DON'T WANT TO MISS A THING?

Certification Exam Passing Tips

Latest exam news and discount info

Curated and up-to-date by our experts

Yes, send me the newsletter

CCNA 200-301 Practice Tests & Real Exam Dumps 2024 Updated, Cisco Certified Network Associate | SPOTO

Prepare for the 200-301 CCNA exam with our comprehensive practice tests and exam materials. Our free test samples cover a wide range of topics, including router and switch configurations, ensuring you're well-equipped for both theoretical and practical aspects of networking. Dive into our mock exams and exam questions to simulate the testing environment and sharpen your skills. With our exam dumps and online exam questions, you'll gain confidence in your knowledge and abilities. Whether you're seeking exam preparation or looking for exam answers, our resources provide valuable support. Maximize your success with our exam questions and answers, designed to help you excel in your CCNA journey.
Take other online exams
Question #1
What is the primary effect of the spanning-tree portfast command?
A. it enables BPDU messages
B. It minimizes spanning-tree convergence time
C. It immediately puts the port into the forwarding state when the switch is reloaded
D. It immediately enables the port in the listening state
View answer
Correct Answer: A
Question #2
What are two characteristics of a controller-based network? (Choose two)
A. The administrator can make configuration updates from the CLI
B. It uses northbound and southbound APIs to communicate between architectural layers
C. It moves the control plane to a central point
D. It decentralizes the control plane, which allows each device to make its own forwarding decisions
E. It uses Telnet to report system issues
View answer
Correct Answer: AC
Question #3
Which network allows devices to communicate without the need to access the Internet?
A. 1729
B. 172
C. 192
D. 209
View answer
Correct Answer: B
Question #4
How does HSRP provide first hop redundancy?
A. It load-balances traffic by assigning the same metric value to more than one route to the same destination m the IP routing table
B. It load-balances Layer 2 traffic along the path by flooding traffic out all interfaces configured with the same VLAN
C. It forwards multiple packets to the same destination over different routed links n the data path
D. It uses a shared virtual IMC and a virtual IP address to a group of routers that serve as the default gateway for hosts on a LAN
View answer
Correct Answer: C
Question #5
Which action is taken by a switch port enabled for PoE power classification override?
A. When a powered device begins drawing power from a PoE switch port a syslog message is generated
B. As power usage on a PoE switch port is checked data flow to the connected device is temporarily paused
C. If a switch determines that a device is using less than the minimum configured power it assumes the device has failed and disconnects
D. If a monitored port exceeds the maximum administrative value for power, the port is shutdown and err-disabled
View answer
Correct Answer: D
Question #6
Refer to Exhibit. An engineer is configuring the NEW York router to reach the Lo1 interface of the Atlanta router using interface Se0/0/0 as the primary path. Which two commands must be configured on the New York router so that it can reach the Lo1 interface of the Atlanta router via Washington when the link between New York and Atlanta goes down? (Choose two)
A. ipv6 router 2000::1/128 2012::1
B. ipv6 router 2000::1/128 2012::1 5
C. ipv6 router 2000::1/128 2012::2
D. ipv6 router 2000::1/128 2023::2 5
E. ipv6 router 2000::1/128 2023::3 5
View answer
Correct Answer: D
Question #7
A frame that enters a switch fails the Frame Check Sequence. Which two interface counters are incremented? (Choose two)
A. runts
B. giants
C. frame
D. CRC
E. input errors
View answer
Correct Answer: DE
Question #8
Which mode must be used to configure EtherChannel between two switches without using a negotiation protocol?
A. on
B. auto
C. active
D. desirable
View answer
Correct Answer: DE
Question #9
An engineer is asked to protect unused ports that are configured in the default VLAN on a switch. Which two steps will fulfill the request? (Choose two)
A. Configure the ports in an EtherChannel
B. Administratively shut down the ports
C. Configure the port type as access and place in VLAN 99
D. Configure the ports as trunk ports
E. Enable the Cisco Discovery Protocol
View answer
Correct Answer: A

View Answers after Submission

Please submit your email and WhatsApp to get the answers of questions.

Note: Please make sure your email ID and Whatsapp are valid so that you can get the correct exam results.

Email:
Whatsapp/phone number:


Copyright © 2024. Designer by SPOTO Official Website. All Rights Reserved.