctly on the service provider network. Which action causes the solution to fail?
A. OSPF does not work with L2VPN services
B. The routing protocol network types are not compatible
C. A loopback with a /32 IP address has not been used
D. The xconnect statement has not been defined
View answer
Correct Answer: B
Question #5
An engineer is preparing to implement data plane security configuration. Which statement about this configuration is true?
A. Router 2 is the router receiving the DDoS attack
B. Router 1 must be configured with uRPF for the RTBH implementation to be effective
C. Router 1 is the trigger router in a RTBH implementation
D. Router 2 must configure a route to null 0 for network 192
View answer
Correct Answer: D
Question #6
BGPsec is implemented on R1, R2, R3, and R4. BGP peering is established between neighboring autonomous systems. Which statement about implementation is true?
A. BGP updates from the iBGP peers are appended with a community of local-as
B. BGP updates from the all BGP peers are appended with a community of no-export
C. BGP updates from the eBGP peers are appended with an additional AS path value that is statically set by the domain administrator
D. BGP updates from the eBGP peers are appended with a BGPsec attribute sequence that includes a public key hash and digital signature
View answer
Correct Answer: D
Question #7
In which way does router R1 operate differently than router R2?
A. R1 sends LSA types 5 and 7, while R2 sends type 1, 2, and 7 LSAs
B. R1 sends LSA type 2 only, while R2 sends type 1 and type 7 LSAs
C. R1 sends LSA type 2 only and R2 sends LSA type 1 only
D. R1 sends LSA types 1 and 2, while R2 sends type 1,2, and 7 LSAs
View answer
Correct Answer: A
Question #8
After you analyze your network environment, you decide to implement a full separation model for Internet access and MPLS L3VPN services. For which reason do you make this decision?
A. It enables EGP and IGP to operate independently
B. It enables you to choose whether to separate or centralize each individual service
C. It is easier to manage a system in which services are mixed
D. It requires only one edge router
View answer
Correct Answer: BE
Question #9
Refer to the exhibit Which effect of this configuration is true?
A. The two routers fail to form a neighbor relationship because they have different IS-IS area types
B. The two routers successfully form a neighbor relationship
C. The two routers fail to form a neighbor relationship because the authentication configuration is missing
D. The two routers fail to form a neighbor relationship because their system IDs are different
View answer
Correct Answer: D
Question #10
Which effect of this configuration is true?
A. It enables MPLS on the interface
B. It creates a pseudowire class named cisco
C. It enables AToM on interface gigabitethernet1/0
D. It enables tagging for VLAN 12 on the interface
View answer
Correct Answer: A
Question #11
Based on the show command output, which result is true after BGP session is established?
A. The IOS XR router advertises and accepts all routes to and from eBGP neighbor 192
B. The IOS XR router advertises all routes to the neighbor 192
C. No routes are accepted from the neighbor 192
D. The IOS XR router does not advertises any routes to the neighbor 192
View answer
Correct Answer: A
Question #12
Simulation 8 Refer to the exhibit. Solution R3 router bgp 65413 add ipv4 nei 2.2.2.2 allowas-in nei 4.4.4.4 allowas-in add ipv6 nei 2001:db8:4:4:4::4 allowas-in end copy run start ======================= R2 router bgp 65413 nei 1.1.1.1 as-override nei 3.3.3.3 as-override end copy run start ======================= R3 router bgp 65413 nei 10.3.4.2 remot 65412 nei 2001:db8:3:4::2 remot 65412 nei 2001:db8:4:4:4:4::4 remot 65412 nei 2001:db8:4:4:4:4::4 ebgp-multihop 10 add ip4 nei 10.3.4.2 act ex add ipv6 nei
A. ee the solution below
View answer
Correct Answer: A
Question #13
Router 1 was experiencing a DDoS attack that was traced to interface gigabitethernet0/1. Which statement about this configuration is true?
A. Router 1 accepts all traffic that ingresses and egresses interface gigabitethernet0/1
B. Router 1 drops all traffic that ingresses interface gigabitethernet0/1 that has a FIB entry that exits a different interface
C. Router 1 accepts source addresses that have a match in the FIB that indicates it is reachable through a real interface
D. Router 1 accepts source addresses on interface gigabitethernet0/1 that are private addresses
View answer
Correct Answer: B
Question #14
A customer of an ISP requests support to setup a BGP routing policy. Which BGP attribute should be configured to choose specific BGP speakers as preferred points for the customer AS?
A. lowest multi-exit discriminator
B. highest local preference outbound
C. lowest local preference inbound
D. highest local preference inbound
View answer
Correct Answer: D
Question #15
A network engineer is implementing a BGP protocol. Which effect of the local-as keyword in this configuration is true?
A. It enables peer 192
B. It enables peer 192
C. It enables peer 192
D. It enables peer 192
View answer
Correct Answer: B
Question #16
Why do Cisco MPLS TE tunnels require a link-state routing protocol?
A. The link-state database provides segmentation by area, which improves the path-selection process
B. The link-state database provides a data repository from which the tunnel endpoints can dynamically select a source ID
C. Link-state routing protocols use SPF calculations that the tunnel endpoints leverage to implement the tunnel
D. The tunnel endpoints use the link-state database to evaluate the entire topology and determine the best path
View answer
Correct Answer: D
Question #17
P3 and PE4 are at the edge of the service provider core and serve as ABR routers. Aggregation areas are on either side of the core. Which statement about the architecture is true?
A. To support seamless MPLS, the BGP route reflector feature must be disabled
B. If each area is running its own IGP, BGP must provide an end-to-end MPLS LSP
C. If each area is running its own IGP, the ABR routers must redistribute the IGP routing table into BGP
D. To support seamless MPLS, TDP must be used as the label protocol
View answer
Correct Answer: B
Question #18
A network engineer is implementing an OSPF configuration. Based on the output, which statement is true?
A. OSPFv3 does not run for IPv4 on FastEthernet0/0 until IPv6 routing is enabled on the router and IPv6 is enabled on interface FastEthernet0/0
B. In the ospfv3 1 area 1 ipv4 command, area 0 must be configured instead of area 1
C. OSPFv3 cannot be configured for IPv4; OSPFv3 works only for IPv6
D. “IPv6 routing not enabled” is just an informational message and OSPFv3 runs for IPv4 on interface FastEthernet0/0 anyway
View answer
Correct Answer: S
Question #19
An engineer is preparing to implement data plane security configuration. Which statement about this configuration is true?
A. Router 1 and Router 2 advertise the route to 192
B. All traffic to 192
C. All traffic is dropped
D. Router 1 drops all traffic with a local-preference set to 150
View answer
Correct Answer: A
Question #20
A mod-size service provider uses L2VPN as its standard for connectivity between offices. A small company wants the service provider to connect the company's two sites across the service provider core. To meet service requirements, the service provider must extend the layer 2 domain between the company's two locations. Which configuration must the engineer apply to implement an attachment circuit between the two sites using a VLAN tag of 12?
A. ption A
B. ption B
C. ption C
D. ption D
View answer
Correct Answer: A
Question #21
Refer to the exhibit. Refer to the exhibit. An engineer configured several network devices to run REST APIs. After testing, the organization plans to use REST APIs throughout the network to manage the network more efficiently. What is the effect if this script?
A. t returns an AAA users with the last name CiscoTest
B. t creates a class map named aaauser with traffic tagged from AAA
C. t queries the local database to find a user named aaaUser
D. t adds the user CiscoTest to the AAA database located at 192
View answer
Correct Answer: A

View Answers after Submission

Please submit your email and WhatsApp to get the answers of questions.

Note: Please make sure your email ID and Whatsapp are valid so that you can get the correct exam results.

Email:
Whatsapp/phone number:


Copyright © 2024. Designer by SPOTO Official Website. All Rights Reserved.