DON'T WANT TO MISS A THING?

Certification Exam Passing Tips

Latest exam news and discount info

Curated and up-to-date by our experts

Yes, send me the newsletter

CCNP 300-615 Practice Tests & Real Exam Dumps 2024 Updated, Cisco Data Center 300-615 DCIT | SPOTO

Prepare effectively for the CCNP 300-615 exam with our updated practice tests and real exam dumps tailored for Cisco Data Center 300-615 DCIT certification. Our exam materials cover troubleshooting scenarios across network, compute platforms, storage network, automation, management, and operations within a data center infrastructure. Access our free test to assess your readiness and proficiency. Utilize our exam dumps and exam answers to reinforce your preparation strategy. Dive into the Troubleshooting Cisco Data Center Infrastructure course to acquire the necessary skills and knowledge required for success. With our exam simulator and online exam questions, simulate real exam environments to boost your confidence on exam day. Trust SPOTO for top-notch resources to ensure you're fully prepared to excel in your CCNP 300-615 certification journey.
Take other online exams
Question #1
An engineer must replace a failed memory on a Cisco UCS B-Series Blade Server. After the replacement was done, the server has a “resolve slot” warning. Which server maintenance action resolves the issue?
A. Perform diagnostic interrupt on the server
B. Re-acknowlegement the server
C. Reset the server
D. Decomission the server
View answer
Correct Answer: AD

View The Updated 300-615 Exam Questions

SPOTO Provides 100% Real 300-615 Exam Questions for You to Pass Your 300-615 Exam!

Get 300-615 Practice Test
Question #2
DRAG DROP A firmware upgrade on a fabric interconnect fails. A bootflash contains a valid image. Drag and drop the recovery steps from the left onto the correct order on the right. Select and Place:
A. Mastered
B. Not Mastered
View answer
Correct Answer: C
Question #3
An engineer attempts to register Cisco UCS Manager to Cisco UCS Central, but the registration fails. The engineer can ping Cisco UCS Central from UCS Manager. Which two actions must the engineer attempt to resolve the problem? (Choose two.)
A. Synchronize the date and time to NTP for Cisco UCS Central and the Cisco UCS domains
B. Apply the UCS Central license to UCS Central
C. Place Cisco UCS Manager on the same subnet as Cisco UCS Central
D. Allow port 443 between Cisco UCS Manager and Cisco UCS Central
E. Allow port 9443 between Cisco UCS Manager and Cisco UCS Central
View answer
Correct Answer: B
Question #4
A network engineer configures an EEM script to get a syslog notification after a configuration change. This message appears when the engineer must make a new configuration to this switch. Which configuration did the engineer neglect to apply in the script for it to function properly?
A. event cli match ‘configure terminal’
B. event policy-default count 1 time 100
C. event syslog occurs 10
D. action 2
View answer
Correct Answer: B
Question #5
Topic 1An engineer troubleshoots a fabric discovery failure. Which two requirements about switch connectivity must be verified tosolve the problem? (Choose two.)
A. A Cisco APIC must be attached to a spine node only
B. A Cisco APIC must be attached to leaf nodes
C. Spine nodes must connect to other spine nodes
D. A Cisco APIC must be dual-attached to two separate spine nodes
E. Leaf nodes must connect to spine nodes only
View answer
Correct Answer: BE
Question #6
A server administrator attempts to change the Cisco IMC KVM certificate to one signed by a private CA, but the certificate is not being accepted. What can cause this process to fail?
A. using a certificate with a password-protected private key
B. RSA encryption being used in the generation of the certificate
C. AES encryption being used in the generation of the certificate
D. public IP addres of the Cisco IMC not being included in the SAN
View answer
Correct Answer: D
Question #7
Topic 1 The HSRP configuration in the exhibit fails to function. Which action resolves this issue?
A. Enable IP redirects
B. Set the MTU to 1500 bytes
C. Configure HSRP version 2
D. Configure the same HSRP group on both devices
View answer
Correct Answer: A
Question #8
Topic 1The Cisco Nexus switch is connected to a peer switch that is not running Cisco NX-OS. The switches are connected usingport channel and are experiencing packet loss. Which action should be performed on the Cisco Nexus switch ports toresolve this issue?
A. Turn on lacp suspend-individual
B. Turn on lacp graceful-convergence
C. Turn off lacp graceful-convergence
D. Turn off lacp suspend-individual
View answer
Correct Answer: C
Question #9
Topic 1 The HSRP instance on both switches is showing as active. Which action resolves the issue?
A. Configure the HSRP timers to be the same
B. Allow VLAN 100 between the switches
C. Configure the IP address of N9K-B on the same subnet as N9K-A
D. Configure preempt on only one of the switches
View answer
Correct Answer: B
Question #10
Topic 1 An OSPF adjacency between Router-A and Router-B fails to reach the FULL state. Which actionresolves the issue?
A. Adjust the MTU on Router-A to 1600
B. Disable the check of the MTU value
C. Set the OSPF media type to point-to-point
D. Adjust the MTU on Router-B to 1604
View answer
Correct Answer: B
Question #11
DRAG DROP Drag and drop the Cisco UCS SNMP fault types from the left onto the correct issues on the right. Select and Place:
A. Mastered
B. Not Mastered
View answer
Correct Answer: A
Question #12
Topic 1A mission-critical server is connected to site
A. Connectivity to this server is lost from site B because the MAC route is missing in the OTV VDC of the Cisco Nexus 7000 in site B due to MAC aging
B. Unknown unicast flooding is not allowed
C. Use the otv flood mac <> command to selectively flood traffic for a given MAC
D. Use the otv isis bfd <> command to configure BFD protocol
View answer
Correct Answer: B
Question #13
Topic 1 After a failover occurs, which two actions must be performed on Switch-B to manually preempt theoperational primary role back to Switch-A? (Choose two.)
A. Configure the local vPC role priority to have a lower value than Switch-A
B. Configure the local vPC role priority to have a higher value than Switch-A
C. Disable and then re-enable the vPC peer-keepalive link
D. Configure the local vPC role priority to have the same value as Switch-A
E. Disable and then re-enable the vPC peer link
View answer
Correct Answer: BE
Question #14
Topic 1A vPC Type-1 inconsistency between two vPC peers in a VXLAN EVPN setup is discovered. Which two actions need to beattempted to resolve the issue? (Choose two.)
A. Configure the NVE interfaces to be Up on both switches
B. Set a different distributed gateway virtual MAC address
C. Set a different secondary IP addresses on NVE source-interface
D. Configure the same VNI to multicast group maping
E. Set a different primary IP addresses on NVE source-interface
View answer
Correct Answer: AD

View Answers after Submission

Please submit your email and WhatsApp to get the answers of questions.

Note: Please make sure your email ID and Whatsapp are valid so that you can get the correct exam results.

Email:
Whatsapp/phone number:


Copyright © 2024. Designer by SPOTO Official Website. All Rights Reserved.