DON'T WANT TO MISS A THING?

Certification Exam Passing Tips

Latest exam news and discount info

Curated and up-to-date by our experts

Yes, send me the newsletter

CCNP 300-510 Certification Exam Questions & Practice Tests, Cisco Service Provider 300-510 SPRI | SPOTO

Prepare effectively for the CCNP 300-510 certification exam with our comprehensive practice tests and exam materials. The Implementing Cisco Service Provider Advanced Routing Solutions v1.0 (SPRI 300-510) exam, associated with CCNP Service Provider Certification, evaluates candidates on implementing advanced routing technologies such as routing protocols, policy language, MPLS, and segment routing. Our exam resources include sample questions, mock exams, and exam dumps designed to simulate the actual exam environment and enhance your exam practice. Access our free test to evaluate your readiness and identify areas for improvement. Utilize our exam answers and detailed explanations to reinforce your understanding and boost confidence. Trust SPOTO for reliable exam preparation resources, including online exam questions and exam simulators, to help you succeed in the CCNP 300-510 exam.
Take other online exams
Question #1
You have configured MSDP peering between two autonomous systems that pass traffic between two sites, but the peering has failed to come up. Which task do you perform to begin troubleshooting the problem?
A. Verify that multicast has been disabled globally
B. Verify that PIM-DM is configured on the source interface
C. Verify that both source interfaces are reachable from both peers
D. Verify that the two MSDP peers allow asymmetric routing
View answer
Correct Answer: C

View The Updated 300-510 Exam Questions

SPOTO Provides 100% Real 300-510 Exam Questions for You to Pass Your 300-510 Exam!

Get 300-510 Practice Test
Question #2
Refer to the exhibit. CE1 and CE2 cannot communicate through the service provider BGP peering is established between PE1 and PE2. IS-IS is the only routing protocol running in the service provider core. What step can be done to troubleshoot the issue?
A. Switch the IGPs running in the core from IS-IS to OSPF to support a Cisco MPLS TE tunnel from PE1 to PE2
B. Configure BGP between CE and PE routers
C. Confirm that IS-IS is running with metric-style narrow
D. Verify the MPLS LSPs
View answer
Correct Answer: D
Question #3
After you change the IP address on an IOS XR router, you cannot ping the new address. Which step did you forget to complete?
A. commit the configuration
B. roll back the configuration
C. merge the configuration
D. save the running configuration
View answer
Correct Answer: B
Question #4
Which feature is used in multicast routing to prevent loops?
A. STP
B. inverse ARP
C. RPF
D. split horizon
View answer
Correct Answer: C
Question #5
Refer to the exhibit. Router 1 has established an SR-TE tunnel with router 2. Which statement describes this configuration?
A. Router 1 has a list of labels used to explicitly lay out a path to router 2
B. Router 1 and router 2 have a bidirectional tunnel set up with dynamic path selection
C. Router 1 is the head-end tunnel and has dynamically chosen a path to router 2
D. Router 2 is the head-end tunnel and has explicitly set a path to router 1
View answer
Correct Answer: B
Question #6
Refer to the exhibit. A service provider technician is working on a multicast issue for a customer. While checking the multicast table, the technician notices that no flags are present for the (1.1.1.1, 239.1.1.1) entry, yet flags are present for the (1.1.1.1, 232.1.1.1) entry. Which factor might explain this issue?
A. Only the administratively scoped range is permitted
B. Only ASM is permitted
C. Only the default SSM range is permitted
D. Only GLOP is permitted
View answer
Correct Answer: C
Question #7
Refer to the exhibit. Which effect of this configuration is true?
A. It sets the keepalive timer to 30 seconds and the hold timer to 240 seconds
B. It sets the keepalive timer to 30 milliseconds and the hold timer to 240 milliseconds
C. It sets the hold timer to 30 milliseconds and the keepalive timer to 240 milliseconds
D. It sets the hold timer to 30 seconds and the keepalive timer to 240 seconds
View answer
Correct Answer: A
Question #8
Refer to the exhibit. R1 is directly connected to R2 and R3. R1 is in BGP AS 123, R2 is in BGP AS 2, and R3 is in BGP AS 3. Assume that there is no connectivity issue between R1, R2 and R1, R3. Which result between BGP peers R1, R2 and R1, R3 is true?
A. The BGP session does not come up between R1 and R2 and between R1 and R3
B. The BGP session comes up between R1 and R2 and between R1 and R3
C. The BGP session comes up between R1 and R3, but not between R1 and R2
D. The BGP session comes up between R1 and R2, but not between R1 and R3
View answer
Correct Answer: C
Question #9
Refer to the exhibit. A network engineer implemented this segment routing configuration. Which statement about the output is true?
A. This range conflicts with the segment routing local block range
B. The device must be reloaded for these ranges to be allocated and used
C. The default segment routing global block range is being used on this device
D. A nondefault segment routing global block range is being used on this device
View answer
Correct Answer: AD
Question #10
Refer to the exhibit. An engineer is troubleshooting an OSPF issue. Router 1 has a neighbor relationship with router 2. Only router 1 classful EIGRP routes can be seen on router 2. In order for all EIGRP routes to be redistributed correctly, which action should be taken?
A. Router 1 must have the keyword subnets included in the redistribution command for all EIGRP routes to be redistributed
B. Router 1 must remove the AS number 1 from the redistribution command for all EIGRP routes to be redistributed
C. Router 1 must have the keyword ospf-metric included in the redistribution command for all EIGRP routes to be redistributed
D. Router 1 must have the keyword metric-type 1 included in the redistribution command for all EIGRP routes to be redistributed
View answer
Correct Answer: CD
Question #11
Which task is performed when troubleshooting LDP?
A. Execute the ping utility to generate information about the MAC addresses used along the path
B. Verify that MPLS is disabled globally and enabled on the necessary interfaces in a per-interface basis
C. Execute the traceroute utility to generate information about the labels used along the path
D. Verify that Cisco Express Forwarding has been disabled on the network
View answer
Correct Answer: B
Question #12
Refer to the exhibit. Which task must you perform on interface g1/0/0 to complete the SSM implementation?
A. configure OSPFv3
B. enable CDP
C. disable IGMP
D. configure IGMPv3
View answer
Correct Answer: A
Question #13
Which two statements about route reflectors are true? (Choose two.)
A. Routes received from nonclient peers are reflected to route reflector clients as well as nonclient peers
B. Routes received from nonclient peers are reflected to route reflector cluster as well as OSPF peers
C. If a router received an iBGP route with the originator-ID attribute set to its own router ID, the route is discarded
D. Routes received from a route reflector client is reflected to other clients and nonclient peers
E. If a route reflector receives a route with a cluster-list attribute containing a different cluster ID, the route is discarded
View answer
Correct Answer: C
Question #14
Refer to the exhibit. A network operator is getting the route for 10.11.11 0/24 from two upstream providers on #XR3. The network operator must configure #XR3 to force the 10.11.11.0/24 prefix to route via next hop of 10.0.0.9 as primary when available. Which of these can the operator use the routing policy language for, to enforce this traffic forwarding path?
A. weight of 0 on the prefix coming from 192
B. lower local preference on the prefix coming from 192
C. higher local preference on the prefix coming from 192
D. weight of 100 on the prefix coming from 192
View answer
Correct Answer: C
Question #15
For which reason can two BGP peers fail to establish a neighbor relationship?
A. Their BGP send-community strings are misconfigured
B. Their BGP timers are mismatched
C. Their remote-as numbers are misconfigured
D. They are both activated under an IPv4 address family
View answer
Correct Answer: B
Question #16
Which two routing protocols have extensions capable of running SRv6? (Choose two.)
A. OSPF
B. BGP
C. RIP
D. IGRP
E. EIGRP
View answer
Correct Answer: C
Question #17
Refer to the exhibit. Router 1 is a core ABR in a Cisco Unified MPLS environment. All of the router 1 BGP peers are established, but traffic between customers is failing. Which BGP configuration must be added to the configuration?
A. It must be configured for graceful restart
B. It must be configured with a route reflector
C. It must be configured with send labels
D. It must be configured with PIC edge
View answer
Correct Answer: C
Question #18
A network consultant is troubleshooting IS-IS instances to identify why a routing domains is having communication problems between the two instances. Which description of the possible cause of issues in the routing domain is true?
A. The same interface cannot be advertised in two different IS-IS instances
B. The IS-IS “ISP” and “ISP2” instances are unrelated and unable to intercommunicate
C. The configured IS-IS NSEL value is not allowing the routing systems to establish a neighborship
D. The interface mode ip router is-is command was not included in the script
View answer
Correct Answer: A

View Answers after Submission

Please submit your email and WhatsApp to get the answers of questions.

Note: Please make sure your email ID and Whatsapp are valid so that you can get the correct exam results.

Email:
Whatsapp/phone number:


Copyright © 2024. Designer by SPOTO Official Website. All Rights Reserved.