Where Can I Get Valid CCIE R&S Written Practice Questions?

CCNA 200-301

CCNA 200-301

CCNP Enterprise

CCNP Enterprise

CCNP Security

CCNP Security

CCIE Enterprise Lab

CCIE Enterprise Lab

CCIE Security Lab

CCIE Security Lab

CCNP Service Provider

CCNP Service Provider

CCNP Data Center

CCNP Data Center

CCNP Collaboration

CCNP Collaboration

CCIE DC Lab

CCIE DC Lab

ic_r
ic_l
Where Can I Get Valid CCIE R&S Written Practice Questions?
images

CCIE Routing and Switching Written Exam Overview:

You are required to pass the two-hour, written qualification exam so as to validate professionals have the expertise in order to configure, validate, and troubleshoot complex enterprise network infrastructure; understand about how the infrastructure components interoperate and translate efficient requirements into specific device configurations

Before you appear the CCIE Routing and Switching certification exam, you might have certain doubts in your mind regarding the pattern of the test, the types of questions which would be asked in it, the difficulty level of the questions and time would be required to complete the questions. These CCIE Routing and Switching sample questions and demo exam would help you in removing these doubts and prepare you in order to take the test. 

The best approach in order to pass your Cisco exam is to challenge and improve your knowledge. Also, if you could have the courses offered by some reputed training providers, like the SPOTO, you would be able to ease up your certification. In order to test your learning and identify improvement areas with the genuine exam format, we suggest you have practice with reliable Cisco Certified Internetwork Expert Routing and Switching Practice Exam. The practice test is considered to be one of the most important elements of your Cisco CCIE Routing and Switching Written Exam strategy so as to discover your strengths and weaknesses, to improve your skills of time management and to get an idea of the score that you could expect.

Cisco 400-101 (CCIE RS) Sample Questions:

01. Which circumstance could cause packet loss due to a microburst?

a) process switching 

b) a blocked spanning-tree port

c) slow convergence 

d) insufficient buffers

02. In GETVPN, which key would be used to secure the control plane?

a) message encryption key (MEK)

b) content encryption key (CEK)

c) Traffic Encryption Key (TEK)

d) Key Encryption Key (KEK).

03. Which IPv6 prefix is to be utilized for 6to4 tunnel addresses?

a) 5f00. . /8

b) 2002. . /16

c) 2001. . /32

d) 2001. . /23

e) 3ffe. . /16

04. An IP SLA fails in order to generate statistics. How can you fix the problem?

a) Removing the IP SLA schedule statement from the router configuration and re-enter it.

b) Reloading the router configuration.

c) Adding the verify-data command to the router configuration. 

d) Adding the debug IP SLA trace command to the router configuration.

e) Adding the debug IP SLA error command to the router configuration.

05. Which option is going to be correct match criteria for policy-based routing?

a) interface

b) interface type

c) length 

d) cost

06. Which two DHCP messages would be always sent as broadcast? (Choose two options).

a) DHCPOFFER

b) DHCPDISCOVER

c) DHCPRELEASE

d) DHCPREQUEST

e) DHCPDECLINE 

07. Which two statements about HSRP are true? (Choose two options).

a) It supports unique virtual MAC addresses.

b) Its multicast virtual MAC is 0000.5E00.01xx.

c) Its default configuration allows for pre-emption.

d) It supports tracking.

e) Its virtual MAC is 0000.0C07.Acxx.

08. For which feature would be addressing family "rtfilter" used?

a) Enhanced Route Refresh

b) Unified MPLS

c) Route Target Constraint

d) MPLS VPN filtering 

09. What is considered to be a key advantage of Cisco GET VPN over DMVPN?

a) Cisco GET VPN does not require a secondary overlay infrastructure of routing.

b) Cisco GET VPN supports authentication of the certification for tunnel establishment.

c) Cisco GET VPN has an enhanced anti-replay mechanism.

d) Cisco GET VPN provides deployment of zero-touch of IPSEC VPNs.

10. Which statement about VRRP is considered true?

a) It supports IPv4 and IPv6.

b) It could be configured with HSRP on a switch or switch stack.

c) It supports load balancing.

d) It supports encrypted authentication.

If you want to have more such questions, you could join the SPOTO CCIE Trainings and gain their best and reliable study dumps.